4 5
TECHNICAL SPECIFICATIONS OF
PUREIT ADVANCED RO + MF / RO + UV*PURIFIER#
PUREIT ADVANCED RO + MF / RO + UV*
UNIQUE TECHNOLOGY
** Permeate flow rate and recovery are based on standard test conditions and may vary depending on input water quality, TDS,
pressure and life of filter elements.
*** Input water quality and TDS content are important determinants of output water quality.
**** If input pressure exceeds 30 PSI, please install a company-provided Pressure Reducing Valve at an additional cost.
If the pressure is lesser than 5 PSI than you need to buy a Pressure Enhancing Pump at an additional cost.
#Technical specifications are subject to change or improvement without prior notice.
## Only in Advanced RO + MF.
RO Membrane
Removes dissolved salts, hardness, pesticides
and heavy metals like arsenic, lead and mercury.
It also removes microbial contaminants like
bacteria, virus, protozoa and cysts.
Micro Filtration (MF) Membrane /
Ultraviolet (UV) Chamber*
Micro Filtration (MF) / UV Chamber added
Post-RO, which ensures that the water is purified
not once, but twice.
Post-RO Carbon Filter
Last level of purification acts as a polisher and
enhances the taste of purified water.
4
5
6
Pre-Sediment Filter
Removes fine and coarse particulate
impurities/dirt and improves the life of
the carbon filter.
Pre-RO Carbon Filter
Removes chlorine and organic
impurities like harmful pesticides. It also
adsorbs bad taste and odour causing
organic compounds from water.
Post-Carbon Sediment Filter
Removes remaining fine and coarse
particulate impurities/dirt and improves
the life of RO Membrane.
1
2
3
Pureit Advanced RO + MF / RO + UV* Purifier
Height 422.6 mm
Width 380 mm
Depth 165.6 mm
Weight of Pureit Advanced RO + MF / RO +
UV*~ 5.8 kg–(dry weight)
Flow Rate** Approximately 9–12 litres per hour
Storage Tank Capacity 5 litres
6-stage Purifying Technology
PP Melt Blown Pre-Sediment Filter, Pre-RO Carbon Filter, Post-Carbon Sediment
Filter, Reverse Osmosis Membrane, Micro Filtration / UV Chamber and Post-RO
Carbon Filter
Membrane Type Thin film composite spiral wound
Pump Type Diaphragm pump, 24 V dc
% Recovery** Typically 20–25%
TDS Reduction*** 90% (min)
Power Rating Advanced RO + MF - 36 Watts / Advanced RO + UV - 55 Watts
Pressure Rating 5–30 PSI****
Rated Voltage (Operating Voltage) 165 - 240 V ac; 50 Hz
Material of Construction for Plastic Parts Food safe, non-toxic, engineering-grade plastics
Length of Power Adaptor 1.5 metre
Total Dissolved Solids 200 mg/lit (min) – 1800 mg/lit (max)
Total Hardness 600 mg/lit (max)
Iron 0.3 mg/lit (max)
Turbidity 1NTU (max)
SPECIFICATIONS OF PUREIT GERMKILL KIT™
Germkill Kit™
Material of Construction Food safe, non-toxic, engineering-grade plastics
Pre-Sediment Filter Pre-Sediment Filter – 1No
GKK-1
Pre-Sediment Filter – 2 Nos
Pre-RO Carbon Filter – 1No
Post-RO Carbon Filter – 1No
GKK-2
Pre-Sediment Filter – 2 Nos
Pre-RO Carbon Filter – 1No
Post-RO Carbon Filter – 1No
Post-Carbon Sediment Filter – 1No
RO Membrane – 1No
Micro Filtration Membrane – 1No##
Germkill Performance Standard Meets stringent international criteria for microbiologically
safe drinking water – e.g., Environmental Protection Agency (EPA), USA
Reject Water
5
4
3
2
1
6
