QSC CMS-5000 Manuel utilisateur

TD-001576-01-A

*TD-001576-01*

Cinema Media Server

User Manual

Cinema Media Server CMS-5000

TD-001576-01-A

Explanation Of Terms And Symbols

The term “WARNING!” indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily injury or

death.

The term “CAUTION!” indicates instructions regarding possible damage to physical equipment. If these instructions are not followed, it

may result in damage to the equipment that may not be covered under the warranty.

The term “IMPORTANT!” indicates instructions or information that are vital to the successful completion of theprocedure.

The term "NOTE" is used to indicate additional useful information.

The intent of the lightning ﬂash with arrowhead symbol in a triangle is to alert the user to the presence of un-insulated

"dangerous" voltage within the product's enclosure that may be of sufﬁcient magnitude to constitute a risk of electric shock

to humans.

The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of important safety, and

operating and maintenance instructions in this manual.

Important Safety Instructions

WARNING!TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

Elevated Operating Ambient – The ambient operating temperature of the installation environment may be greater than

room ambient. Consideration should be given to ensure that the maximum operating temperature range (0°C to 50°C, 32°F

to 122°F ) is not exceeded. Reduced Air Flow – Installation of the equipment should be such that the amount of air ﬂow

required for safe operation of the equipment is not compromised.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Do not submerge the apparatus in water or liquids.

7. Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near or into the apparatus.

8. Clean only with a dry cloth.

9. Install in accordance with the manufacturer's instructions.

10. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers) that produce

heat.

11. Only use attachments/accessories speciﬁed by the manufacturer.

12. Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any way, such

as liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

13. Adhere to all applicable local codes.

14. Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.

Maintenance and Repair

WARNING!Advanced technology, e.g., the use of modern materials and powerful electronics, requires specially adapted

maintenance and repair methods. To avoid a danger of subsequent damage to the apparatus, injuries to persons and/or

the creation of additional safety hazards, all maintenance or repair work on the apparatus should be performed only by a

QSC authorized service station or an authorized QSC International Distributor. QSC is not responsible for any injury, harm

or related damages arising from any failure of the customer, owner or user of the apparatus to facilitate thoserepairs.

iii

TD-001576-01-A

Lithium Battery Warning

WARNING!THIS EQUIPMENT CONTAINS A NON-RECHARGEABLE LITHIUM BATTERY. LITHIUM IS A CHEMICAL

KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER OR BIRTH DEFECTS. THE NON-RECHARGEABLE LITHIUM

BATTERY CONTAINED IN THIS EQUIPMENT MAY EXPLODE IF IT IS EXPOSED TO FIRE OR EXTREME HEAT. DO NOT

SHORT CIRCUIT THE BATTERY. DO NOT ATTEMPT TO RECHARGE THE NON-RECHARGEABLE LITHIUM BATTERY.

THERE IS A RISK OF EXPLOSION IF THE BATTERY IS REPLACED BY AN INCORRECT TYPE. BATTERY REPLACEMENT

IS PROHIBITED!

Regulatory Information

FCC Statement

NOTE:NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCCRules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

DCI/FIPS Security Compliance

The CMS-5000 is a FIPS-140-2 Certiﬁed device. It contains cryptographic devices and keys and must be handled correctly while in use

and when removed from service. The end user of the CMS-5000 is classiﬁed by FIPS as a Cryptographic Ofﬁcer and is responsible for

placing and maintaining the projector system into a FIPS approved mode. In this capacity you agree to the following guidelines:

1. Do not attempt to dismantle or reverse engineer the device. Any attempt to gain access to the modules enclosed in the secure

environment may result in loss of functionality and will void any warranty.

2. Ensure that at least two tamper seals are present on the CMS-5000 security module. Any attempt to remove, alter or replace the

tamper label seals on the CMS-5000 secure enclosure will void the warranty.

3. The user assumes responsibility to change the standard passwords installed by the factory.

4. The user assumes responsibility for the protection of keys (KDMs) and the protection of passwords used to access the CMS-5000.

5. Ensure that one or more external tamper seals are afﬁxed to the surface between the CMS-5000 and the projector body.

6. Perform or monitor the marriage between the CMS-5000 and the projector.

7. At end-of-life, perform or monitor the physical removal of the battery by separating the battery from the printed circuit board. The

battery and the CMS-5000 should be disposed of in accordance with local or national legislation.

