PROTRON PLTV-37C Manuel utilisateur

} OMPLTV37C.book Page i Tuesday, May 24, 2005 9:50 AM

ore for your money

PLTV-37C

37" Liquid Crystal Display

User's Manual

Protron PLTV-37C Liquid Crystal Display User's Manual.

Under copyright law, this manual may not be reproduced in any form, in whole or in part,

without the prior written consent of Protron Digital Corporation.

Disclaimer

Protron Digital Corporation has reviewed this manual and provides it only as a guide to

operation. All statements, technical information, and recommendations in this manual and in

any guides or related documents are believed reliable, but the accuracy and completeness

thereof are not guaranteed or warranted, and they are not intended to be, nor should they be

understood to be, representations or warranties concerning the products described.

Specifications are subject to change without notice.

Trademarks

Protron is a registered trademark of Prosonic Group Corporation.

is a trademark of SRSLabs, Inc. WOW technology is incorporated under license from

SRSLabs, Inc.

_®

_'G_ is a trademark of BBE Sound, Inc. BBE technology is incorporated under license from BBE

Sound, Inc.

Protron Digital Corporation

2133 S.Green Privado

Ontario, CA 91761

Printed in China

PREVENTPOSSIBLEDANGER,ELECTRICSHOCK,ANDOTHERINJURIESWHEN

HANDLINGYOURDISPLAY,PLEASEBEAWAREOFOFALLWARNINGSANDSAFETY

PRECAUTIONSLISTEDBELOW.

Neverspillanyliquidof anykindonthedisplay.

Neverinsertanythingintothedisplay,whereobjectscancomeintocontactwith

highvoltagenodesordamageinternalcomponents.

Donotattempt to service the display yourself. Opening or removing covers

exposes high voltage nodes and other hazards. Refer all servicing to qualified

service personnel.

®Do not touch the display or antenna during thunderstorms. Unplug the display

during thunderstorms or if it will not be used for extended periods. Failure to

do so may result in electric shock or fire.

Before cleaning the display, unplug it from the wall. Use a damp cloth for

cleaning. Never use liquid or aerosol cleaners.

To prevent overheating and ensure reliable operation, place the display only in

a well ventilated location. Avoid cramped or inadequately ventilated locations.

Place the display at least 10 cm (4") from walls or other objects. Always keep the

vent clean. Never place the display upside down.

Note: Read all safety and operating instructions before operating your new display.

_cccccccccccccccccccccccccccccccccccccccc

Conformity and Compliance

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for aClass B digital device,

pursuant to Part 15 of the FCCRules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception (this can be

determined by turning the device off and on), the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment to an outlet on a circuit different from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Caution:

To comply with the limits for an FCCClass B computing device, the user should use the shielded

signal cable and power cord supplied with the unit. The FCCwarns that changes or modifications

of the unit not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

Radio Frequency Interference Statement

Warning:

This is a Class B product. In a domestic environment this product may cause radio interference, in

which case the user may be required to take adequate measures.

Canadian DOC Notice for Class B Computing Devices

This digital apparatus does not exceed the Class B limits for radio noise emissions from a digital

apparatus asset out in the Radio Interference Regulations of the Canadian Department of

Communications.

CE Marking and Declaration of Conformity

This device complies with the requirements of related European standards, which include the

following:

Emission: EN 55022, EN 61000-3-2, EN 61000-3-3

Immunity: EN 50082-1

Safety: EN 60950 Low-Voltage Directive (73/23/EEC)

Introduction..................................................................... 1

Features..................................................................... 1

UnpackingYourNewDisplay....................................................... 2

SettingUptheDisplay............................................................. 3

Connectingto aTVSignalSource................................................ 3

Connectingto CompositeVideoOutputDevices.................................... 4

Connectingto S-VideoOutputDevices............................................ 4

Connectingto ComponentVideoOutputDevices................................... 5

Connectingto aPeripheralAudioSystem.......................................... 5

Connectingto aVideoInputSystem.............................................. 6

Connectingto aPC............................................................ 6

OperatingtheDisplay............................................................. 8

TurningtheDisplayOnandOff.................................................. 8

SelectingtheVideoandAudioSource............................................ 8

AdjustingtheVolume.......................................................... 8

SelectingtheChannel.......................................................... 9

AccessingtheOn-ScreenDisplay................................................. 9

UsingYourDisplayforthe FirstTime................................................ 10

SettingupTelevisionChannels................................................. 10

UsingtheRemoteControl......................................................... 11

ConfiguringtheDisplay.......................................................... 13

TVParameters............................................................... 13

PCParameters............................................................... 14

AudioSettings............................................................... 15

Picture-In-Picture............................................................. 16

ChannelSettings............................................................. 18

ParentalControls............................................................. 19

GeneralSettings............................................................. 21

Troubleshooting................................................................ 24

SupportInformation.......................................................... 25

Specifications................................................................... 26

General.................................................................... 26

SupportedVGATimingModes.................................................. 27

LimitedWarranty................................................................ 28

000o0000

Congratulations on purchasing your new Protron 37" Liquid Crystal Display!

