Qtx TETRA Manuel utilisateur

TETRA

4-in-1 LIGHT EFFECT

Item ref: 151.608UK

User Manual

Version 1.0

Caution: Please read this manual carefully before operating

Damage caused by misuse is not covered by the warranty

151.608UK User Manual

Introduction

Thank you for your purchase of the QTX TETRA light effect. This model can deliver an extra wide array of

colourful projections coupled with powerful UV/strobe and laser effects. Please read and keep this user

manual to get the best from your purchase and avoid damage through misuse

SAFETY SYMBOL AND MESSAGE CONVENTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

AVIS

RISQUE DE CHOC ELECTRIQUE

NE PAS OUVRIR

This symbol indicates that dangerous voltage constituting a risk of

electric shock is present within this unit

This symbol indicates that there are important operating and

maintenance instructions in the literature accompanying this unit.

Warning

To prevent the risk of fire or electric shock, avoid contact with moisture or humid environments.

No user serviceable parts inside –Do not open the case –refer all servicing to qualified service personnel.

Safety

Check for correct mains voltage and condition of power lead before connecting to a power outlet.

Placement

•Use the included mounting bracket to fix to a stand or lighting truss

•Use secondary safety fixings if mounting overhead.

•Ensure adequate airflow around the fixture housings

•Ensure adequate access to controls and connections

•Do not aim LED or laser output directly into line of sight, as this can result in eye injury.

Cleaning

•Use a soft cloth with a neutral detergent to clean the casing as required

•Do not use strong solvents for cleaning the unit

In the box

Please open the package carefully and check that all contents are present and in good condition.

Contact your retailer if any part is missing or broken.

•TETRA LED & laser light effect

•I.R. remote control

•Mounting bracket

•UK mains plug to IEC lead

151.608UK User Manual

Rear panel

Installation

Install the TETRA free standing on a stable surface or suspended from a lighting stand or truss.

When mounting to a stand or truss, use the included adjustable fixing bracket and ensure that a safety wire is

used if mounting overhead.

If the TETRA is to be operated by DMX control, connect the DMX control signal to the DMX IN connector using

an XLR lead and connect further DMX fixtures being controlled from the DMX OUT connector.

Connect mains power to the TETRA using the supplied IEC lead or equivalent, ensuing the supply voltage is

correct and capable of the load demand.

Remote control

The TETRA is supplied with an infra-red remote control for quick operation.

This is powered by a CR2025 button cell, which should be engaged by pulling out the plastic tab.

Point the remote towards the front of the TETRA housing, where the I.R. receiver is located.

The remote controls are explained in the diagram below

151.608UK User Manual

Onboard Menu

For more detailed setup and operation, the TETRA has an onboard control panel at the rear.

Using the MENU, UP, DOWN, ENTER buttons to navigate gives in-depth control of the internal functions.

The onboard control menu functions are described in the table below.

Mode

Display

Function

Press Enter

xxx

 

DMX start address

xx



UV On



UV Off

xx



Laser off



Laser Auto program

 rotation speed



Red only



Green only



Red + Green combined

 - 

Red/Green Auto programs

xx



Red fireball

 rotation speed



Green fireball



Blue fireball



Colour change fireball

 colour speed

 rotation speed



Strobe fireball

 strobe speed

 rotation speed



Auto fireball

 colour speed

 rotation speed

xx



White flood off



White flood on

 

White strobe fast to slow

 x



Red water effect

 rotation speed



Green water effect



Blue water effect



White water effect



Colour water fx 4 step

 colour speed

 rotation speed



Colour water fx 30 step

 colour speed

 rotation speed



Strobe water effect

 strobe speed

 rotation speed



Colour water 4 & 30 step

 colour speed

 rotation speed

xx



Auto Mode 1



Auto Mode 2

xx

 

Sound Mode 1 (last 2 digits are beat step 1-20)

 

Mic sensitivity

xx

 

Sound Mode 2 (last 2 digits are beat step 1-20)

 

Mic sensitivity

Standalone operation

As described in the menu above, the TETRA can be operated in standalone mode by setting the operation of

water effect, fireball, UV and white flood/strobe LEDs. Various preset, auto and sound-activated modes can

also be accessed using the I.R. remote control.

