PTZOptics 20X-SDI Manuel utilisateur

PTZ Optics 20X-SDI

User Manual

V3.1.1

(English)

Preface

Thanks for using this HD Video Conferencing IP-Camera.

This manual introduces the function, installation and operation of the HD camera. Prior to installation and usage, please

read the manual thoroughly.

Precautions

This product can only be used in the specified conditions in order to avoid any damage to the camera:

!Don’t subject the camera to rain or moisture.

!Don’t remove the cover. Otherwise, you may get an electric shock. In case of abnormal operation, contact the

authorized engineer.

!Never operating under unspecified temperature , humidity and power supply.

!Please use the soft dry cloth to clean the camera. If the camera is very dirty, clean it with diluted neuter detergent;

do not use any type of solvents, which may damages the surface.

Note

This is class A production. Electromagnetic radiation at the specific frequency may affect the image quality of TV in

home environment.

Contents

1Note ································································································ 3

2Supplied Accessories············································································· 4

3Quick Start························································································· 5

4Features ···························································································· 8

5Product Specification ············································································ 9

6Main Unit························································································ 10

7IR Remote Controller Explanation··························································· 11

8Use IR Remote Controller····································································· 13

9RS-232 Interface················································································ 16

10Serial Communication Control ······························································· 18

11Menu Setting···················································································· 32

12Equipment Setup and internet connection···················································· 37

13IP camera visited/ controlled by LAN ························································ 38

14IP Camera accessed/controlled by WAN (internet) ······································· 42

15VLC stream media player monitoring ························································ 44

16IP Camera parameter setup····································································· 46

17Network Control················································································ 55

18V50N PTZ ON IP NETWORK································································ 58

19Maintains and Trouble Shooting ······························································ 61

Note

"Electric Safety

Installation and operation must accord with electric safety standard.

"Caution to transport

Avoid stress, vibration and soakage in transport, storage and installation.

"Polarity of power supply

The power supply of the product is +12V, the max electrical current is 2A .Polarity of the power supply plug drawing as

follows.

"Careful of installation

Do not grasp the camera head when carrying the camera. Don’t turn camera head by hand. Doing so may result in

mechanical damage.

Don’t apply in corrosive liquid, gas or solid environment to avoid damaging the cover which is made up of plastic

material.

To make sure no obstacle in rotation range.

Never power on before installation is not completed.

"Don’t dismantle the camera

We are not responsible for any unauthorized modification or dismantling.

CAUTION!

The specific frequency of electromagnetic field may affect the image of the camera!

Supplied Accessories

When you unpack, check that all the supplied accessories are included:

Camera .......................................1PCS

AC power adaptor ......................1PCS

Power cord...................................1PCS

RS232 cable.................................1PCS

Remote controller........................1PCS

User manual ...............................1PCS

Quick Start

Step1. Please check connections are correct before starting

Step2. Setting of the bottom switches

Set both of the switch1 and switch2 to ‘OFF’. That is ‘Normal Working Mode’.

Step3. Setting of the system select switch

The option of video format:

VIDEO SYSTEM

1080i60

1080i50

720p60

720p50

576i

1080p30

480i

1080p25

CAUTION:

a. After changing the switch, you need to restart the camera to take effect.

Step4. Press the Switch ON/OFF button on the rear of the camera, the power lamp light.

Step5. Pan-Tilt will rotate to the maximum position of top right after the camera started, then it return to the center, the

process of initialization is finished. (Note: If the position preset 0 has been stored, the position preset 0 will be called up after

initialization)

Step6. (Optional) If you want to restore the factory default settings, Press [MENU] button to display the OSD menu. Select

SW-1

SW-2

Modes

OFF

Normal Working Mode

OFF

the item [MENU] -> [RESTORE DEFAULT] -> [Restore]. Set the value [Yes], press [HOME] button to restore the factory

default settings.

RESTORE DEFAULT

Restore Yes

Change Value

[Home] OK

[Menu] Back

Features

1. The camera provides a high performance in low illumination situations, particularly suitable for which room's

lighting is not very well.

2. With maximum resolution of 1920 x 1080 and output frame rate up to 30 frames / sec, this camera provides

high-definition as well as fluent video.

