QPS Que! Manuel utilisateur

QPS TECHNICAL SUPPORT

Our Customer Support staff are ready to assist you with any problem you may have with

your QPS Product.

There are many ways to contact QPS Technical Support.

E-Mail: [email protected]

World Wide Web: http://www.qps-inc.com

Technical Support: (714) 692-3588

Technical FAX: (714) 692-5516

publication may be reproduced or transmitted in any form by any means for any purpose

without the prior written permission of QPS Inc.

Windows is a trademark of Microsoft Corporation.

Apple, Mac OS are trademarks of Apple Computer Inc.

All other brand and product names are trademarks or

registered trademarks of their respective owners.

Replicating copyrighted material without the permission of the publisher may be unlawful.

QPS does not condone, support, orencouragethe violation of copyright laws. Please obtain

proper authorization prior to replicating copyright protected material.

Note: Please refer to Que!Super Disk 240 Installation ManualCD for complete installation version.

TECHNICAL SUPPORT

CONGRATULATIONS

THANK YOU

for Choosing QPS!

Congratulations on your purchase of the Que! Super

Disk 240 Drive. In this manual, you’ll findinformation

designed to help you understand the capability of

your new drive as well as a step-by-step explanation

of how to install your hardware and software.

GETTING STARTED

WHAT YOU SHOULD HAVE!

• What’s in the Package

Refer to the provided package list on the following page and verify that you have received

all of the appropriate parts.

Okay, if all the right parts were in the package, then you just need to make sure your

system will support the Que! SuperDisk 240 Drive. Here's what you'll need.

Minimum System Requirements for PC

•Computer IBM PC-AT or Compatible, with onboard USB port, 64MB, Pentium class CPU

with MMX.

• MS Windows 98/ 98SE/ 2000/ Me operating system

Minimum System Requirements for Mac

•iMac/ ibook/ PowerBook G3/ Power Mac G3/ Power Mac G4/ Power Mac G4 Cube

•Mac OS 8.6, 9, X operating system

WHAT ABOUT SOFTWARE?

The Que! SuperDisk 240 Drive comes with a variety of software applications that will help

you get the most from your drive.

Users should install the following applications:

•SuperWriter 32 for PC/ Mac

•Dantz Retrospect Express for PC/ Mac

• Que! D2D (Windows Only)

Note: Please refer to Que!Super Disk 240Installation Manual CD for complete installation version.

PACKAGE LIST

Drive

USB Extension

Cable

Software Disc Media

Installation

Manual

FRONT VIEW

1. Disk Slot

Insert a disk. (See Section 4.1)

2. Busy Indicator

Lights while a command from host is executed. (including read/ write operations)

3. Eject Button

Ejects a disk. For Mac you need to drag the Mounted Disk Icon to the trash

to eject the disk

4. Emergency Eject Hole

Insert an instrument such as straightened paper clip pin into this hole to manually

eject a disk. (See the lower part in Section 4.1)

Note: Please refer to Que! Super Disk 240 Installation Manual CD for complete installation version.

PARTS AND FUNCTIONS

REAR VIEW

1.USB Interface cable

Connects the end of the cable to host computer’s

USB interface port.

2. Expansion Connector

This is for future use and is not to be used at

this time.

CONNECTING VIEW

Note: You can connect the SuperDisk drive whilethe

host computer power is on (Hot-Plug).When hot-plugging,

the host PC automatically recognizes the SuperDisk device

if the SuperDisk device driver is already installed into the PC.

The AC Adapter for this SuperDisk must be satisfied the

below requirements.

1.The AC adapter has been certified to conform to the

requirements of the relevant regulations.

2. The AC adapter output is supplied through SELV

(Safety Extra Low Voltage) circuit and Limited

Current circuit.

3. The AC adapter output voltage and current value

are the prescribed one.

PARTS AND FUNCTIONS

To USB or Connecting Port

Rear side of the drive unit

USB Interface Cable

INSTALLATIONS

To Start Operation on Drive.

1. Turn on the power supply of the Host PC.

2. Plug the USB interface cable of the SuperDisk

drive to Host PC USB port. (Refer the previous page)

3. Insert a disk into the disk slot with the disk’s label

facing up and the shutter side heading as shown in

the below figure.

CAUTION:

•Do not insert any foreign objects into the disk slot. This could result in a malfunction.

•Do not press down hard on a disk when inserting the disk, because this may cause

damages or malfunction to the disk and/or the drive unit.

