
LED lights: This speaker comes with 10 different LED light modes; you can customize the lights for perfect vibes.
1. Change the Led light mode: You can change the LED light by long pressing the Mode “M” button.
2. Turn off these lights: Press & hold (2 sec) ten times mode “M” button to turn off the LED lights.
How to establish a TWS connection?
1. Turn on both the devices, speaker in proximity of each other within 1m distance.
2. Select one of the devices and double-press the Mode "M" button. Both devices will pair with each other, and
the speaker will respond with a voice prompt "Paired successfully”.
3. In your phone, search for ” pTron BT speaker” and click on the same. Once the connection has been established
the two devices can play music simultaneously.
4. To disconnect TWS, kindly double-press the Mode "M" button.
5. Wish to establish a TWS connection again- Switch the mode back to Bluetooth Mode, then double-press the
Mode "M" button. Both speakers will connect automatically.
Troubleshooting Scenario 1: Connectivity Issue
1. Turn OFF the Speaker and charge 100%.
2. UN-pair with the connected Bluetooth device.
3. Restart the Bluetooth device.
4. After 100% charging switch ON the speaker and pair it with the Bluetooth device again.
Troubleshooting Scenario 2: Sound is distorted/low volume/low bass/low quality?
1. Check if the connected device does not have any equalizer settings applied.
2. Check if the problem still occurs if the device is moved closer and all obstacles in the middle are removed.
3. Check if the distortion or quality lowers at all volumes or only at high volumes.
4. Check the sound on different media players and different devices and if the distortion happens on all devices or
only on specific ones.
5. Check if the problem occurs at all levels of charging or only at low charging levels.
6. Check if the speaker does not have water droplets, in case they do, use the blow dryer to dry out any water
from a distance.
Safety Precautions
Keep the device out of extreme heat and humidity or corrosive environment.
Play time may vary depending on personal habits.
Using incompatible USB cable or high voltage chargers can damage the product & void the product warranty.
We strongly recommend using a good quality DC5V-1A chargers & the USB cable included in the package.
Please don't over-charge the product as it will decrease the service life of battery.
Read all warnings on the product and in the operating instructions.
Don’t jam the ports such as charger port, LED port, etc.
It is recommended to utilize the product below the maximum volume in order to protect your hearing.
Please don’t open/temper the product or product’s battery.
Please keep the product out of children’s reach.
Dispose the product responsibly and adhere to your local authority guidelines.
Packing Box Content
1 Sound Bar Speaker, 1 Micro USB charging cable, 1 Aux cable, 1 User Manual/Warranty QR Card
What is Covered in Warranty?
Manufacturing defects in materials and workmanship of the product ONLY. This warranty applies when the
product is used under normal conditions and the purpose for which the product was designed.
No warranty on product accessories such as charging USB cables.
To avail warranty, Product Registration is Mandatory at https://ptron.in/apps/product-registration
Please read through the complete warranty details at https://ptron.in/pages/repair-service-warranty