q-Tech NETQ-6000 Instructions d'utilisation et d'entretien
NETQ-6000
Quick Installation Manual
FOR ROUTER
Enterprise High Power Outdoor Wireless Access Point
NETQ-6000
PC Laptop IPAD
NETQ-6000
quick installation manual for router
1
Thank you for purchasing Enterprise High Gain wireless Router. This manual
will instruct you how to configure router, and enable you to use it in a perfect
status.After you have installed the router, you will be able to enjoy the surfing
feely.
1.1. Wireless Router Connection
Below diagram is the connection instruction
Reset: Press it for 5-10 seconds, then, the router return to its default
configuration.
Wan: Wan connectin
LAN1-LAN4: LAN Connection to connect PC by cable.
Power: for Power supply
If use router by cable, the correct connecting way is as below:
NETQ-6000
quick installation manual for router
2
1. Connect PC to one of the lan ports
2. Connect router’s Wan Port to ADSL Modem. Please do this only after you
have finished the router configuration, to avoid any installation issues. This is
very important. Please do it accordingly
3. If you already connect router to ADSL Modem, then, please firstly
disconnected it, then, reset wireless router.
1.2. configuration on PC end
Before configuring wireless router, firstly, do some configuration on the PC
who manages the router.
A. Switch on PC, click on right ‘My Network Place’, then click on right the
“local area connection”->“properties”-> “Internet protocol（TCP/IP）” and
“Properties”.
NETQ-6000
quick installation manual for router
3
B, Click “General ” ,Select “Obtain an IP address automatically” and “Obtain
DNS server address automatically”, then click OK.
NETQ-6000
quick installation manual for router
4
1.3. log in wireless router
A. Connect the configured PC to one of the four lan ports of router. Do not
connect router to any other devices. (this is to avoid any IP address chaos),
and switch on the router
B. Start PC’s Internet Explorer, and enter http：//192.168.1.1, press enter.
C. Users will see the following login page, Enter admin for the User Name
and Password, both in lower case letters. Then click the OK button or press
the Enter key.
D. Then, enter the configuration page of the router as below:
NETQ-6000
quick installation manual for router
5
『Remark』Set up the router is necessary by wired or wireless network type.
Please note the router setup page is not for internet.
1.4.Wizard Setting
Finish internet connection and wireless encryption by setting wizard to enjoy
internet on wireless router.
NETQ-6000
quick installation manual for router
6
Click and enter into“setting wizard” for below 3 steps.
2.1. Wlan Settings
Please choose any one broadband setting method of below 3
2.1.1. ADSL（PPPOE）dial-up settings
As example of China Telecom ADSL with below related details provided by
telecom operator.
Password××××××××
Please fill in user name and password provided by telecom operator as
picture.
lease keep default settings and click “next” if no any special setting request
2.1.2. Static IP internet settings
NETQ-6000
quick installation manual for router
7
As example of a telecom operator fixed IP address with below related details.
IPAddress：212.197.17.56
Subnet mask：255.255.255.0
Gateway：212.197.17.254
Main domain name server：202.96.128.68
Sub domain name server：202.96.134.133
A. Static IP user should fill in the blank column upon IP address provided by
telecom operator,as below picture.
B. Click “Next” for next settings after finish.
2.1.3.Dynamic IP address settings
No need make settings for dynamic IP user and click “nexts”
3.1. LAN Settings
NETQ-6000
quick installation manual for router
8
Here you can set up LAN IP and DHCP address upon your needs.Or click
“next” for wireless settings.
4.1. Wireless Settings
Here you can amend router SSID and make encryption
Pls write down the right SSID and security method in above picture( It is
better to choose WPAPSK with secutiry), click finish to share the network.
A. If you want to share the network by wifi after the basic setting, pls click
wireless network connection in My Network Places, right click Wireless
Network Connection and choose View Availale Wireless Networks
NETQ-6000
quick installation manual for router
9
Remarks: if you computer with build in 802.11b/g/n wireless USB adapter,
and can’t search the available network, pls contact with after-sale department
of your computer seller.
With Wireless network connection: Right-click Network Neiborhood and
choose Nature，only local connections or other connections, but no wireless
network connection in the network connection type
Without Wireless network connection: right-click "Wireless Network
Connection" select "Properties" tab, only "normal" and "Advanced", no
"Wireless Network Configuration", even if you normally connect the wireless
in other places.
B. Click "Refresh network list" on the top left, the computer will search some
wireless networks and listed on the right, select the right SSID you want to
connect, then Double-click to connect, if the router with passwords, input the
passwords, Click Connect tab to o access the Internet through wireless.
Autres manuels q-Tech Point d'accès sans fil
Manuels Point d'accès sans fil populaires d'autres marques
D-Link
D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur
Ubiquiti
Ubiquiti NanoStation NSM2 Manuel utilisateur
Cisco
Cisco Aironet 1550 Series Manuel utilisateur
Aruba
Aruba IAP-335 Manuel utilisateur
Advantek Networks
Advantek Networks AWN-AP-54MR Manuel utilisateur
IP-COM
IP-COM AP355 Manuel utilisateur
