Pulang W922 Manuel utilisateur
Wireless Wi-Fi Video
Doorbell
Quick Start Guide
Thank you for choosing the product. Please read through the
guide before use, and keep it well for future reference.
Note: Product photos and pictures are for illustration purposes only and may
differ from the real product's appearance. This guide will be updated on a regular basis
with product feature addition or upgrade and the updates will be included in the new
revision printed without notice.
Product description
Model
W922
Infrared lamp
2PCS
Infrared
distance
3-5 meters
Power
Standby: 0.1 mW Operation: 1.8 W
Size
155*95*55 mm
Resolution
1280*720
Viewing angle
120°super wide angle
Supported
protocol
ONIF, DCT/IP, UDP, SMTP, DHCP, UPnP, P2P
Server
Server
P2P cloud server
Voice
Intercom
Half-duplex, two-way communication
Image
Compression format
H.264
Camera
OV9732
Frame rate
30 frames
Lens
2.8 mm
Night vision
Night vision
Clear
Network
Network
WIFI
Others
Waterproof grade
IP65
Battery
3.7 V 3,000 mA
Temperature
-10-55℃
Humidity
10-95% RH
Weight
315 g
Function
Real-time call, unlock, take photos, video,
recording
Solar battery charging
Optional
1Installing the doorbell
You can choose the appropriate power supply method depending on the specific
wiring.
The door machine should be installed at 1.5 meters above the ground and there should
be as few obstacles as possible between the installation location and the Wi-Fi router.
Align to the screw holes on the back of the doorbell and install two screws. Hang the
doorbell on the wall. Remove the small round cover on the front top of the doorbell,
and install screws into the wall. Install the small round back. The installation is
complete.
2Installing the app
1. If you are using an iPhone, go to App Store and search for AIBELL app, or scan
the QR code below.
2. If you are using an Android phone, go to Google Play and search for AIBELL app,
or scan the QR code below.
(Google Play) (App Store)
3Adding a device
Creating new account
1. Open the app, then tap Sign up.
2. Enter your phone number or email address.
3. Enter the password and log in.
Add the device on an iPhone
1. Tap (+) to add a device after entering the App main screen. Your phone scans the
QR code on the device.
(1) (2) (3)
2. Be sure that your phone and the device are connected to the same Wi-Fi network
and within range of 2 meters from the router. Go to Wi-Fi settings by pressing the
network setting button on the back of the machine. The orange indicator light is
on and you’re prompted to enter Wi-Fi settings screen. Tap Settings to go to
WLAN/Wi-Fi, and connect to the network named “IBELL”.
(4) (5) (6)
(7) (8) (9)
3. Once connected to Wi-Fi, your device receives the prompt “Connected” and
automatically goes to standby state.
Add the device on an Android phone
1. Tap (+) to add a device after entering the App main screen. Your phone scans the
QR code on the device.
(1) (2) (3)
2. Be sure that your phone and the device are connected to the same Wi-Fi network
and within range of 2 meters from the router. Go to Wi-Fi settings by pressing the
network setting button on the back of the machine. The orange indicator light is
on and you’re prompted to enter Wi-Fi settings screen. Select the router to which
your phone is connected, and enter the router password.
(4) (5) (6)
3. Once connected to Wi-Fi, your device receives the prompt “Connected” and
automatically goes to standby state.
4Call setting
Receiving a call
1. Press the doorbell button.
2. The LED indicator turns blue.
3. Your phone receives a doorbell push notification (If your phone has not received a
push notification, check whether Do Not Disturb mode is enabled. Turn it off if
it’s on).
4. Android phone: Upon receiving a push notification, an incoming call screen
appears. Slide Answer button to answer the call. If you slide the Decline button,
the doorbell shuts down in a few seconds.
iPhone: Tap the push notification to enter the video call screen.
5. On the video call screen, you can tap the Camera button to get a screenshot and
tap the Video recording button to record. Touch and hold the Hold to talk button
to speak with the visitor.
When the App is open on your phone
Android phone requires you to answer the call iPhone answers the call
automatically
When your phone is in standby
Android phone requires manually answering the call iPhone sends a prompt
message
Table des matières