151.608UK User Manual

DMX operation

The TETRA light effect is compatible with standard DMX512 control.

Connect a DMX controller to the TETRA using an XLR DMX lead into the DMX IN connector.

Connect further DMX light fixtures that are being controlled from the DMX OUT connector to the DMX IN of

each fixture in a daisy-chain.

Set the DMX start address of the TETRA and all other lighting fixtures in the chain to accommodate all the

required channels for each. The TETRA has 11 DMX channels and the table below is described with the DMX

start address set to 

DMX Channels

Channel

Value

Function

000 - 024

Water wave LED off

025 - 255

Water wave step through colours

000 - 009

White LED off

010 - 255

White LED on

000 - 009

Fireball off

010 - 044

Fireball Red

045 - 079

Fireball Green

080 - 114

Fireball Blue

115 - 149

Fireball Red + Green

150 - 184

Fireball Green + Blue

185 - 219

Fireball Red + Blue

220 - 255

Fireball Red + Green + Blue

000 - 009

Laser off

010 - 099

Laser Red

100 - 199

Laser Green

200 - 255

Laser Red + Green

000 - 009

UV off

010 - 255

UV on

000 - 007

All effects on

008 - 255

Combinations of 1, 2, 3 or 4 effects

000 - 009

Strobe off

010 - 255

Strobe fast to slow

000 - 009

Water wave motor off

010 - 255

Water wave motor fast to slow

000 - 009

Fireball motor off

010 - 255

Fireball motor fast to slow

000 - 009

Laser motor off

010 - 127

Laser motor fast to slow clockwise

128 - 255

Laser motor slow to fast anticlockwise

000 - 050

Manual setting from DMX channels 1-10

051 - 150

Auto program 1

151 - 200

Auto program 2

201 - 250

Sound program 1

251 - 255

Sound program 2

151.608UK User Manual

Specifications

Power supply

110-240Vac, 50/60Hz (IEC)

Power consumption

30W

Fuse rating

LED: power

6 x 3W moonflower, 4W RGBW ripple, 4 x 2W UV/Strobe

Laser power

30mW + 100mW (green + red)

Laser colour

Green (523nm), red (650nm)

Laser class

DMX connection

XLRM in, XLRF out

DMX channels

Dimensions

270 x 160 x 110mm

Weight

1.45kg

Disposal: The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical or

Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.

The goods must be disposed of according to your local council guidelines.

Errors and omissions excepted.

Table des matières

Autres manuels Qtx Matériel de DJ

Manuels Matériel de DJ populaires d'autres marques

ALPHA LITE

ALPHA LITE ALPHA 1500 Manuel du propriétaire

Chauvet

Chauvet OVATION E-930VW Manuel utilisateur

Zumtobel

Zumtobel APHRODITE Home Manuel utilisateur

Snow Masters

Snow Masters Zig Oscillator Manuel utilisateur

EuroLite

EuroLite 50530554 Manuel utilisateur

Beamz

Beamz BUV243 Manuel utilisateur

thomann

thomann Stairville DJ Lase 40-G MK-III Manuel utilisateur

Eagletone

Eagletone 6 Eyes Flower Manuel utilisateur

EuroLite

EuroLite FLD-1508 Manuel utilisateur

Technical Pro

Technical Pro LG8xSEA Manuel utilisateur

JB Systems

JB Systems Lounge Laser DMX Manuel utilisateur

Lightmaxx

Lightmaxx Vega Halo 90 Manuel utilisateur

Elation

Elation FUZE WASH Z350 Manuel utilisateur

Maverick

Maverick MK3 WASH Manuel utilisateur

Infinity

Infinity TF-260C7 Fresnel Manuel utilisateur

Chauvet

Chauvet EVE E-50Z Manuel utilisateur

Eliminator Lighting

Eliminator Lighting E 138 Manuel utilisateur

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manuel utilisateur