Qlogic QLE3142-SR-CK Manuel utilisateur
[Quick Start Guide ]
QUICK START GUIDE
z
INTELLIGENT ETHERNET ADAPTERS INSTALLATION
Purchasers of OEM products should consult with the OEM for support.
Please feel free to contact your QLogic approved reseller or QLogic
Technical Support at any phase of integration for assistance. QLogic
Technical Support can be reached by the following methods:
Web http://support.qlogic.com
E-mail [email protected]
The QLogic knowledge database contains troubleshooting information
for the QLogic adapters. Access the data base from the QLogic Support
Web page, http://support.qlogic.com. Use the Support Center search
engine to look for specific troubleshooting information.
3
Quick Start Guide
Overview
This document provides general information about QLogic’s 1-Gigabit Quad Port and 10-Gigabit Dual Port Ethernet
adapter products.
Package Contents
Depending on the product ordered, this package contains one of the following boards:
❑QLE3044-RJ-CK Quad Port 1GbE adapter (copper RJ45)
❑QLE3142-CU-CK Dual Port SFP+ 10GbE adapter (twinax)
❑QLE3142-SR-CK Dual Port SFP+ 10GbE adapter (multi-mode fiber)
❑QLE3142-LR-CK Dual Port SFP+ 10GbE adapter (single-mode fiber)
Handling and Safety
The adapter card contains sensitive electronic components that are susceptible to Electro-Static Discharge (ESD) and
must be handled with care. The following steps can be taken to ensure proper operation of the product:
❑When transporting the product, it should be kept in an anti-static bag to protect against ESD.
❑When inserting or removing the product from the system chassis, the operator should be properly grounded.
❑Devices on the product can generate high temperatures during normal operation. Use caution when handling
the product.
❑For the QLE3142-SR-CK and QLE3142-LR-CK optical products:
❑Use the dust plugs (provided) to keep the high speed optical fiber connectors free from dust and debris
when not in use.
❑Do not use excessive force when connecting or disconnecting the fiber optic cable.
❑When routing the fiber optic cable in the system, never exceed a minimum bend radius of 3”.
WARNING!! Note that the light emitted by the optical laser is outside the visible spectrum. Looking directly into either
the optical cable or the optical port can cause serious eye damage.
4
Product and Software Installation
For information on installation and configuration, visit
http://driverdownloads.qlogic.com/QLogicDriverDownloads_UI/default.aspx to download the following:
❑Software
❑Driver
❑Firmware
❑Diagnostics and Utilities
❑Documentation
❑Release Notes
❑Readme
❑User’s Guide
Getting Help
Thedocumentationlistintheprevioussection provides all of the informationrequiredtosuccessfullyinstallandconfigure
the QLogic Ethernet adapter. If further assistance is required, visit http://support.qlogic.com for product support.
Cable Specifications (Cable not included)
Table 1. QLE3142-SR-CK/QLE3142-LR-CK
Parameter
QLE3142-SR-CK QLE3142-LR-CK
Unit50m62.5m 9m10m
Wavelength 850 850 1310 1310 nm
Bandwidth (min) 400 160 N/A N/A MHz
Operating Range (max) 300 33 10K 10K m
Table 2. QLE3044-RJ-CK/QLE3142-CU-CK
Product Cable Network Type Cable Length
QLE3044-RJ-CK Cat5 LAN 100 meters
QLE3142-CU-CK Copper direct attach twinax LAN 7 meters (10 meters on
qualified cables)
5
Optical Fiber Specifications
Table 3. QLE3142-SR-CK Multi-Mode Fiber (MMF) Type
MMF Optical Fiber Core
Diameter Wavelength (nm) Bandwidth (MHz) Distance (meters)
50m850 400 66
850 500 82
850 2000 300
1310 400 100
1310 500 220
62.5m850 160 26
850 200 33
1310 500 220
6
Certifications
The QLogic Ethernet adapter conforms to the following agency specifications:
❑FCC (US)
❑ICES (Canada)
❑CISPR 22/EN55022 CE (European Union)
❑VCCI (Japan)
❑BSMI (Taiwan)
❑KCC (Korea)
❑C-Tick (Australia/New Zealand)
❑QLogic Ethernet adapter products are RoHS compliant (Lead materials banned by the RoHS directive are either below applicable
thresholds as proposed by the EU, or a pending exemption applies.)
Warranty
Please check the QLogic Web site at http://www.qlogic.com/Support/Pages/warranty.aspx for warranty details.
Laser Safety
FDA Notice
This product complies with DHHS Rules 21CFR Chapter I, Subchapter J. This product has been designed and manufactured according to
IEC60825-1 on the safety label of laser product.
Class 1 Laser Product Caution—Class 1 laser radiation when open
Appareil laser de classe 1 Do not view directly with optical instruments
Produkt der Laser Klasse 1
Luokan 1 Laserlaite Attention—Radiation laser de classe 1
Ne pas regarder directement avec des instruments optiques
Vorsicht—Laserstrahlung der Klasse 1 bei geöffneter Abdeckung
Direktes Ansehen mit optischen Instrumenten vermeiden
Varoitus—Luokan 1 lasersäteilyä, kun laite on auki
Älä katso suoraan laitteeseen käyttämällä optisia instrumenttej
CLASS I LASER
© 2008–2009 QLogic Corporation. QLogic, the QLogic logo, and FlexLOM are trademarks or registered trademarks of
QLogic Corporation. All other brands and product names are trademarks or registered trademarks of their respective
owners. Information supplied by QLogic is believed to be accurate and reliable. QLogic Corporation assumes no
responsibility for any errors in this brochure. QLogic Corporation reserves the right, without notice, to makes changes
in product design or specifications.
*NE0154501-00 B*
NE0154501-00 B
Corporate Headquarters Europe Headquarters
QLogic Corporation QLogic (UK) LTD.
26650 Aliso Viejo Parkway Quatro House, Lyon Way, Frimley
Aliso Viejo, CA 92656 Camberley Surrey, GU16 7ER UK
949.389.6000 www.qlogic.com +44 (0) 1276 804 670
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels Qlogic Adaptateur
Qlogic
Qlogic SANblade QLA4050 Manuel utilisateur
Qlogic
Qlogic SANblade QEM2462 Manuel utilisateur
Qlogic
Qlogic QLE2560 Manuel
Qlogic
Qlogic QLE8042 Manuel utilisateur
Qlogic
Qlogic SANblade 2300 Series Manuel utilisateur
Qlogic
Qlogic SANblade QEM2462 Manuel
Qlogic
Qlogic QME8262-k Manuel utilisateur
Qlogic
Qlogic SilverStorm 9080 Manuel
Qlogic
Qlogic SANsurfer FC/CNA HBA CLI Manuel utilisateur
Qlogic
Qlogic 3400 Series Manuel utilisateur
Qlogic
Qlogic SANblade QLA4050 Manuel utilisateur
Qlogic
Qlogic SANblade QLA2342 Manuel utilisateur
Qlogic
Qlogic QLE2460 Manuel utilisateur
Qlogic
Qlogic 7104-HCA-LPX1P Manuel utilisateur
Qlogic
Qlogic QLA200 HBA Manuel utilisateur
Qlogic
Qlogic InfiniPath QLE7140 Manuel utilisateur
Qlogic
Qlogic 3400 Series Manuel utilisateur
Qlogic
Qlogic INFINIBAND Manuel utilisateur
Qlogic
Qlogic QLA12160 Manuel
Qlogic
Qlogic QLE3044 Manuel utilisateur
