4. Remote control
4.1 Entering system
Press “ *XXXX# ” →CALL →Green light is on. (XXXX is the initial code
“1234”.)
4.2 Add user card
Press “ *11# ” →CALL →Green light flashes →Swipe user cards
continuously.
Press “ *# ” →CALL →Green light is off →End.
4.3 The operation of adding user card and function of unlocking
(When the card reader is broken down, after changed a new card reader,
users will use their own user cards to swipe to add user cards and unlock
the door.)
Press “ *13# ” →CALL →Green light flashes →Swiping user
cards continuously. (This process will not exit automatically.)
Press “ *# ” →CALL→Green light is off →End.
4.4 Add user card
Press “ *12# ” →CALL →?????????????? →#CALL
(??????????????: means the 14 digit numbers on user card.)
Press “ EXIT” to exit the process.
If the user card is successfully added →Beep, Beep
If not →Beep, Beep Beep
4.5 Delete user card by swiping cards
Press “*21#” →CALL →Green light is on.
Press “*#” →CALL →Green light is off →End.