Product End of Life Information

This product was designed and built by QSC to provide many years of service, and is backed by our commitment to provide high-quality

support. When it eventually reaches the end of its serviceable life, it should be disposed of in accordance with local or national legislation.

If you wish to discard electronic equipment, please contact your dealer or supplier for further information.

NOTE:NOTE:The manufacturing date can be derived from the serial number which will have the format CWWYYxxxx (9 characters)

or xxxxYYWWxxxxxx (14 characters) where 'YY' is the year of manufacture (20 = 2020) and 'WW' is the calendar week

ofmanufacture.

TD-001576-01-A

RoHS Statement

The QSC®Cinema Media Server CMS-5000 is in compliance with European Directive 2015/863/EU.

The QSC Cinema Media Server CMS-5000 is in compliance with “China RoHS” directives per GB/T26572. The following table is provided

for product use in China and its territories:

QSC CMS-5000 系列系列,

有毒有害物质或元素有毒有害物质或元素

(Toxic or hazardous Substances and Elements )

部件名称部件名称

(Part Name)

铅

(Pb)

汞

(Hg)

镉

(Cd)

六价铬

(Cr(vi))

多溴联苯

(PBB)

多溴二苯醚

(PBDE)

电路板组件电路板组件

(PCB Assemblies)

XOOOOO

机壳装配件机壳装配件

(Chassis Assemblies)

XOOOOO

本表格依据 SJ/T 11364 的规定编制。 (This table is prepared following the requirement of SJ/T 11364.)

O: 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。

O: Indicates that the concentration of the substance in all homogeneous materials of the part is below the relevant threshold speciﬁed in

GB/T 26572.

X: 表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限量要求。

X: Indicates that the concentration of the substance in at least one of all homogeneous materials of the part is above the relevant

threshold speciﬁed in GB/T 26572.

（目前由于技术或经济的原因暂时无法实现替代或减量化) (Replacement and reduction of content cannot be achieved currently

because of the technical or economic reason.)

Warranty and Registration

For a copy of the QSC Limited Warranty, visit the QSC website at www.qsc.com

To register your product:

1. Go to the QSC website www.qsc.com and search for "registration".

2. Click Product Registration (Cinema).

3. Complete the registration form.

TD-001576-01-A

Contents

Explanation Of Terms And Symbols ............................................ii

Important Safety Instructions ................................................ii

Maintenance and Repair .............................................................. ii

Lithium Battery Warning .............................................................iii

Regulatory Information .....................................................iii

FCC Statement ......................................................................iii

DCI/FIPS Security Compliance ........................................................iii

Product End of Life Information .......................................................iii

RoHS Statement ....................................................................iv

Warranty and Registration ..................................................iv

Package Contents ...........................................................1

Introduction ................................................................1

Front Panel Features................................................................. 1

Installation ................................................................ 2

Required Tools.......................................................................2

Installing the CMS-5000 into a Projector ..............................................3

Power-up ..........................................................................4

Projector Marriage with CMS-5000 ......................................... 4

Barco ..............................................................................4

NEC ................................................................................4

Christie.............................................................................4

Setup ..................................................................... 5

CMS-5000 User Interface (UI) Software ...............................................5

Accessing CMS UI Through Projector Connection.....................................5

Accessing CMS UI Through Q-SYS Designer..........................................5

Browser Security Warnings ........................................................5

Default IP Addresses .................................................................5

Logging In...........................................................................6

Navigation Buttons ..................................................................6

Server Setup........................................................................ 7

Server Settings................................................................... 7

Updating the CMS-5000 Software ................................................. 7

TD-001576-01-A

CMS-5000 System Licenses ....................................................... 7

Adding or Modifying User Credentials ...............................................8

Network and FTP Server Settings .....................................................8

Network Conﬁguration Recommendations ...........................................8

General Recommendations............................................................. 8

CMS-5000 Control .................................................................. 8

Automation TCP/IP Connection ........................................................ 9

Data Transfer (FTP) ................................................................... 9

Q-LAN Network ...................................................................... 9

High Speed Ethernet SFP Requirements .............................................9

SNMP ...........................................................................9

Projector/Video Settings.............................................................9

Audio Settings .....................................................................10

Video Alignment Delay ............................................................10

Q-LAN Audio Output Enable .......................................................10

