ProVideoInstruments VECOAX MICROMOD MS Manuel utilisateur

2014 Advanced model with also USB Recording and PLAY Capabilities,

1080P input over both mpeg2 and mpeg4 modes, low latency encoding

and the newest mpeg4 h264 US TV standard mode

VeCOAX

Micromod MS

Advanced Wall Mount HD Video Modulator

REFERENCE GUIDE

User Manual

Thank you for buying this VeCOAX Micromod.

Please read this manual carefully to install, use and maintain the VeCOAX Micromod in the best

conditions of performance. Keep this manual for future reference.

Directory

CHAPTER 1 Product Introductions..............................................................3

General Description......................................................................................3

Technical Specifications...............................................................................4

CHAPTER 2 Safety Instruction and Installations.........................................6

Safety Instructions........................................................................................6

Installations ..................................................................................................7

Chapter 3 Operations of TS Creator Software...........................................10

Installation..................................................................................................10

Operations of “Creator”..............................................................................11

File Management........................................................................................13

CHAPTER 4 Operations and Management...............................................14

Chapter 5 Operations of Record TS and Play TS through USB Disk........21

Appendix.....................................................................................................23

CHAPTER 1 Product Introductions

General Description

VECOAX MICROMOD is PROVIDEOINSTRUMENTS’s consumer electronics which allow audio/video

signal input in TV distributions and video recorded and playback through a USB port with applications

in home entertainment, hotel Digital Signage, shops etc.

It is an all-in-one device integrating MPEG2 HD/SD & MPEG4 AVC/H.264 HD/SD encoding and

modulating to convert video/audio signals to DIGITAL CABLE RF out.

The signals source could be from satellite receivers, closed-circuit television cameras, Blue-ray players,

and *.ts files created on PC with our TS Creator.exe. Its output signal is to be received by DIGITAL

CABLE TVs or DIGITAL CABLE STBs etc.

Control Buttons and LCD Window

DC 12V Power in

RF out

Composite Video Input via RCA (CVBS

Component Video Input via RCA (YPbPr

HDMI Input Left/Right Audio Input

USB Port for Video Record, Save,

Playback and System Upgrade

Technical Specifications

Encoding Section

HDMI

Video

Encoding MPEG-2, MPEG-4 AVC/H.264

Interface HDMI*1

Resolution

1920*1080_60P, 1920*1080_50P (for MPEG-4 AVC/H.264 only)

1920*1080_60i, 1920*1080_50i;

1280*720_60p, 1280*720_50P

Bit rate 1.000~19.000 Mbps

Audio

Encoding MPEG1 Layer II, MPEG2-AAC, MPEG4-AAC

Interface HDMI

Sample rate 48KHz

Bit rate 64, 96,128, 192, 256, 320, 384kbps

YPbPr/

CVBS

Video

Encoding MPEG-2, MPEG-4 AVC/H.264

Interface CVBS *1, YPbPr*1

Resolution

CVBS: 720x576_50i (PAL); 720x480_60i (NTSC)

YPbPr: 1920*1080_60i, 1920*1080_50i; 1280*720_60p,

1280*720_50P

Bit rate 1.000~19.000 Mbps

Audio

Encoding MPEG1 Layer II, MPEG2-AAC, MPEG4-AAC

Interface 1*Stereo /2 mono

Sample rate 48KHz

Bit rate 64, 96,128, 192, 256, 320, 384kbps

Modulator Section

Standard J.83A EUROPE J.83B USA J.83C JP

Constellation 16/32/64/128/256QAM 64/ 256QAM 64/ 256QAM

Bandwidth 8M 6M 6M

MER ≥43dB

RF frequency 30~960MHz, 1KHz step

RF output level -16~ -36dbm(71~91 dbµV), 0.1db step

Symbol rate 5000-9000 Ksps - ( 6900 EUROPE )

System

Management Local control: LCD + control buttons

Language English

LCN Insertion yes

General

Power supply DC 12V

Dimensions 144*238*52mm

Weight Approx 1kg

Operation temperature 0~45

℃

CHAPTER 2 Safety Instruction and Installations

Safety Instructions

WARNING: Hot plug is not allowed since it may cause system halted.

To prevent fire or electrical shock, do not expose the device to rain or moisture.

The VeCOAX Micromod is powered with a voltage of 12V DC. The power supply

voltage must not exceed the recommended voltage, which otherwise may cause

irreparable damage to the device and the invalidation of the warranty. Therefore:

Do not replace power supply with a voltage greater than 12V DC.

Do not connect the device to the power if the power cord is damaged.

Do not plug the device into mains supply until all cables have been connected

correctly.

Do not cut the cord.

Avoid placing the device next to central heating components and in areas of

high humidity.

Do not cover the device with elements that obstruct the ventilation slots.

If the VeCOAX Micromod has been kept in cold conditions for a long time, keep it in a

warm room minimum 2 hours before plugging into the mains.

Mount the device in vertical position with the connectors located on the top side.

When replacement parts are required, be sure the service technician has used

replacement parts specified by the manufacturer or have the same characteristics as

the original part. Unauthorized substitutes may result in fire, electric shock or other

hazards.

Safety check- Upon completion of any service or repairs to this device, ask the service

technician to perform safety checks to determine that the device is in proper condition.

Installations

RISK of damage to the unit

Mechanically handling the unit may result in damage. Do not connect the unit to the

power supply before or during assembly. Connect the unit as below instructed.

NO HOT PLUG AND

CONNECT THE CABLE AS

FOLLOWING STEPS.

1.Mount and tighten the screws and

plugs to secure the unit to the wall.

Left 10 cm of free space around from

each unit.

2.Connect the signal input in

the respective connectors.

The signal source can be

from a surveillance monitor,

DVD, set-top box, CCTV and

etc.

3.Optionally, connect the

loop-through RF input coaxial

cable.

4.Connect cable to RF output

to STB/TV.

5.Power supply connection:

a) Connect the earth

cable; b) Connect the

power plug to the unit

mains connector; c)

Connect the power plug

to the mains socket.

Cascade Installation

VECOAX MICROMOD unit has

1 TV signal to RF output

encoded as DIGITAL CABLE

Digital TV signal.

Several VECOAX MICROMOD

units can be cascaded in order

to increase the capacity. The

maximum capacity of a series of

N units is 1xN incorporated TV

signals. To cascade 2 or more

units, connect the RF output of

the preceding unit to the TV

input (loop-through) of the next

unit (see right illustration).

Chapter 3 Operations of TS Creator Software

VECOAX MICROMOD has a function to record and play TS video files created by any

Video Editing Software ( MPEG2 format for US TVs or MPEG / H264 Formats for

international TVs ). Users can also create *.ts files containing images, videos and

audios in a simple and intuitive way, and play them on a television through VECOAX

MICROMOD’s USB port using our CREATOR software.

File format supported include:

Image: JPG, PNG, BMP, GIF/Video: MP4, WMV, AVI, MPG, TS, MKV… /Audio: MP3,

WAV

Installation

Download our creator software from

www.provideoinstruments.com/tsc.zip

1. Download our “TS Creator” software package on your PC to get the installer and

its auxiliary routine.

2. Occasionally, if your PC hasn’t installed “Net Frame 2.0” yet, double-click

“NetFx20SP2_x86.exe” until complete the installation.

3. Double-click “Setup.exe” application to install the “Creator” and generate a

desktop shortcut.

Table des matières

Manuels Modulateur populaires d'autres marques

axing

axing AVM 5-00 Manuel utilisateur

IKUSI

IKUSI MAC-HOME HD Manuel utilisateur

Wisi

Wisi MINI OM 10 Manuel utilisateur

RCA

RCA CRF910 Manuel utilisateur

Pico Macom

Pico Macom PM45 Manuel utilisateur

FTE Maximal

FTE Maximal MODIG AIR Manuel utilisateur

Thor Broadcast

Thor Broadcast H-IP-32RF Manuel utilisateur

Delphi

Delphi SA10003 Manuel utilisateur

Elan

Elan MOD3000 Manuel utilisateur

ClearView

ClearView SD4260 Manuel utilisateur

Televes

Televes T.0X COFDM-QAM CI Manuel utilisateur

Crucial Audio

Crucial Audio Die Gotterdämmerung Manuel utilisateur

Pioneer

Pioneer CD-V61FM Manuel utilisateur

Televes

Televes 554912 Manuel utilisateur

Newtec

Newtec M6100 Manuel utilisateur

ProTelevision

ProTelevision PT 5780 Manuel utilisateur

Argent Cables

Argent Cables HD DVB-T MODULATOR Manuel utilisateur

SSS Siedle

SSS Siedle BVM 650-0 Manuel utilisateur