3. The camera video signal to noise ratio directly affects the image compression coding efficiency for high-definition

video conference terminals. The camera applies 2D and 3D noise reduction at the same time based on motion estimation

algorithm, and effectively reduces the noise.

4. 20x optical zoom.

5. Three type of video output interface: HDMI interface, HD-SDI interface,CVBS interface.

6. Infrared remote control signals pass through function. The camera is capable of receiving signal from the infrared

remote controller, and passes through to the video conferencing terminal via RS232 connector.

7. Support network audio and video streams multiplexed output.

Product Specification

Video Format

1080i/60, 1080i/50, 1080p/30, 1080p/25, 720p/60, 720p/50, NTSC, PAL

Video Output Interface

HDMI,HD-SDI,CVBS

Tilt Speed Range

1.7° ~ 69.9°/s

Sensor Type

CMOS,1/3 inch

Vertical Flip&Mirror

Support

Sensor Pixel

Effective Pixel: 2.12 million;

Total Pixel: 2.20million

Preset

245

Scanning Mode

Progressive

Preset Accuracy

0.1°

Lens

20x, f4.42mm ~ 88.5mm, F1.8 ~

F2.8

Digital Noise

Reduction

2D&3D Digital Noise Reduction

Digital Zoom

16x

Network interface

RJ45

Minimal Illumination

0.5 Lux @ (F1.8, AGC ON)

Audio Interface

Line In/Line Out,3.5mm

Electronic shutter

1/25s ~ 1/10000s

USB Interface

USB2.0

White Balance

Auto, Indoor, Outdoor, One Push,

Manual

Communication

Interface

RS232,RS485

Backlight

Compensation

Supportable

Input Voltage

12V DC (10.8 ~ 13.0V DC)

SNR

55dB

Current

Consumption

2.0A (Max)

Horizontal Angle of

View

60.7° ~ 3.36°

Operating

Temperature

-5°C ~ 40°C

Vertical Angle of View

34.1° ~ 1.89°

Storage Temperature

-20°C ~ 60°C

Horizontal Rotation

Range

±170°

Power Consumption

12W

Vertical rotation range

-30° ~ +90°

Size

142mm x 169mm x 176mm

Pan Speed Range

1.7° ~ 100°/s

Weight

1.5Kg

Table des matières

Autres manuels PTZOptics Système de conférence

PTZOptics

PTZOptics PT12X-USB-GY-G2 Manuel utilisateur

PTZOptics

PTZOptics 12X NDI|HX ZCAM Manuel utilisateur

PTZOptics

PTZOptics PT20X-SDI-WH-G2 Manuel utilisateur

PTZOptics

PTZOptics PT-STUDIOPRO Manuel utilisateur

PTZOptics

PTZOptics PT12X-NDI-GY Manuel utilisateur

PTZOptics

PTZOptics PT20X-USB-WH-G2 Manuel utilisateur

PTZOptics

PTZOptics PT30X-NDI-GY Manuel utilisateur

Manuels Système de conférence populaires d'autres marques

Kramer

Kramer VIA GO Manuel utilisateur

AVT

AVT MAGIC AC1 Go Manuel utilisateur

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Manuel utilisateur

Sony

Sony PCS-I150 Manuel utilisateur

Middle Atlantic Products

Middle Atlantic Products VTC Series Manuel utilisateur

Prentke Romich Company

Prentke Romich Company Vanguard Plus Mode d’emploi

Speakerbus

Speakerbus iD 712 Manuel utilisateur

Trelleborg

Trelleborg SafePilot CAT PRO Manuel utilisateur

Sennheiser

Sennheiser ADN Manuel utilisateur

ADTRAN

ADTRAN NetVanta 7100 Manuel utilisateur

AINA

AINA PTT Voice Responder Manuel utilisateur

Yamaha

Yamaha ProjectPhone PJP-100H Manuel utilisateur

vissonic

vissonic VLI Series Manuel utilisateur

Panasonic

Panasonic KX-VC500 Manuel utilisateur

Poly

Poly Trio 8300 Manuel utilisateur

Crestron

Crestron Mercury CCS-UCA-SMK Dessin dimensionnel

Inmarsat

Inmarsat mini M Manuel utilisateur

Tenveo

Tenveo ALL-IN-ONE Manuel utilisateur