• In case of emergency, eject the disk manually If for some reason the disk does not eject

automatically, press the eject-bar (for example, insert a straightened paper clip pin with

minimum straight length = 15 mm, diameter = 0.5 ~ 0.8 mm) into the

emergency eject hole to eject the disk. (Before proceeding with this

emergency step, make sure that the power is switched OFF.)

Note: Please refer to Que! Super Disk 240 Installation Manual CD for complete installation version.

GUIDE TO OPERATION

SUMMARY OF FEATURES

1. High data storage capacity (with SuperDisk diskette)

2. Full read/write compatibility with the standard 2DD/ 2HD (720 KB/ 1.44 MB)

3. Embedded USB interface cable (Power supply capability)

4. Slim stand alone design

5. 32MB standard FD (2HD 1.44MB diskette) formatting function

SYSTEM SET UP

The USB technology devices are fully hot-pluggable to the USB-enabled computer. The

SuperDisk drive with USB interface is able to be attached to host computer and used

without turning off or rebooting the computer.

POWER SAVING (STANDBY MODE)

1. When the drive waits for a command from the Host for more than four seconds, then

the drive enters Power Save Mode. Laser and Spindle motor stop.

2. Restart is automatic when the Host Command is acknowledged.

Note: Please refer to Que!Super Disk 240 Installation Manual CD for complete installation version. 7

GENERAL DESCRIPTION

INSTALLATION OF THE SUPERDISK DEVICE DRIVER FOR WINDOWS 98

This Device Driver software must be installed into your host computer before operating

the SuperDisk drive.

1. Turn on the personal computer and start Windows 98.

2. Set the SuperDisk driver disc in your CD-ROM drive.

3. Open the Run… window from the Start menu.

4. Type "A:\SETUP.EXE" and press OK. (assumes that your drive is designated "A")

5. Follow the procedures displayed on the screen to install SuperDisk Device Driver.

INSTALLATION OF THE SUPERDISK DEVICE DRIVER FOR MAC OS

This Device Driver software must be installed into your host computer before operating

the SuperDisk drive.

1. Turn on your Macintosh computer.

2. Set the SuperDisk driver disc in your CD-ROM drive.

3. Double-click the "SuperDisk Installer CD" icon displayed on desktop.

4. Double-click the "SuperDisk Installer" icon in the opened "SuperDisk Installer CD”.

5. Follow the procedures displayed on the screen to install SuperDisk Device Driver.

Note : The 32MB FD writing software "SuperWriter32” is installed along with the above

installation. Once you have formatted a 1.44MB floppy diskette as 32MB with the

"SuperWriter32" software, it may be read and accessed only with a LS240 SuperDisk

drive that is connected to a system that has the "SuperWriter32" software installed on it.

Note: Please refer to Que! Super Disk 240 Installation Manual CD for complete installation version.

WINDOWS/MAC INSTALLATION

Autres manuels pour Que!

Table des matières

Autres manuels QPS Lecteur de disquettes

QPS

QPS Que! Manuel utilisateur

QPS

QPS Que! Manuel utilisateur

Manuels Lecteur de disquettes populaires d'autres marques

Commodore

Commodore 2031 Manuel utilisateur

Epson

Epson SMD-100 series Manuel utilisateur

Teac

Teac FD-235 Series Manuel utilisateur

Bering

Bering OptiPac 2652MD Manuel utilisateur

EI-EN Enterprise

EI-EN Enterprise Super 5 Manuel utilisateur

Commodore

Commodore 1581 Manuel utilisateur

Teac

Teac FD-05PUB Manuel utilisateur

Atari

Atari XF551 Manuel utilisateur

Shugart

Shugart SA410 Manuel utilisateur

Panasonic

Panasonic CF-VFDU03U - 1.44 MB Floppy Disk Drive Manuel utilisateur

Cipher Data Products

Cipher Data Products FloppyTape 525 Series Caractéristiques techniques

Iomega

Iomega Zip 250 Instructions d'utilisation

Commodore

Commodore 8050 Manuel utilisateur

Panasonic

Panasonic CF-VFDU03W Manuel utilisateur

Teac

Teac FD-55 Series Manuel utilisateur

CORVUS

CORVUS H-Series Manuel utilisateur

Commodore

Commodore vic-1540 Manuel utilisateur

Commodore

Commodore 8050 Manuel utilisateur