Proxy PEMW Manuel utilisateur
User Manual and Installation Guide
Mobile Reader
Edge
www.proxy.com | support@proxy.com
Last updated: February 10, 2020
Contacts
For additional offices around the world , see https://www.proxy.com/contact
Proxy,Inc.
San Francisco (Global Headquarters)
500 3rd Street #245
San Francisco, CA 94107
USA
Proxy Technical Support: https://support.proxy.com/hc/en-us
|2 User Manual and Installation Guide: Proxy Mobile Reader Edge
This document may have been updated since printing — for the latest, please visit https://proxy.com/s/edge-install
Table of Contents
Introduction 5
Edge Reader 5
Functionality 5
Edge Reader Enclosure 6
Edge Reader Enclosure Wall Plate 6
Edge Relay Enclosure 7
Edge Relay Enclosure Wall Plate 7
Product Details 8
RF Exposure Information 8
Product Specications 9
Installation Details 9
Parts List 9
Recommended Tools 9
Wire connecters (dry/wet) 9
Recommended Infrastructure 10
Wiring Harness Information 10
Cable colors for Edge Reader Enclosure [5 Core Grey] 10
Cable colors for Edge Relay Enclosure [5 Core Grey] 10
Cable colors for Edge Relay Enclosure [8 Core Black] 11
Wiring Recommendations 12
Mounting the Edge Reader 13
Location of mounting holes on wall 13
Edge Reader Installation Steps 14
Wiring Diagrams and Steps 15
Door Contacts 16
Power up and Testing 17
Certications 17
FCC 17
IC 19
CE 19
UL294 21
Install Troubleshooting 21
Warranty 22
|3 User Manual and Installation Guide: Proxy Mobile Reader Edge
This document may have been updated since printing — for the latest, please visit https://proxy.com/s/edge-install
Introduction
This document details the Proxy Mobile Reader Edge and its basic operational and installation
procedures. It covers the details of the Proxy Mobile Reader Edge form-factor.
Model(s):
●Proxy Mobile Reader Edge White [Reader PEMW, Relay PERW]
●Proxy Mobile Reader Edge Black [Reader PEMK, Relay PERK]
Version(s):
●1.0, 1.1, 1.2, 1.3
Edge Reader
Functionality
Proxy Mobile Reader Edge is a standalone physical access control wireless mobile credential reader
that provides contactless credentials over Bluetooth Low Energy (BLE). The Edge Reader interfaces
directly with electried door hardware to allow direct access to a single point of entry. The Proxy Mobile
Reader Edge consists of the following main parts.
|5 User Manual and Installation Guide: Proxy Mobile Reader Edge
This document may have been updated since printing — for the latest, please visit https://proxy.com/s/edge-install
Product Specications
Model Name: Mobile Reader Edge
Device Type: Mobile Credential: Bluetooth Low Energy (BLE)
Physical Access Control Reader (accessory equipment)
Type of Equipment: Sealed Edge Reader (Suitable for Indoor and Outdoor use)
Unsealed Edge Relay (Suitable for Indoor use only)
Interface Type: Pigtail Cable Edge Reader Enclosure [5 Core Grey]
Pigtail Edge Relay Enclosure [5 Core Grey, 8 Core Black]
Input Voltage (v1.0, v1.1): 6V - 12V DC (12V recommended)
Input Voltage (v1.2 and above): 6V - 30V DC (12V recommended)
Current Draw: 500 mA @ 12V DC
Power Consumption: 6W (Max)
Communication Protocol: BLE, IEEE 802.11b/g/n
Credential Type: Proxy Mobile Credential
Credential Transmission Technology: BLE (2.4GHz)
Dimensions (Edge Reader): 128.3 mm x 44.7 mm x 24.6 mm (H x L x W)
Dimensions (Edge Relay): 72 mm x 44.5 mm x 23.9 mm (H x L x W)
Product Weight: 308 g
Operating Temperature: -35° to 66°C (-31° to 149°F)
Operating Humidity: 5 to 95% relative humidity (non-condensing)
RF Exposure Information
This device has been tested and meets applicable limits for Radio Frequency (RF) exposure.
This equipment should be installed and operated with minimum distance 20 cm between the radiator
and your body.
|8 User Manual and Installation Guide: Proxy Mobile Reader Edge
This document may have been updated since printing — for the latest, please visit https://proxy.com/s/edge-install
Installation Details
Wiring methods shall be in accordance with the National Electrical Code (ANSI/NFPA70), local codes,
and the authorities having jurisdiction.
Parts List
●Edge Reader – x1
●Edge Relay – x1
●Mounting Screws (A) – #6-32 x 1” (Phillips) – x4
●Security Screw (B) – #6-32 x 3/8” (Tamper Resistant) – x2
●Nylon anchor plugs – #6 x 1” – x4
Recommended Tools
●Wire Stripper(s) (18-24 AWG)
●Screwdrivers
●Tamper resistant torx bit (TR10)
●Wire connecters (dry/wet)
●Electrical Tape
|9 User Manual and Installation Guide: Proxy Mobile Reader Edge
This document may have been updated since printing — for the latest, please visit https://proxy.com/s/edge-install
Recommended Infrastructure
●All cabling and wiring shall be UL Listed and/or UL Recognized
●Refer to Wiring Recommendations for guidance on wire type and length
●Power Supply- Sufficient to provide 500mA @ 12V DC plus power for door hardware. See door
hardware manufacturer's specications.
Important: Edge Reader and Edge Relay can NOT be installed at a distance greater than 30 ft (10 m)
from each other
Wiring Harness Information
Cable colors for Edge Reader Enclosure [5 Core Grey]
Name
Colors
Colors
Sheath Color
UART TX
Green
UART RX
White
5V (v1.0, v1.1) / +VDC (v1.2 and above)
Red
3V3 (v1.0, v1.1) / GPIO (v1.2 and above)
Yellow
GND
Black
Cable colors for Edge Relay Enclosure [5 Core Grey]
Name
Colors
Colors
Sheath Color
UART RX
Green
UART TX
White
5V (v1.0, v1.1) / +VDC (v1.2 and above)
Red
3V3 (v1.0, v1.1) / GPIO (v1.2 and above)
Yellow
GND
Black
|10 User Manual and Installation Guide: Proxy Mobile Reader Edge
This document may have been updated since printing — for the latest, please visit https://proxy.com/s/edge-install
Ce manuel convient aux modèles suivants
3
Table des matières
