7
●The IQ™ (Input Quality) monitor provides feedback on the condition of your battery and connections. IQ
monitors the battery installed in the device and alerts the user if there is a problem with the battery or the
connections along the way. If you have a bad spring, this will cause the IQ value to drop. If you use a
poor quality battery, your input quality value will drop. A safe range is anything above 61. If you find your
battery is not showing higher than 61, replace the battery with a new high drain battery. These are
available on the ProVape website if you do not have a local source for them. The IQ value will vary a little
but generally if it’s 61 or above you are ok to use that battery. In addition to a value, the P3 will also tell
you if the battery is great, good, ok, poor or bad. These readings are often caused by a weak connection,
oxidation build-up where the spring is or a dirty contact pin. If you get a bad reading, try turning the spring
a few times. This will remove oxidation build-up and you should get a better reading. This is a very
sensitive and accurate reading so little changes can affect the value. Getting a low reading with a new
battery does not mean you have a bad device. It just means you might have some adjustments to make
on the spring or cleaning your contact pin. This numeric number is from 100 (best) to 0 (worst). If you get
a IQ warning the best fix is to remove the bottom cap, wiggle the spring a little, and try reinstalling the
bottom cap to see if that improves the IQ value. It's very normal for the IQ to bounce around. This is due
to the IQ reading being a real-time monitor of the internal resistance. The IQ value mainly comes into play
when you are vaping at above 15 watts. This is when we are most concerned about the quality of the
connections to ensure the device is safe to use at the higher power levels.
1) Great (81 to 100 inclusive)
2) Good (72 to 80 inclusive)
3) OK (61 to 71 inclusive)
4) Poor (36 to 60 inclusive) - Power limited to 15 watts when your input quality is poor or bad
5) Bad (0 to 35 inclusive) - Power limited to 15 watts when your input quality is poor or bad
●Left & Right handed mode allows the user to select which way the display reads. This cool new feature
allows the user to select if they want to flip the screen for left or right handed operation.
●Check All mode allows the user to see all their critical settings at a quick glance (adjustable settings).
The Check All feature shows an at-a-glance screen when you press the button once. This shows you the
remaining power left in the battery, the current selected mode (voltage or wattage) along with your current
power level. You will also get a resistance reading on the installed atomizer. If the atomizer is not installed
or there is a problem with the atomizer, you will get an OP reading meaning OPEN. The device does not
see the atomizer installed when this appears. Try changing out the coil or atomizer and try again. The
check all menu can be turned off and you can also adjust the amount of time it appears on your screen
every time you press the button once. See below for how to change these settings.
●Save profile - Save all of your favorite settings into 5 available memory slots for quick recall. The Save
and Recall option is a unique new feature which allows you to setup the device with your favorite settings
and then save them for easy recall later. While the device will always remember your settings, even when
changing batteries, the Save and Recall allows you to have lots of different settings for easy recall. Let’s
say you have a vanilla flavored fluid you like at 9 watts and you want the LED color to be white when
using this setup. You would simply setup the ProVari 3 with all these settings and then go into the menu
and select SAV to profile 1. Now let’s say you like cinnamon flavored fluid at 9.6 watts and want a red
LED. You would setup those parameters and then go to the SAV to profile 2 in the menu. Now that you
have two profiles saved, you can simply go to the recall menu and select which profile you want to load.
This will display all your preferred settings quickly.
●Scroll speed adjust allows the user to select the speed of the scrolling menu. The default scroll speed is
set to 2. Once you get used to the menu system, you will find that the default speed is too slow. When
you are ready to increase the speed at which the menu items go by, you can access the scroll speed
menu to change this speed. We recommend going to 3 and seeing how that works for you before turning
it all the way up to 5.
●The OLED brightness adjustment allows you to adjust the brightness of the display. Note that with
