QPS Que! USB 2/1.1 Instructions d'utilisation
QPS TECHNICAL SUPPORT
Our Customer Support staff are ready to assist you with any problem you may have with
your QPS Product.
There are many ways to contact QPS Technical Support.
E-Mail: [email protected]
World Wide Web: http://www.qps-inc.com
Technical Support: (714) 692-3588
Technical FAX: (714) 692-5516
COPYRIGHT STATEMENT
Copyright © 1998-2001 QPS Professional Solutions. All rights reserved. No part of this
publication may be reproduced or transmitted in any form by any means for any purpose
without the prior written permission of QPS Inc.
Windows is a trademark of Microsoft Corporation.
All other brand and product names are trademarks or
registered trademarks of their respective owners.
COPYRIGHT PROTECTION NOTICE
Replicating copyrighted material without the permission of the publisher may be unlawful.
QPS does not condone, support, or encourage the violation of copyright laws. Please obtain
proper authorization prior to replicating copyright protected material.
Note: Please refer to the Que! USB 2 / 1.1 Installation Manual, located on your Installation disc.
TECHNICAL SUPPORT
1
CONGRATULATIONS
CONGRATULATIONS!
Thank you for Choosing QPS!
In this manual, you’ll find information designed to
help you understand the capability of your new Que!
USB 2 / 1.1 CD-RW drive as well as a step-by-step
explanation of how to install your hardware and
software.
2
PACKAGE LIST
WHAT YOU SHOULD HAVE!
What’s in the Package
Refer to the provided package list on the following page and verify that you have received all
of the appropriate parts.Okay, if all the right parts werein the package, then you just needto
make sureyour system will support the Que! USB 2/1.1 CD-RW Drive. Here's what you'll need:
System Requirements
USB 2.0 Performance
•333 MHz processor or better
• MS Windows 2000
•Built in or add on USB 2.0 ports
• 128MB of RAM
• CD-ROM drive
•70MB available hard drive space for software
USB 1.1 Performance
• 266MHz processor or better
• MS Windows 98SE or later
•Built-in or add on USB 1.1 ports
• 64MB of RAM
• CD-ROM drive
•70MB available hard drive space for software
Note: If there is not an USB 2.0 port in your computer, you will need a separate USB 2.0
Controller Card (not included) to connect your Que! USB 2 / 1.1 CD-RW Drive.
3
PACKAGE LIST
Drive
Universal Power
Supply Adapter
Power Cable
USB Cable
Software
CD-R & CD-RW
Media
Installation
Manual
Carrying Bag
& Strap
GETTING STARTED!
Before you start using your Que! USB 2/1.1 CD-RW Drive, you’ll want to make sure you have
everythingyou need. Inthis chapter, we’ll tell you what comes in the package, soyou can make
sure it’s all there. As well, in thischapter we’ll tell you about the minimum requirementsyour
system needs to support the Que!USB 2 / 1.1 CD-RW Drive.
What You Should Have!
Refertotheprovided package liston page3 and verifythat you have received all of theappropriate
parts. If all the right parts are in the package, then you just need to make sure your system will
support the Que! USB 2/ 1.1 CD-RW Drive.
Note: Please refer to Que! M3 Installation Manual CD for complete installation version.
4
GETTING STARTED
5
INSTALLATION
Verify that your systems is equipped with a high speed USB 2.0 interface. If your systems
is equipped with a standard USB 1.1 interface only, you need to add a USB 2.0 interface
to your system to guarantee the high speed rating performance of the QUE! USB 2/1.1
CD-RW drive on your system.
Step 1. Turn off the power on your
PC and all other peripherals
that are attached to your
system.
Step 2. Connect the USB cable
to the USB port on the
back of your PC.
Note: Please refer to the Que! USB 2 / 1.1 Installation Manual,
located on your Installation disc.
6
INSTALLATION
Step 3. Attach the other end of the USB interface cable to the USB port on the back of
the Que! USB 2/1.1 Drive.
Step 4. Attach the power adapter to the back
of the Que! USB 2/1.1 Drive. Plug
one end of power cable to the back
of the power adapter and the other
end to the grounded power outlet.
Step 5. Congratulations! To continue, refer
to your software installation
procedures on the following page.
Note: Please refer to the Que! USB 2 / 1.1
Installation Manual, located on your Installation disc.
USB 2 Installation
NOTE: Please be sure that your USB 2.0 Controller Card is installed correctly and
functioning properly according to the manufacturers instructions and specifications
prior to connecting the Que! USB 2 / 1.1 CD-RW drive.
Before you plug in your new Que! USB 2 / 1.1 CD-RW drive, you must run the
"TPPINST.EXE" driver file installer. This file is located in the "Drivers" folder on your install
CD that was in your kit. After installing the drivers, restart the system and plug in your
new Que! USB 2 / 1.1 CD-RW drive.
Step 1. Plug the power adapter into the wall receptacle and into the back of the drive.
Step 2. Plug the USB cable into the USB 2.0 port on the back of your USB 2.0 Controller
Card and into the port on the back of the drive.
Step 3. Let Windows 2000 detect your new Que! USB 2 / 1.1 CD-RW drive.
Step 4. Reboot your computer, this will only be necessary the first time you
install the drive.
Step 5. Verify that your new Que! USB 2 / 1.1 CD-RW drive is available for use within the
Windows operating system.
Step 6. Install the CD-Recording software that is supplied on your Install CD.
Note: Please refer to the Que! USB 2 / 1.1 Installation Manual, located on your Installation disc. 7
USB 2 INSTALLATION
USB 1.1 Installation
NOTE: Please be sure that your on-board USB 1.1 port is installed correctly and
functioning properly prior to connecting the Que! USB 2 / 1.1 CD-RW drive. Please
remember that when connecting to the on-board USB port, your Que! USB 2 / 1.1
CD-RW drive will only be capable of speeds up to 4x max.
Before you plug in your new Que! USB 2 / 1.1 CD-RW drive, you must run the
"TPPINST.EXE" driver file installer. This file is located in the "Drivers" folder on your install
CD that was in your kit. After installing the drivers, restart the system and plug in your
new Que! USB 2 / 1.1 CD-RW drive.
Step 1. Plug the power adapter into the wall receptacle and into the back of the drive.
Step 2. Plug the USB cable into the on-board USB 1.1 port on the back of your computer
system then into the port on the back of the drive.
Step 3. Let Windows detect your new Que! USB 2 / 1.1 CD-RW drive.
Step 4. Reboot your computer, this will only be necessary the first time you install
the drive.
Step 5. Verify that your new Que! USB 2 / 1.1 CD-RW drive is available for use within the
Windows operating system.
Step 6. Install the CD-Recording software that is supplied on your Install CD.
Note: Please refer to the Que! USB 2 / 1.1 Installation Manual, located on your Installation disc.
8
USB 1.1 INSTALLATION
Table des matières
Autres manuels QPS Lecteur CD/CDR
Manuels Lecteur CD/CDR populaires d'autres marques
Axis
Axis CD-ROM SERVER Manuel utilisateur
LG
LG CRD-8322B Manuel utilisateur
Memorex
Memorex 32023234 - 52x32x52x External USB2.0 CD... Instructions d'installation
Yamaha
Yamaha CD Recordable/Rewritable Drive CRW3200 Manuel utilisateur
Sony
Sony CRX230AE Manuel utilisateur
Sony
Sony CRX - 160E Manuel utilisateur
