Pairing With an Audio Accessory
STEP TWO: Pairing the Bluetooth headset with the HYTERA two-way radio
To pair the wireless Bluetooth headset and two-way radio:
* Place the Bluetooth headset into pairing mode by following the instructions in the user's manual
for the Bluetooth headset.
* Follow the procedure described in the HYTERA radio user's guide enable the Bluetooth function.
* Follow the procedure described in the HYTERA radio user's guide to scan for nearby Bluetooth
headsets and connect the radio and headset.
* For further assistance, contact your HYTERA support or your two-way radio dealer.
STEP THREE: Pairing the BT-PTT2-HY and HYTERA two-way radio
* Place the PRYMEBLU BT-PTT2-HY in pairing mode by holding down the Push-To-Talk button
while turning the power on using the Power Button on the side of the device. Continue to hold
down the Push-To-Talk button until the LED indicator on the PRYMEBLU BT-PTT2 shows two blue
ashes every second. You can then release the Push-to-Talk button. The PRYMEBLU BT-PTT2 is
now in pairing mode.
* Follow the procedure described in the HYTERA radio user's guide enable the Bluetooth function.
* Follow the procedure described in the HYTERA radio user's guide to have the radio scan for
nearby Bluetooth PTT devices.
* On the radio, select the BT-PTT2-HY as the device to pair with. If the password is required,
enter"0000".
* Once the radio and PRYMEBLU BT-PTT2 are paired with each other, the status LED on the
PRYMEBLU Adapter will show a constant blue light for three seconds and the LED on the PTT
will show one blue ash every six seconds.
* If the PRYMEBLU BT-PTT2 does not detect a compatible wireless accessory within 60 seconds
of being put into pairing mode, the devices will exit the pairing mode and resume normal operation.
6
8
5
7
Status LED Messages
The meanings of the various status LED messages shown by the
PRYMEBLU BT-PTT2-HY are shown on the following table:
Specifications
Support and Warranty
PRYME Radio Products warrants this product against defects in materials or workmanship for
a period of one year from the date of retail purchase. PRYME will repair or replace a defective
unit, at our option, without charge for parts or labor. The limited warranty is extended only to
the original purchaser and is valid only to consumers in the United States and Canada. It does
not cover damage or failure caused by or attributable to Acts of God, abuse, misuse, improper
or abnormal usage, faulty installation, improper maintenance, lightning, or other incidences of
excessive voltage, or any tampering or repairs by other than a PRYME authorized repair
facility. It does not cover replacement of consumable parts, transportation costs, or damage in
transit.
Repair or replacement under the terms of this warranty does not extend the terms of this
warranty. This warranty can only be modied by an ofcer of PRYME Radio Products, and
then only in writing. Should this product prove defective in workmanship or material, the
consumer’s sole remedies shall be such repair or replacement as provided by the terms of this
warranty. Under no circumstances shall PRYME Radio Products be liable for any loss or
damage, direct, consequential, or incidental, arising out of the use of or inability to use this
product. Some states do not allow limitations on how long an implied warranty lasts or the
exclusions or limitations of incidental or consequential damages, so the above limitations or
exclusions may not apply to you. This warranty gives you specic legal rights.
You may also have other rights, which may vary, from state to state.
For support or warranty service on your PRYME product, contact us at 1-800-666-2654 or visit
us on the web at www.PRYME.com.
COPYRIGHT AND TRADEMARK INFO
© 2016 PRYME Radio Products, Brea CA. All rights reserved.
PRYME® and PRYMEBLU™ are trademarks owned by PRYME Radio Products. All other
product or service names are the property of their respective owners.
HYTERA is a trademark of HYTERA COMMUNICATIONS CO., LTD
DISCLAIMER: The Bluetooth wireless link used by PRYMEBLU products is an open standard,
unsecured technology. As such, it is not recommended for rst-responder or other mission
critical users.
Testing and Using the PRYMEBLU BT-PTT2-HY
Step 1:
Charge
Step 4:
Test and Use
STEP FOUR: Testing and Using the PRYMEBLU BT-PTT2-HY
After the Bluetooth headset and BT-PTT2-HY have been paired to the Hytera two-way radio,
* Turn on the HYTERA two-way radio and make sure that the Bluetooth feature is enabled.
* Turn on the Bluetooth headset. Within a few seconds the HYTERA two-way radio and
Bluetooth headset should connect to each other.
* Turn on the PRYMEBLU BT-PTT2-HY. The LED indicator on the PRYMEBLU BT-PTT2-HY
will ash rapidly. Within a few seconds the LED indicator will show one blue ash per
second, indicating that it is connected wirelessly to the HYTERA two-way radio.
*You will now be able to operate using the wireless accessories. Pressing the Push-to-Talk
button on the PRYMEBLU BT-PTT2-HY will cause the two-way radio to transmit. Transmit
audio will be picked up by the Bluetooth headset. Received signals will also be heard
through the Bluetooth headset’s earphone.
Step 3:
Pair Devices
Step 2:
Pair Headset
LED INDICATION
No indication
Two blue ashes every second
One blue ash ever six seconds
Continuous solid red
Repeated rapid blue ash
One blue ash every second
Continuous solid blue (when connected to charger)
No indication (when connected to charger)
MEANING
Device is powered off
Pairing mode
Bluetooth connected
PTT button pressed
Bluetooth link lost
Battery low
Device charging
Device nished charging
Operating temperature:
Storage temperature:
Size:
Weight:
Bluetooth Version:
Chip set:
Receiver Sensitivity:
Bluetooth Power Class:
Maximum Range:
Display:
Bluetooth Prole Support:
DC Input:
Current Draw:
Battery:
Charging Type:
-20 ° C to 50 ° C
-40 ° C to 80 ° C
65mm (H) x 30mm (W) x 17mm (D)
25 grams
Fully Qualied Bluetooth v2.1
CSR BC5 + 16MB external Flash
-82 dBm (typical)
Class 2
10 meters
Two color LED
SPP (Serial Port) Prole
5 VDC
16 mA (average), 20 mA (maximum)
240mAh Lithium-Ion
USB
