PSC Scanning SP*ACE Manuel utilisateur
User's Guide
Benutzerhandbuch
Guia del Usuario
Guide de L'Utilisateur
Manuale d'Uso
TM
PSC Scanning, INC.
959 Terry Street
Eugene, Oregon 97402-9120
Telephone: (541) 683-5700
Toll Free: (800) 547-2507
Telefax: (541) 686-1702
PSC and the PSC logo are registered trademarks of PSC INC.
This manual and the procedures described in it are copyrighted, with all rights
reserved. Under copyright law, this manual may not be copied in whole or part
without prior written consent from PSC. The same proprietary and copyright
notice must appear on any permitted copies as appears on the original. This
exception does not permit copies to be made for others, whether or not sold.
Under the law, copying includes translating into another language or format
including electronic media.
Disclaimer
Reasonable measures have been taken to ensure that all informa-
tion contained in this manual is complete and accurate. However,
PSC reserves the right to change any specification at any time
without prior notice.
BLANK PAGE
R44-1132 1
TABLE OF CONTENTS
PRODUCT OVERVIEW .................................................................. 3
OPERATIONAL OVERVIEW ............................................................. 3
ROTATING THE SCAN HEAD .......................................................... 4
CONTROLS, INDICATORS & CONNECTORS......................................... 5
CONTROLS ......................................................................... 6
INDICATORS ....................................................................... 7
SPEAKER ........................................................................... 8
CONNECTORS ..................................................................... 9
UNPACKING............................................................................ 10
VERIFY SCANNER OPERATION ..................................................... 11
INSTALLATION
COUNTERTOP INSTALLATION ................................................. 12
PEDESTAL INSTALLATION ..................................................... 14
WALL MOUNT INSTALLATION................................................ 16
CONNECTING THE SCANNER ....................................................... 19
POWER-UPPROCEDURE ........................................................... 20
PROBLEM ISOLATION ................................................................ 21
ISOLATED SCANNER TEST .......................................................... 22
HOW TO SCAN........................................................................ 23
CUSTOMIZING YOUR SCANNER'SOPERATION .................................. 24
CHANGING THE TONE ......................................................... 24
CHANGING THE VOLUME ..................................................... 25
CLEANING .............................................................................. 26
OTHER PROGRAMMABLE FEATURES .............................................. 27
SPECIFICATIONS ...................................................................... 28
LASER & PRODUCT SAFETY ....................................................... 31
2
SP*ACE
User's Guide
Blank Page
R44-1132 3
PRODUCT OVERVIEW
The
SP*ACE
scanner can be easily mounted for either countertop or
wall mounted installation and the scan head can be rotated 270°.
This versatile mounting scheme facilitates easy and effective posi-
tioning in virtually any POS environment. The
SP*ACE
scanner
incorporates both advanced digital software and high frequency
power conversion circuitry to achieve the highest levels of scanning
performance in the smallest possible package. Power can be sup-
plied either through the POS interface cable or via a small accessory
12 volt power supply.
Additional innovative features include:
• asterisk scan pattern eliminates the need for label
orientation
• presentation scanning that requires minimum space
while providing a well-defined scan area
• user programmable features such as speaker volume
and tone
• automatic shutdown when scanner is left idle which
prolongs life of scanner motor and laser
• motion sensor that "knows" when you are ready to use it
OPERATIONAL OVERVIEW
There are three operational states called Normal Mode, Sleep Mode
and Programming Mode. The indicator lamp description that
follows tells how to identify these three states.
NORMAL MODE
Normal Mode refers to operation and idle time before the scanner
enters Sleep Mode.
4
SP*ACE
User's Guide
SLEEP MODE
Sleep Mode is the term used to describe the scanner's condition after
the motor and/or laser have automatically switched off due to a
prolonged period of inactivity.
PROGRAMMING MODE
Programing Mode is a special condition used to change scanner
features such as the user interface, scanner to host interface param-
eters, or laser and motor time-outs. Programming Mode also
disallows scanning of normal barcodes or sending data to the host.
A set of special programming barcodes are contained in the Pro-
gramming Kit (R44-1140) that is available from PSC or your dealer or
distributor.
ROTATING THE SCAN HEAD
The
SP*ACE
scanner's head can be
rotated 270°degrees (180°for-
ward and 90°backward) to
accommodate many scanner
mounting options. Follow the
instructions below to rotate the
scan head.
➀Grasp the scanner as shown.
➁Pull the scan head to the right
and the gap between the two
halves will open. This releases the
locking mechanism.
➂Rotate the scanner head to the
desired position and release the
head. If the gap doesn't close, rotate
the head slightly until the gap
closes.
➀
SCANNER
BODY
SCANNER
HEAD
➁GAP
➂
R44-1132 5
CONTROLS, INDICATORS & CONNECTORS
Indicator
Lamp
Operator
Switch
Motion
Sensor
Speaker
Interface
Connector
DC Power
Connector
Bottom
View
6
SP*ACE
User's Guide
CONTROLS
OPERATOR SWITCH
The operator switch has three functions: wake-up the scanner (exit
Sleep Mode), enter Programming Mode and Volume Selection.
WAKE-UPSCANNER
If green lamp is flashing slowly, the scanner is in Sleep Mode.
Pressing and releasing the switch quickly (within three seconds) will
wake the scanner up and return it to normal operation. This feature
is a back-up to the motion sensor's automatic wake-up function.
ENTER PROGRAMMING MODE
Programming describes the process of changing scanner features
using the special barcode labels contained in the Programming
Guide (R44-1140). When the scanner is placed in Programming
Mode, the scanner will not read any standard barcode labels or
transmit any data to the host.
Pressing and holding the switch until you hear a tone and then
releasing the switch before a second tone sounds places the scanner
in Programming Mode. The indicator lamp will flash continuously
two times per second until you exit Programming Mode.
The Programming Guide contains a description of Programming
Mode and complete instructions for customizing your scanner's
features.
VOLUME SELECTION
Enter Volume Selection by pressing and holding the switch longer
than eight seconds until a second tone sounds. The second, alternate
tone indicates that the scanner has entered Volume Selection. The
scanner will cycle through the four volume selections sounding each
one three times. Press the switch immediately after the desired
volume has sounded to select that volume. Removing power from
the scanner causes this setting to be forgotten. To change and keep
this setting, you must use the barcode labels in the Programming
Guide.
Table des matières
Langues :
Autres manuels PSC Scanning Lecteur de codes-barres
Manuels Lecteur de codes-barres populaires d'autres marques
POSMicro
POSMicro Datalogic PowerScan D7100 Manuel utilisateur
Marson
Marson MT780 Guide de configuration rapide
NCR
NCR RealPOS Manuel utilisateur
Motorola
Motorola SE3300 Guide de configuration rapide
Element
Element P130BT Manuel utilisateur
Motorola
Motorola Symbol LS3008 Manuel d'installation et d'exploitation
