Qlight Q100L Manuel utilisateur

Q100L/Q100LP/Q100LW

Thank you for purchasing QLight products. Please read this manual

carefully before installing this product for safe and long use.

▪Having long life of light source by adopting high-brightness LED

and suitable for machines having lots of vibration and impact with

high durability.

▪Excellent in diffusing effect by employing our own unique direct-

diffusion system.

▪Possible to select suitable operation by using built-in

steady/flashing selection switch according to the purpose of use.

▪Possible to install various way according to installing condition.

Q100LW: Wall mounting type, Q100LP: Pole mounting type

▪Material : Lens-PC, Body-ABS, PIPE-AL, BRACKET-ABS

▪Flashes(when flashing) : 60~80/min.

▪BUZZER : 80±3dB at 1M (it is optional item)

▪Protection : IP65

Model

Voltage

Current

Weight

Flashes

Color

Q100L

DC12V

0.235A

0.20Kg

60~80/min.

Red-R

Amber-A

Green-G

Blue-B

DC24V

0.130A

0.20Kg

AC110V

0.062A

0.22Kg

AC220V

0.042A

0.22Kg

Q100L

Q100LW

Q100LP

Power line UL1015-NO.18 (0.75sq) x 2C 400mm comes out from the

product.

▪In case of product using AC voltage, connect the line without

Polarity(wire color).

▪In case of product using DC voltage, black line is negative(-).

▪If possible, please mount as the direction of vertical and at the

place where low vibration and low impact.

▪Please make a suitable hole on the place where the product will

be mounted by a Drill by referring to dimension on the below

drawing.

▪In case of direction mounting type, fix the product by using

Nuts(M4-3EA) attached on mounting bolt on the bottom of the

product.

▪In case of pole mounting type, mount it by using nuts attached

on the Pole.

▪Mount it by using mounting bolts M8-2EA for L-type bracket and

mount it by using another mounting bolts M5-4EA for Wall

mounting type and round type bracket.

OPERATING MANUAL

LED Steady/Flashing Light

■Direct mounting type

Q100L Series

PCD 60, Ø5x3

▪fix the product by using Nuts(M4-3EA) attached on mounting bolt

on the bottom of the product.

■Wall mounting type

Q100LW Series

PCD 55, Ø6x4

■POLE mounting type

Division

Q100LP Series

Standard

SCREW & NUT 18mm

L-type bracket

LB24

Wall bracket

LW24

Round Bracket

SZ24

Folding round Bracket

SL24

■POLE mounting type detailed specification

In case of pole mounting method, there are mainly 5 types

according to purpose or condition of mounted place. And

please mount it according to the kinds of mounting bracket by

refer to below contents.

Model

Dimension

24mm

SCREW & NUT

(Standard types)

LB24

LW24

SZ24

SL24

There is built-in Switch to select Steady/Flashing operation on the

assembling circuit board for convenience of user. Refer to the

following drawing and explanation for right operation.

1) Lens Removal

Remove lens by turning it counterclockwise and make sure

related parts on the assembling board.

2) Selecting Steady/Flashing Type

Choose steady light or flashing light by using Steady/Flashing

Selecting switch(1)- SELECTOR(1). “L” mode of the switch is for steady

type and “LF” mode is for flashing type.

3) Lens Assembling

Assemble the product in reverse order of separating.

▪If using voltage is seriously higher or lower than rated voltage, it

can reduce the self-life of the product or can cause a problem on

Selecting Steady/Flashing Type

product operating. Make sure the using voltage does not exceed +/-

5% of the rated voltage.

▪If lens or body of the product is contaminated by chemicals such as

thinner, benzene, the product can be damaged, discolored or

deformed. Please be careful.

▪Do not give strong impact to the product. It can be a reason of wire

disconnection or short circuit.

▪Do not strongly pull the wire out from the product. It can cause a

disorder.

Situation

Main reason

Solution

Non- Lighting Partly

LED is partly damaged,

supplying higher voltage

then rated voltage.

Making Sure Using

Voltage

Feeble Lighting

Supplying Voltage Lower

Than Rated Voltage

Making Sure Using

Voltage

Lighting but

Non-Flashing

Wrong Operating L/LF

Selection Switch

Convert L/LF Selection

Switch

Problem L/LF Selection

Switch

Contact QLight or Their

Agent

Neither Lighting nor

Flashing

Wrong Wiring

Making Sure Wiring

No Power Supply

Making Sure Power Supply

QLIGHT CO., LTD.

http://www.qlightkr.com

E-mail: [email protected]

Overseas Sales Team /Plant

Tel) +82-55-328-4082 Fax) +82-55-328-3884

185-25 Mukbang-ro, Sangdong-myeon, Gimhae-si,

Gyeongsangnam-do, 621-816, KOREA

Ce manuel convient aux modèles suivants

Autres manuels Qlight Système de sécurité

Qlight

Qlight S100R Manuel utilisateur

Qlight

Qlight SM30 Manuel utilisateur

Qlight

Qlight QWT Manuel utilisateur

Qlight

Qlight SBE130 Manuel utilisateur

Qlight

Qlight ETAR50MCL Series Manuel utilisateur

Qlight

Qlight S100D Series Manuel utilisateur

Qlight

Qlight ETA50MCL Series Manuel utilisateur

Qlight

Qlight S150RS Manuel utilisateur

Qlight

Qlight STDL Manuel utilisateur

Qlight

Qlight SAB130 Manuel utilisateur

Qlight

Qlight SEDLR Manuel utilisateur

Qlight

Qlight EMCL50A Manuel utilisateur

Qlight

Qlight S125D Series Manuel utilisateur

Qlight

Qlight QWT Series Manuel utilisateur

Qlight

Qlight ET50MCL Series Manuel utilisateur

Qlight

Qlight QMPS-N Manuel utilisateur

Qlight

Qlight EMCL70 Manuel utilisateur

Qlight

Qlight QMPS Manuel utilisateur

Qlight

Qlight S100D Manuel utilisateur

Qlight

Qlight QMPS Manuel utilisateur

Qlight

Qlight QWCD50 Manuel utilisateur

Qlight

Qlight QWCD35 Manuel utilisateur

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur