Q-See QR4074-418 Manuel utilisateur

Quick Setup Guide

4 CH. H.264 NETWORK DVR

BUILT-IN 7” LCD MONITOR

4 COLOR CCD NIGHT VISION CAMERAS

Model QR4074-418

English and Spanish

Q-SEE QUICK SETUP GUIDE .

-4

1 | P a g e

Remote

Control

USB 2.0

Mouse

Ethernet

Cable

BNC (M) –RCA (F)

Adapter

60 Ft. Camera Cables

(4 Included)

Power Supply &

4 -Way Splitter

For Cameras

Pre-Installed

Hard Drive

4 Cameras with 3-Axis Stands

(2) QSDS0612D Cameras (6mm Lens)

(2) QSDS3612D Cameras (3.6mm Lens)

Software

User’s

Manual

Power Supply

For DVR

QR4074 4 CH DVR

with Built-in

7” LCD Display Screen

PART 1: PACKAGE CONTENTS

Q-SEE QUICK SETUP GUIDE .

-4

2 | P a g e

PART 2: INSTALLATION MADE EASY

*When selecting a surge protector, it is STRONGLY recommended to use one that is UL-1449

rated, for a clamping voltage of 330 or lower, a Joule rating of at least 400 and a response time

of 10 nanoseconds or less.

Q-SEE QUICK SETUP GUIDE .

-4

3 | P a g e

Device

Item

Number

Button Name /

Symbol

Function

LCD

POWER

On: The LCD screen is displayed in a basic activation status;

Off: The LCD screen enters into sleep mode.

Press once to display LCD main menu. Press again to exit LCD main menu.

Increase and confirm setting value

Decrease and confirm setting value

DVR

Press once to display DVR main menu. Press again to exit DVR main menu.

When pressed while the Main Menu is not displayed, the down arrow button

allows you to scroll through the video feeds transmitted from each camera

hooked up to your system.

When pressed while the Main Menu is displayed, the down arrow button

allows you to navigate the Main Menu Interface and select the icon of the

program you wish to access.

When pressed while the Main Menu is not displayed, the right arrow button

allows you to scroll through the video feeds transmitted from each camera

hooked up to your system.

When pressed while the Main Menu is displayed, the right arrow button will

allow you to navigate the Main Menu Interface and select the icon of the

program you wish to access.

ENTER

When pressed while the Main Menu is displayed, the ENTER button will allow

you to enter into the sub-menu of the program you wish to access.

REC.

When the “Red” Indicator Light Flashes, it Means the Hard Drive is Being

Read or Written to

PWR

If the “Green” Indicator Light is on, the System is Getting Power.

IR Receiver

Receives Signal from Remote Control

PART 3: DVR CONTROLS - FRONT PANEL

Q-SEE QUICK SETUP GUIDE .

-4

4 | P a g e

Choose MENU by right clicking on the mouse or by pushing the MENU

button on the DVR front panel or remote control.

The Main Menu offers the following Setup Features:

CAMERA: Setup name display, position, image view, and record quality

of each channel (cameras).

RECORD: Enable recording & audio, set resolution & quality, recording

mode and file size.

NETWORK: Setup Network access (Remote Internet Monitoring).

SEARCH: Find files for playback and backup.

DEVICES: Manage & Format hard drive and USB devices, setup alarms,

PTZ cameras, mobile phone access and motion detection.

SYSTEM: Setup time, date, password, and video mode.

1. From the Main menu, select CAMERA to setup the name display

(up to 8 characters) and position of each channel (cameras).

2. Select COLOR SETUP to adjust the image brightness, saturation,

contrast and hue settings for each channel (camera).

3. Select LIVE MODE and/or RECORING MODE to choose a preview

mode for the channel (camera.)

This System offers 3 modes for recording:

A. Manual B. Time Schedule C. Motion Detection

From the main menu, select RECORD to enter into the Record

Setup menu (shown at right).

CHANNEL: Select “ON” to enable video recording from the

respective camera. Select “OFF” to disable video recording.

RESOLUTION: D1=704x480, HD1=704x240, CIF=352x240

QUALITY: Best, Good, Normal. Using higher resolution and quality

settings results in better video quality, but takes up more space on

the hard drive. Choosing lower settings result in lower video quality,

but takes up less space on the hard drive.

PART 4: ACCESSING THE DVR MENUS

PART 5: SETTING UP CAMERAS FOR VIEWING AND RECORDING

PART 6: TO START RECORDING

Q-SEE QUICK SETUP GUIDE .

-4

5 | P a g e

AUDIO: Select ENABLE to record sound in addition to video (will have audio output in playback mode).

Select DISABLE, to turn sound recording off (no audio output in playback mode). Note: Audio cameras or a

microphone is required to record the sound

REC MODE: Sets DVR to record on Manual, Motion Detection, and Time Schedule Recording (detailed

instructions below).

PACK TIME: Choose the time length of all recorded files: 15, 30, 45, 60 min. (Max = 60 min)

MANUAL RECORDING:

From the Record Setup screen set the Rec Mode to “ALWAYS”. Your DVR will continuously record and separate

files will be created with the Pack Time intervals you selected.

TIME SCHEDULE RECORDING:

From the Record Setup screen, set the Rec Mode to “TIME SCHEDULE RECORD” and click “SCHEDULE” in

green. This will display the Schedule menu (see below image). Select the channels (cameras) that you wish to

record on a schedule. The options are: All, CH-1, CH-2, CH-3, and CH-4 respectively. The channel you select

will be highlighted in “Blue”, and the unselected channels will be “Grey. Click on the green GENERAL option

box then click on the boxes for the days and times that you want to record using this option on the timeline.

You can use the [From –To] pull-down menus and COPY button to copy settings from one day to another

day, or all days. Your DVR will record on it’s Time Schedule, and separate files with the Pack Time Interval

you selected. Click APPLY to activate your customized schedule, and then reboot the DVR.

You can also click on the DEFAULT button to use the system defaults. The system default settings are:

Hr 01:00 am-07:59 am : No recording

Hr 08:00 am-18:59 pm : General recording (Time Schedule)

Hr 19:00 pm- 00:59 am : Alarm recording (Motion Detection)

MOTION DETECTION RECORDING:

From the Record Setup screen, set the Rec Mode to “TIME SCHEDULE RECORD” and click “SCHEDULE” in

green. This will display the Schedule menu (See “SCHEDULE” picture on previous page). The options are: All,

CH-1, CH-2, CH-3, and CH-4 respectively. The channel you select will be highlighted in “Blue”, and the

unselected channels will be “Grey. Click on the red ALARM option box then click on the boxes for the days and

times that you want to record using this option on the timeline. You can use the [From –To] pull-down menus

Grid Explanation:

Red = Alarm (motion detection) recording

Green = General (time schedule) recording

Transparent = No recording

Blue = The channel and date selected.

Q-SEE QUICK SETUP GUIDE .

-4

6 | P a g e

and COPY button to copy settings from one day to another day, or all days. Your DVR will record on Motion

Detection. Click APPLY to activate your customized schedule.

Next, go to the Devices option (“MAIN MENU” image below) and select the Motion Option (“DEVICE

MANAGEMENT” image below), which will display the Motion Detect Box.

The Motion detection Menu has three sections,

including Channel Status, Sensitivity and Motion area.

STATUS: This option allows you to enable motion

detection on any channel.

SENSITIVITY: This option allows you to set the

sensitivity level of motion detection from 1 to 4, with

4 being the highest.

Next, click on the MD AREA SETUP button, which will display the

picture on the left. This option allows you to select the area you want

to be sensitive to motion. The area in red is sensitive to motion. You

can set this area by using the mouse or REV, FWD, and SEL keys on

the front panel. Once you have set the area, right click with the

mouse or push the ESC key to save the setting. After you have set all

of the cameras, click on the Apply button to save the settings.

Q-SEE QUICK SETUP GUIDE .

-4

7 | P a g e

SEARCHED PLAYBACK:

From the Main Menu select SEARCH to display the Video

Search Menu shown to the right. If you input a specific date and

click Search, you will find all the recordings for that day. When

you select an item, you will playback the recordings in 4

channel mode; or, click [File list] button to display File list

interface, where you can playback or backup the file you

selected. See File List heading below.

In the playback window you can play video Forward at 2x, 4x, and 8x speeds, Slow play at 1/2x, 1/4x, and 1/8x,

or normal play, pause and play frame by frame using the playback control bar, and adjust volume by clicking or

sliding tune control bar. When playback has finished, system will return to previous menu.

File List:

On the Video search menu mode, click File list to display the sub-menu shown in the picture above.

This option will allow you to view all of the available files by channel and type (all, normal, or alarm).

You can select a file and push the SEL button to playback the file, or use the FWD button and down button to

select the backup option and backup the recorded file you selected. You can also put a checkmark in the BAK

box at the end of multiple files if you want to backup more than one file. See section 5.2.4 Search Recordings in

the User Manual for more information on using the File List option.

PART 7: SETTING UP THE DVR TO PLAYBACK

Q-SEE QUICK SETUP GUIDE .

-4

8 | P a g e

Attach a USB flash drive or USB hard drive to the USB backup port and follow the instructions in Part 8 to go to

the File List in the Search menu.

If you want to backup a single recorded file from the file list, from the File List dialog box pictured above, select the

file you wish to back up by placing a check mark in the accompanying green box and hit the [BACKUP] button on

the right of the screen. You will then receive a pop up screen as illustrated in Picture 22 showing you the

progression of your backup. Once backup is complete, you will then receive a pop up message informing you that

you have backed up your files successfully (see picture below). Note that all files will be in an H264 format that

can be converted to AVI using the Multi Player program that comes with the DVR or through the net-viewer

program. Once converted, you can view these files through any program that supports an AVI format.

PART 8: BACKING UP VIDEO FROM THE DVR

Q-SEE QUICK SETUP GUIDE .

-4

9 | P a g e

Questions or Comments? Contact Us:

MAILING ADDRESS CUSTOMER SERVICE

Q-See Products Phone: 877-998-3440 x 538

Digital Peripheral Solutions, Inc. Email: [email protected]

8015 E. Crystal Dr. Live Chat on the homepage www.Q-See.com

Anaheim, CA 92807

WEBSITE TECH SUPPORT

http://www.q-see.com Phone: 877-998-3440 x 539

Email: [email protected]

Live Chat on the homepage www.Q-See.com

FAX

714-998-3509

Make sure you register your Q-See product.

Visit www.q-see.com, click “support”, then “online registration form”.

Complete the product registration form to receive warranty/technical

support benefits, and to be notified of product updates and free

downloadable firmware updates to your DVR.

REVISED 8/26/2010

Table des matières

Langues :

Autres manuels Q-See Système de sécurité

Q-See

Q-See QSD6209C9--250 Manuel utilisateur

Q-See

Q-See QC40108-818 Manuel utilisateur

Q-See

Q-See QC444-403 Manuel utilisateur

Q-See

Q-See QT5132 Manuel utilisateur

Q-See

Q-See QH50DVR8C Manuel utilisateur

Q-See

Q-See QSW18C Manuel utilisateur

Q-See

Q-See QT528-435 Manuel utilisateur

Q-See

Q-See QSDL503AD Manuel utilisateur

Q-See

Q-See QR40198 Manuel utilisateur

Q-See

Q-See Premium QC308-8E4 Manuel utilisateur

Q-See

Q-See QSD004C4-250 Manuel utilisateur

Q-See

Q-See QS SERIES Manuel utilisateur

Q-See

Q-See QC40198 Manuel utilisateur

Q-See

Q-See QC5416 Manuel utilisateur

Q-See

Q-See QS458-811-5 Manuel utilisateur

Q-See

Q-See QC804-261-1 NVR Manuel utilisateur

Q-See

Q-See QR4274-418 Manuel utilisateur

Q-See

Q-See QSD371614C4-250 Manuel utilisateur

Q-See

Q-See QR4074-426 Manuel utilisateur

Q-See

Q-See QC40196-833 Manuel utilisateur

Q-See

Q-See QR424-403 Manuel utilisateur

Q-See

Q-See Presidio Series Manuel utilisateur

Q-See

Q-See QT428-811 Manuel utilisateur

Q-See

Q-See QC40198 Manuel utilisateur

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur