8
6. Installation instructions
Please strictly follow the warnings and operating instructions in the manual and on the
machine and keep this manual properly. Please do not operate this machine before reading all the
safety instructions and operating instructions, otherwise it will damage the equipment and cause
personal safety accidents.
6.1. Unpacking inspection
The inverter power supply has been strictly inspected before leaving the factory, but it may
be damaged during transportation. Therefore, after unpacking, please check whether the following
items are complete and whether the model, power, input voltage, output voltage, etc. are
consistent with the order The specified content matches; if there is an abnormality or the content
does not match, please contact our company as soon as possible.
6.2. Handling
This product should be handled with care during transportation to avoid falling, collision and
strong vibration. It is strictly forbidden to turn the packaging box upside down. Do not lose
accessories, instruction manuals, warranty cards, etc. when unpacking and transporting. In
addition, this product is large and heavy. Please pay attention to safety when handling it to avoid
injury to your body.
6.3. Installation instructions
1. When installing the inverter power supply, it must be done by professionals or with the
assistance of local dealers.
2. Confirm whether the input DC power supply voltage range meets the requirements, ie +15%,
and whether the power supply polarity is correct.
3. Confirm the voltage level of the load equipment, and the power should not be greater than the
rated output power of the inverter power supply.
4. Do not pour liquid into the inverter power supply, or wipe the machine casing with a damp
cloth. The human body cannot be directly when the machine is running
Touch the input and output terminals of the inverter power supply, especially with wet hands,
otherwise it may cause electric shock.
5. If the working environment of the normal inverter power supply needs to be changed, it is not
allowed to change its connection by yourself, and a professional should be
The operator or dealer confirms the operation.
6. The operating environment of the electric power supply should be in a well-ventilated
environment with a temperature range of -25 to 50°C and a relative humidity of 30%-90%.
When using, keep it away from open flames and direct sunlight. No corrosive gas, oil mist, water
splash, salt mist, rain, humidity, and can not operate in condensation and dust environment. If the
altitude is below 1000m, please decide to use|great to use|data to use|drive to use|rate to use|dare to
use|date to use|dream to use|rewrite to use|treat to use if it exceeds this altitude. A certain amount
of heat is normal during use, but the installation environment must be kept clean and clean,
especially not blocking the ventilation holes.
7. Minors are not allowed to use this product.
8. Confirm that the ground wire of the inverter power supply is reliably connected, the live wire
and the neutral wire cannot be reversed, and the wire diameter should meet the conditions for safe
use, The connection line should be as short as possible.
9. Please do not open the inverter power supply case by yourself, otherwise we will not be
responsible for the warranty.
10. No objects can be placed on the top of the equipment; sufficient space for inspection and
repair must be prepared directly in front of and above the equipment, and the power cord must be
wired from the bottom of the machine;
Notice:
A. This product cannot be used for life-sustaining equipment without permission.
B. This inverter power supply is not suitable for ultra-high-precision electronic equipment, it
needs to be confirmed by professional and technical personnel before it can be used
run.
C. If it is used for computer load, the built-in power supply of the computer should be a brand
power supply.
warn!