AES Channel Assignments ........................................................10

Q-SYS Channel Assignments ...................................................... 11

DTS:X Settings .................................................................. 11

DTS:X VBAP Generator ........................................................... 11

Automation Settings................................................................12

Activating and Creating Devices ...................................................12

Editing and Testing Cues ..........................................................13

Cue Bundles .....................................................................13

Conﬁguration Import/Export.........................................................13

Restoring the Default Conﬁguration ...............................................14

Q-SYS Setup .......................................................................14

Operation ................................................................ 14

CMS Operational Status.............................................................14

Overview page ...................................................................14

Status Bar ......................................................................14

Front Panel LEDs.................................................................15

Content Storage ...................................................................15

Viewing Available Content ........................................................15

Content Status ..................................................................15

Ingesting Content ................................................................16

Drive Ingest ......................................................................... 16

FTP Ingest .......................................................................... 16

vii

TD-001576-01-A

Building Playlists ...................................................................16

Creating Schedules .................................................................16

Playing Content ....................................................................16

Manual Modes ...................................................................16

Schedule Mode ..................................................................16

TMS Control.....................................................................16

Q-SYS ..........................................................................16

Troubleshooting Guide.............................................17

Accessing Logs............................................................ 17

Conﬁguration Backup and Restore .......................................... 17

Restoring Factory Default Conﬁgurations .................................... 17

Check Connections ........................................................ 17

Connect via Projector to Check Settings..................................... 17

Rebooting the CMS ........................................................ 18

LED Modes ............................................................... 18

Force Boot to Factory Image................................................ 18

Reseat Board ............................................................. 19

References ............................................................... 19

Quick Start Guide (TD-001577) ......................................................19

Security Guide (TD-001589) .........................................................19

Application Programmer's Interface (TD-001592) .....................................19

Speciﬁcations.............................................................20

General ............................................................................20

Front Panel Controls and Indicators ..................................................20

TD-001576-01-A

Package Contents

CMS-5000

With selected Storage Option

and Front Panel Option

LABEL,

ANTI-TAMPER

LB-004118

CMS-5000 Security Guide

TD-001589

CMS-5000 Quick Start Guide

TD-001577

QSC Warranty TD-000453

Introduction

The innovative CMS-5000 Cinema Media Server supports JPEG-2000 decoding of high frame rate 4K and 2K images with advanced

solid state storage. In addition to an eSATA port and 1G Ethernet ports, the CMS-5000 includes two USB 3.0 ports and a 10G Ethernet

port to enable accelerated content ingest. The CMS-5000 supports immersive audio formats with rendering of up to 64 channels

(DTS:X™) and can be directly interfaced with Q-SYS™, the QSC network platform for integrated sound, picture, and control.

Front Panel Features

NOTE:NOTE:Figure 1 does not show the mounting hole options in order to emphasize the connectors section

NOTE:NOTE:At power up, the POWER LED is on and the READY LED is off. During CMS initialization, all the LEDs except POWER will

blink. Once the READY light is on and no longer blinking, LEDs function as described below. Additional information about LED

status during bootup and test is available in the Troubleshooting Guide.

1. DRIVE STATUS 1-4 LEDs – Blue indicates activity on the installed SSD drives.

2. INGEST LED – Blue indicates DCP scan or ingest active from an eSATA drive.

3. eSATA – Used for ingest of DCP to onboard storage directly from a hard drive.

4. ETH A and ETH B

(CONTROL/DATA) – Use these RJ45s to connect to a 10/100 or 1G Ethernet network to enable control and

monitoring functions. Use the Ethernet network to connect the

CMS-5000

to the following:

• TMS

• Library server

• Closed-captioning transmitter

• Cinema processor (automation control)

• Other Ethernet-controlled devices

— Figure 1 —

1 2 3 4 5 6 7

19 20 2111 12 13 14 15 17 189 108 16

{

TD-001576-01-A

5. AUX IN 1-4 – Four auxiliary AES digital inputs are provided for alternate content audio.

6. AES CH 1-8 and AES CH 9-16 – In non-Q-SYS installations, these digital outputs include the main 5.1/7.1 channels

(L,C,R,LS,RS,BL,BR and Lfe (Sub)), the HI and VI tracks, and may include up to 6 additional surround channels for immersive audio

bitstreams. These outputs are connected to the cinema processor (e.g. DPM or JSD) for additional EQ and speaker processing. Routing of

channels to these outputs as well as the Aux Out is conﬁgurable in the UI.

