Provision ISR DAI-310IPVF Manuel utilisateur
PROVISION-ISR
DAI-310IPVF
I4-310IPVF
DAI-390IPVF
I4-390IPVF
BX-390IP
DAI-380IPVF
I4-380IPVF
BX-380IP
User Manual
IP Camera
For H.264 IP Camera
All rights reserved
Notes
Before operation, we strongly advise users to read this manual and keep it for later use.
Please use the specified power supply to connect.
Avoid from incorrect operation, shock vibration, heavy pressing which can cause
damage to product.
Do not use corrosive detergent to clean main body of the camera. If necessary, please
use soft dry cloth to wipe dirt; for hard contamination, use neutral detergent. Any
cleanser for high grade furniture is applicable.
Avoid aiming the camera directly towards extremely bright objects, such as, sun, as this
may damage the image sensor.
Please follow the instructions to install the camera. Do not reverse the camera, or the
reversing image will be received.
Do not operate the camera in extreme temperatures or extreme humidity conditions.
Use the power supply supplied authorized by a PROVISION-ISR technician.
Keep away from heat sources such as radiators, heat registers, stove, etc.
The instructions in this manual could be outdated; if you need any clarifications you can
contact an authorized PROVISION-ISR technician. PROVISION-ISR reserves the
right to add changes to this manual and publish it online in our website
(www.provision-isr.com): there may be inconsistencies with the latest version. This
applies to any and all software upgrades and product improvements, interpretation and
modification added. These changes will be published in the latest version without
prior notification.
When this product is in use, the relevant contents of Microsoft, Apple and Google will
be involved in. The pictures and screenshots in this manual are only used to explain
the usage of our product. The ownerships of trademarks, logos and other intellectual
properties related to Microsoft, Apple and Google belong to the above-mentioned
companies.
All pictures and examples used in the manual are for reference only.
IP CAMERA USER MANUAL
Table of Contents
1Introduction ......................................................................................................... 1
2IE Remote Access ................................................................................................. 2
2.1LAN ................................................................................................................................... 2
2.1.1Access through IP-Tool ......................................................................................... 2
2.1.2Directly Access through IE .................................................................................... 3
2.2WA N .................................................................................................................................. 4
3Remote Preview ................................................................................................... 6
3.1The Remote Preview Interface .............................................................................................. 6
3.2Playback ............................................................................................................................. 7
3.3Snap Pictures ....................................................................................................................... 8
4Remote Live Surveillance ..................................................................................... 9
4.1System Configuration ........................................................................................................... 9
4.1.1Basic Information................................................................................................. 9
4.1.2Date & Time Configuration ................................................................................. 10
4.1.3SD Card ............................................................................................................ 10
4.2Video Configuration ........................................................................................................... 10
4.2.1Camera Configuration ........................................................................................ 11
4.2.2Video Stream ..................................................................................................... 11
4.2.3OSD Configuration ............................................................................................ 12
4.2.4Video Mask ....................................................................................................... 12
4.2.5ROI Configuration ............................................................................................. 13
4.3PTZ Configuration ............................................................................................................. 14
4.3.1Protocol ............................................................................................................ 14
4.3.2Preset Configuration ........................................................................................... 15
4.4Alarm Configuration .......................................................................................................... 16
4.4.1Motion Detection Area ....................................................................................... 16
4.4.2Motion Detection Trigger .................................................................................... 16
4.4.3Motion Detection Schedule ................................................................................. 17
4.4.4Alarm Input Trigger ........................................................................................... 18
4.4.5Alarm Input Schedule ......................................................................................... 18
4.4.6Alarm Out ......................................................................................................... 19
4.5Network Configuration ....................................................................................................... 19
4.5.1Port .................................................................................................................. 19
4.5.2IP Address ......................................................................................................... 19
4.5.3Server Configuration .......................................................................................... 20
4.5.4IP Notify ........................................................................................................... 20
4.5.5DDNS Configuration .......................................................................................... 21
4.5.6RTSP ................................................................................................................ 24
4.5.7UPnP ................................................................................................................ 25
4.5.8Mail Setting ....................................................................................................... 25
4.5.9FTP .................................................................................................................. 26
4.6Advanced Configuration ..................................................................................................... 26
IP CAMERA USER MANUAL
4.6.1User Configuration ............................................................................................. 26
4.6.2Security Configuration ........................................................................................ 28
4.6.3Configure Backup & Restore ............................................................................... 28
4.6.4Reboot Device ................................................................................................... 29
4.6.5Upgrade ............................................................................................................ 29
5Mobile Surveillance............................................................................................ 30
5.1Network Configuration ....................................................................................................... 30
5.2By Phones with iPhone OS ................................................................................................. 30
7.3 By Phones with Android .................................................................................................................. 36
6IP-Tool ............................................................................................................... 39
7Q & A ................................................................................................................ 42
Page 1 IP CAMERA USER MANUAL
1 Introduction
This IP-CAMERA (short for IP-CAM) is designed for high performance CCTV solutions. It
adopts state of the art video processing chips. It utilizes most advanced technologies, such as
video encoding and decoding technology, complies with the TCP/IP protocol, SoC, etc to
ensure this system more stable and reliable. This unit consists of two parts: the IP-CAM
device and central management software (short for CMS). The CMS centralizes all devices
together via internet or LAN and establishes a sound surveillance system to realize unified
management and remote operation to all devices in one network.
This product is widely used in banks, telecommunication systems, electricity power
departments, law systems, factories, storehouses, uptowns, etc. In addition, it is also an ideal
choice for surveillance sites with middle or high risks.
Main Features
ICR auto switch, true day/night
3D DNR, digital WDR
ROI coding
Support CVBS output
Support MIC in/out
Support alarm in/out
Support RS485 connection
PoE power supply
Manual or auto varifocal lens
Support smart phone, iPad, remote monitoring
Page 2 IP CAMERA USER MANUAL
2 IE Remote Access
You may connect IP-Cam via LAN or WAN. Here only take IE browser (6.0) for example.
The details are as follows:
2.1 LAN
In LAN, there are two ways to access IP-Cam: 1. Access through IP-Tool; 2. Directly access
through IE browser.
2.1.1 Access through IP-Tool
① Make sure the PC and IP-Cam are connected to the LAN and the IP-Tool is installed in the
PC from the CD.
② Double click the IP-Tool icon on the desktop to run this software as shown below:
③ Modify the IP address. The default IP address of this camera is 192.168.226.201. Click the
information of the camera listed in the above table to show the network information on the
right hand. Modify the IP address and gateway of the camera and make sure its network
address is in the same local network segment as the computer’s. Please modify the IP address
of your device according to the practical situation.
For example, the IP address of your computer is 192.168.13.4. So the IP address of the camera
shall be changed to 192.168.13.X. After modification, please input the password of the
Page 3 IP CAMERA USER MANUAL
administrator and click “Modify” button to modify the setting.
④ Double click the IP address and then the system will pop up the IE browser to connect
IP-CAM. IE browser will auto download the Active X control. After downloading, a login
window will pop up as shown below.
Input the username and password to log in.
2.1.2 Directly Access through IE
The default network settings are as shown below:
IP address: 192.168.226.201
Subnet Mask: 255.255.255.0
Gateway: 192.168.226.1
HTTP: 80
Data port: 9008
You may use the above default settings when you log in the camera for the first time.
① Manually set the IP address of the PC and the network segment should be as the same as
the default settings of the IP camera. Open the network and share center. Click “Local Area
Connection” to pop up the following window.
The default password of the administrator is “123456”.
The default username is “admin”; the default password is “123456”.
Page 4 IP CAMERA USER MANUAL
Select “Property” and then select internet protocol according to the actual situation (for
example: IPV4). Next, click “Property” button to set the network of the PC.
② Open the IE browser and input the default address of IP-CAM and confirm. The IE
browser will download Active X control automatically.
③ After downloading Active X control, the login dialog box will pop up.
④ Input the default username and password and then enter to view.
2.2 WAN
Take access the camera by the router or virtual server for example
① Make sure the camera is well connected via LAN and then log in the camera via LAN and
go to the ConfigNetwork ConfigPort menu to set up the port number.
Page 5 IP CAMERA USER MANUAL
② Go to Config Network ConfigIP Address menu to modify the IP address.
③ Go to the router’s management interface through IE browser to forward the IP address and
port of the camera in the “Virtual Server”.
Port Setup IP Setup
Router Setup
④ Open the IE browser and input its WAN IP and http port to access.
Ce manuel convient aux modèles suivants
7
Table des matières
Autres manuels Provision ISR Caméra IP
Provision ISR
Provision ISR DAI-310IP04 Manuel utilisateur
Provision ISR
Provision ISR I1-390IPS36 Manuel utilisateur
Provision ISR
Provision ISR IP Series Manuel utilisateur
Provision ISR
Provision ISR DAI-310IPHEVF Manuel utilisateur
Provision ISR
Provision ISR BX-342IP5 Manuel utilisateur
Provision ISR
Provision ISR BX-390IP Manuel utilisateur
Provision ISR
Provision ISR PT-737 Instructions d'utilisation et d'entretien
Provision ISR
Provision ISR DAI-380IP04 Manuel utilisateur
