Puredry PD 2419 Sofia Manuel utilisateur
l The unit’s circuit board (PCB) has an included safety fuse for overcurrent protection.
You may find the speciifcations of the fuse, marked on the circuit board, for example:
T 3.15A/250V (or 350V), etc.
l To connect or disconnect the device hold with one hand the socket and pull with the
other.
Please be sure that the plug that you put
the device is grounded. Do not use adapter
plug.
For warranty purposes, please
note the SN (serial number). The
SN is labeled at the rear of the
device.
4) Before the initial operation place the
device in vertical possition and let it sit for
2 hours to avoid malfunctions.
5)
)Before the initial operation, please
check, if the water level switch,
located within the water tank area,
is in the right position.
**30/235
12/13
***The dehumidifier Puredry PD2419 Sofia is specially designed to operate with the
new technology refrigerant R-290 , which by the European regulation 517/2014 (EU)
is enviromental friendly.
The fan operation cannot be maually selected to operate the fan only. It operates
automatically during the smart save energy program. When the medium or high fan
speed set the cosuption is 235W in which the compressor operates too. The
deviation rate of consuption varies according to the temprature and the humidity.
Table des matières
Langues :
Autres manuels Puredry Déshumidificateur
Puredry
Puredry DESIGN SERIES PD 130LA Manuel utilisateur
Puredry
Puredry PDD 85200 FAMOUS Manuel utilisateur
Puredry
Puredry Mini-D Manuel utilisateur
Puredry
Puredry PD 2419 Sophia Manuel utilisateur
Puredry
Puredry PD 130L Manuel utilisateur
Puredry
Puredry PD 210L Manuel utilisateur
Puredry
Puredry PDD 8519 FAMOUS Manuel utilisateur
Puredry
Puredry PD 12L Design Manuel utilisateur
Puredry
Puredry PDDW 12100 Famous Manuel utilisateur
Puredry
Puredry PD 625 Manuel utilisateur