7. Model and Serial Number – Use the Serial Number when requesting content keys for the

CMS-5000

8. RESET button – Pressing the reset button will cause the

CMS-5000

to reboot immediately.

9. TAMPER LED

• Flashing Red – Indicates the projector service door is open.

• Solid Red – Indicates a tamper event or non-recoverable error. The

CMS-5000

is non-functional and will need to be returned to

QSC.

10. FLT LED – Yellow indicates an error occurred during self-test. See the Troubleshooting Guide for more information.

11. PWR LED – Green indicates presence of 12V on rear connector to projector

12. RDY LED

• Flashing Green - Indicates the CMS is booting up or awaiting marriage to the projector.

• Solid Green - Indicates the CMS is ready to perform its functions.

13. USB 3.0 – Both connectors support USB 3.0 and can be used for ingest.

14. ACT LED – Yellow indicates link on HS ETH, alternating yellow/green indicates activity on HS ETH.

15. LINK LED – Yellow indicates the HS ETH link is established at 5 Gbps. Green indicates HS ETH link is established at 10 Gbps.

16. HS ETH – This location has an SFP+ cage for connection to a 2.5G-10G ﬁber or Cat6 Ethernet network. This network is used primarily for

transfer of the DCP from the library server or between

CMS-5000

17. Q-SYS LAN A and LAN B – For systems that include a Q-SYS core, one or both of these ports are used to transfer audio from the CMS

to the core.

18. AUX OUT 1-8 – Eight AES digital outputs are provided. These can be used to output alternative audio tracks including HI, VI and

alternate language tracks.

19. HD-SDI A and B – These connectors provide an interface to professional video devices. These support up to 3G dual link HD SDI.

20. HDMI IN A and B – These can be connected to video sources with HDMI outputs such as Blu-ray players, satellite receivers, laptops

and STBs. These support the HDMI 2.0/HDCP 2.2 standard.

21. SYNC IN and SYNC OUT – These connectors are used to sync

CMS-5000

s in theaters where two projectors are being used for 3D

content. It is a sync output on the ‘primary’ CMS and sync input on the ‘secondary’ CMS. LED's indicate activity.

Installation

Required Tools

• ESD strap

• #1 Phillips screwdriver

TD-001576-01-A

Installing the CMS-5000 into a Projector

1. Make sure you are familiar with the projector marriage process before starting the installation of the CMS-5000. Once you start the

installation, the CMS-5000 must be married to the projector per the manufacturer’s instructions before the CMS-5000 will be functional.

2. Make sure you have the correct front panel for the installation. There are unique front panels for the Barco, NEC, and Christie projectors.

WARNING!WARNING!Turn off the projector's power before removing the access panels.

3. Follow the manufacturer’s instructions for removing the covers to allow access to the IMB slot. This may require the disconnection

of the projector Ethernet connection.

4. If the installation has an Enigma card, disconnect the HD-SDI cables and disable/remove the Enigma card from the projector.

CAUTION!CAUTION!The CMS-5000 is not “hot pluggable” so be sure power to the projector is turned off.

5. With ESD protection in place, remove the CMS-5000 from its anti-static bag and slide it into the IMB slot on the projector. Make

sure you properly seat the CMS-5000 in its slot.

6. Install front panel mounting screws. It is critical to install the CMS using all mounting hardware provided to ensure proper

operation. Improper installation can result in video anomalies or other operational issues.

a. For Barco projectors, install the two 6 mm mounting screws, one on each side of the front panel, to secure the CMS-5000 in

its slot. (See Figure 2) Failure to install the mounting screws may allow the CMS-5000 to slip out of its slot and fail.

b. For NEC projectors, the

CMS-5000

is equipped with two captive screws in the front panel (See Figure 3). Use these screws to

secure the

CMS-5000

. Failure to install the mounting screws may allow the

CMS-5000

to slip out of its slot and fail.

c. For Christie projectors, no mounting screws are required.

— Figure 2 —

Barco

— Figure 3 —

NEC

— Figure 4 —Christie

Autres manuels pour CMS-5000

Table des matières

Autres manuels QSC Serveur

QSC

QSC CMS-5000 Manuel utilisateur

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur