Qlight SN-1 Manuel utilisateur
5025
55
100
HORN
1
Small Size Electric Horn
SN-1
SN-1
-
12
[Model number] [Voltage]
|
|
• SN-1
• 12 - DC12V
• 24 - DC24V
Please scan the QR code
for more
detailed product information.
www.qlight.com
Product SpecicationsOrdering Specications
Precautions for Safety
Failure to follow the instructions below may cause a loss of life or serious physical injury.
1. Please remove any objects that can interrupt ventilation around the product.
2. Please turn o-• the power of the product immediately if it fails to operate properly.
3. Carefully wire the product according to each product’s speci¿cation.
4. Please be careful in preventing chemicals such as thinner, benzene, etc. in contact with the surface of the product.
5. Do not apply excessive force/impact to the product.
6. Failure to follow any of the instructions above may cause malfunction or damage to the product, ¿re, and electric shock.
Precautions for Correct Use
Failure to follow the proper instructions may cause damage to property, the product, or malfunction of the product
that would void the warranty.
1. During wiring or maintenance, please completely turn o-• the power of the product. (Failure to follow this may lead to an electric shock.)
2. Do not install the product in locations that subjects it to excessive dust or water other than the conditions designated by the IP protection
ratings indicated for each product. (Failure to follow these instructions may cause a ¿re to the product, electric shock, physical injury,
malfunction or damage to the product.)
3. Do not alter or repair this product. If maintenance or repair service is required, please contact your local Qlight contact point. (Failure to
follow these instructions may lead to ¿re, electric shock, or product damage.)
4. Please apply the correct voltage to the product. (Failure to follow these instructions may lead to ¿re, electric shock, or product damage.)
5. When the product is applied to a condition that may impact lives or property, please make sure to have a double safety device. (Failure to
follow this may cause damage to property, ¿re, electric shock and loss of life.)
Thank you for purchasing Qlight’s products. Please read this user manual carefully
prior to installation and operation to ensure safe and correct use.
Model
number
Voltage Current
Sound pattern and volume
Certi¿cate
Weight
SN-1
DC12V
0.170A
• WS-1 Warning Sounds
: Max.100dB
-0.88kg
DC24V
0.220A
• Protection rating : IP55
• Ambient operating temperature : -25°C to +50°C
2
SN-1
SN-1
Ø133
Ø10 CABLE ENTRY
4-Ø5 HOLES
141
5
8
104.5
64
48
72
88
71
•
First, machine taps or holes on the mounting surface .
•
The mounting hole of this product is
5
mm in diameter.
•
When machining taps, fasten the bolt through the mounting hole
of the product.
•
When machining holes, insert the bolt through the hole of the
product, and tighten the nut from the opposite side of the mounting
surface
• When assembling using bolt and nut, please make sure to use at
washer and spring washer.
• When adjusting the phase and lower angle of the mixed housing (signalling angle) after product cancellation Loosen the bracket
¿xing bolts(
①
) on the side of the product slightly to adjust the desired angle.
■ Adjusting the Angle of the Horn housing
Housing
(Steel)
Bracket(Steel)
①
Housing ring
(Steel)
Dimensions
(Units : mm)
Parts Denition/ Installation/ Adjusting the Angle of the Horn housing
■
Parts Denition
/
Installation
Wiring Instructions
• External power line -
UL1015 AWG18(0.75sq) x 2C 400m m
PowerFuse
White(W)
Black(BK)
DC
3
Installation Environment and Protection Rating
• This product is designed for use with protection rating of IP55.
• If the product is installed in locations that subject it to excessive dust or water other than the designated IP protection rating
indicated(IP55), it may cause malfunction or damage to the product.
• For further information, please visit our website (vwww.qlight.com).
Mounting Hole Specications
•
Machine holes on the mounting surface referring to the diagram below.
4-Ø6 HOLES
72
48
Precautions for installation
• In case of outdoor applications, install the product in the upright
position. Do not install the product horizontal or upside-down
positions where water can potentially penetrate into the product
and impact it’s operation.
Left directionReverse direction Right direction
[Installation]
Head O-ce | Suite #1510, STX-V Tower, 128 Gasan digital 1-ro, Geumcheon-gu, Seoul, Korea
Tel. +82-2-2679-6152(Toll free. +82-80-328-2222) Fax. +82-2-2679-6154
Factory | 185-25, Mukbang-ro, Sangdong-myeon, Gimhae-si, Gyeongsangnamdo, Korea Tel. +82-55-328-1111(Toll free. +82-80-328-1111)
Qlight OverSEAs Sales Dept |
704 Nakdong-daero, Sasang-gu, Busan, Korea(Eomgung-Dong) Tel : +82-51-620-4100
Qlight Public Relations & Marketing Team O-ce | 704 Nakdong-daero, Sasang-gu, Busan, Korea(Eomgung-Dong) Tel. +82-51-245-0017
3003 North First Street, Suite #341, San Jose, CA 95134 USA Tel. +1 - 408 - 519 - 5740 Fax. +1 - 408 - 519 - 5739
China Factory/ Shanghai Sales O-ce | #19, Nanda Road, Baoshan Area, Shanghai, China Tel. +86
-
21
-
6651
-
7100 Fax. +86
-
21
-
6315
-
3929
China Factory Site 2 (Qidong) | #33, Haiyan Road, Qidong High-tech Industrial Development Zone, Qidong, Jiangsu Province, China
Tel +86
-
513
-
8384
-
9999 Fax +86
-
513
-
8384
-
9910
Product Operation Inquiry / Customer Support +82-51-620-4100
You can expect prompt service if you have exact information such as model name, symptom, telephone number and address.
※ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Head office : Suite #1510, STX-V Tower, 128 Gasan digital 1-ro, Geumcheon-gu, Seoul, Korea ( Postal Code : 08507)
Factory : 185-25, Mukbang-Ro, Sangdong-Myeon, Gimhae-Si, Gyeongsangnam-Do, Korea ( Postal Code : 50805)
For your safety
Speci¿cation and dimensions listed in this catalogue subject to change without notice for product quality improvement.
The newest product information is available on our website.(www.qlight.com)
Please read the instruction manual attached to the product carefully before installation and use.
www.qlight.com
EN - SN-1 - 2201A
Autres manuels Qlight Corne
Qlight
Qlight SN-1 Manuel utilisateur
Qlight
Qlight QWH35 Manuel utilisateur
Qlight
Qlight SANA200 Manuel utilisateur
Qlight
Qlight SHDLR Manuel utilisateur
Qlight
Qlight QWH35T-TI Manuel utilisateur
Qlight
Qlight SEHN25 Manuel utilisateur
Qlight
Qlight QWH35T Manuel utilisateur
Qlight
Qlight SRN Manuel de l'opérateur
Manuels Corne populaires d'autres marques
Elk Products
Elk Products 45 Manuel utilisateur
Valcom
Valcom V-1050C Manuel utilisateur
Cooper Wheelock
Cooper Wheelock DB3 Series Manuel utilisateur
Altec Lansing
Altec Lansing 811B HF HORN Manuel utilisateur
RF Elements
RF Elements UltraHorn CC Series Manuel utilisateur
Edwards Signaling
Edwards Signaling 869DSTR-G1 Series Instructions de montage