You can use your new display as a television, in a home theater system, or even as a computer

monitor. With component, composite, and S-Video video inputs, you can connect numerous

devices to your display, including DVD players, VCRs, HDTV receivers, video game systems,

camcorders, and so on. And with video and audio output, you can connect your display to a

home stereo system with a subwoofer, or even record what is displayed on the screen.

The progressive scan and interlaced component video inputs on your display give you the highest

quality video available, allowing you to view crystal-clear DVDs and HDTV. With a resolution of

1366 x 768, your display gives you plenty of high-resolution screen real estate when connected

to a computer.

Features

• 37" viewable display area

• Analog TV tuner with coaxial input

• Progressive scan component video input

• Interlaced component video input

• 3 composite video inputs

• S-Video input

• 6 audio inputs, one for each video input

• Composite video output

• Audio output with subwoofer output

• VGA and DVl computer video inputs

• 1/8" stereo audio input jack for computer audio

• 1366 x 768 pixel resolution

• Wide viewing angle

• Digital character smoothing

• Versatile, functional, and user-friendly On-Screen Display (OSD)

• VESA DPMS-compliant power saving--automatically turns off the display after a

configurable period of inactivity

• Windows 95198/2000/XP Plug and Play compliant

• Conforms to VESA standards and supports the DDC1 and DDC2B specifications.

Unpacking Your New Display

Before using your new display, you should unpack

the contents of the box and check to make sure

everything is present and undamaged.

To unpack the display:

1. Set the box upright near the intended display

location.

2. Open the top set of flaps.

3. Remove the styrofoam pad from the top of the

display.

4. Remove the accessories box from behind the

display and set it aside.

5. Lift the display out of the box and set it aside.

The accessories box should contain the items

indicated below. If any items are missing or

damaged, contact the seller immediately.

Power Cord VGA Cable

Remote Control _ \ PC Audio Cable

./Accessories Box

User's Manual

Coax-to-RCA //

Adapter

2 x AAA Battery

the Display

The display requires astable, level, and clean surface near a power outlet, 10 cm (4") away from

walls or other large objects. The rear ventilation grid should be unobstructed, and the display

should not be exposed to water or heat. Before setting up the display, prepare such a space.

To set up the display:

1. Remove the protective plastic bag and plastic screen protector from

the display.

2. Remove the power cord from the accessories box, insert the

appropriate end into the power (AC IN) connector on the bottom of

the display, and then insert the other end into a free power outlet.

3. Turn on the power switch on the bottom of the display.

Connecting to a TV Signal Source

A TV signal may come from a cable box, satellite receiver,

antenna, or similar device.

To connect a TV signal source to the display:

1. Remove the coax-to-RCA adapter from the Accessories Box

and insert it into the antenna (ANT) jack on the bottom of

the display.

2. Connect a coax cable between the adapter and TV signal

source (for example, a cable box, satellite receiver

Note: If you would like to be able to record

the TV signal with a VCR, DVD

recorder, or similar device, connect

the TV signal source to the input of

the recording device with one cable,

then connect the output of the

recording device to the ANT jack on

the display with another cable.

or antenna).

Setting Up the Display

Connecting to Composite Video Output Devices

Many video devices, such as VCRs, DVD players,

video game systems, and camcorders, have

composite video outputs. Composite video uses

one RCA cable to transmit video information and

generally provides lower quality than S-Video

and component video (see below).

To connect a composite video source to the

display:

1. Using an RCA cable, connect the composite

video output (yellow) on the source device to

the corresponding jack in one of the three

composite video blocks on the display

(AV 1 IN, AV 2 IN, or AV 3 IN).

Using two RCA cables, connect the right (red)

and left (white) audio outputs on the source

to the corresponding jacks in the same

composite video block used above.

Connecting to S-Video Output Devices

Many video devices that have composite video outputs also have S-Video outputs. S-Video uses a

single four-wire cable to transmit video information. Two of the wires are used to transmit video.

Because it splits the video signal into two components, S-Video generally provides higher quality

than composite video, but lower quality than component video (see below).

Note: The pins used in S-Video connectors are

somewhat fragile. Take care to avoid

bending the pins, as a bent or broken pin

can cause loss of color information or

total signal loss.

To connect an S-Video source to the display:

1. Using an S-Video cable, connect the S-Video

output on the source device to the S-Video

jack on the display.

2. Using two RCA cables, connect the right (red)

and left (white) audio outputs on the source

to the corresponding jacks in the S-Video

block on the display.

i S_VmDEO OUT

Autres manuels pour PLTV-37C

Table des matières

Autres manuels PROTRON Moniteur

PROTRON

PROTRON PLTV-26M Manuel utilisateur

PROTRON

PROTRON PLTV-26M Manuel utilisateur

PROTRON

PROTRON PLTV-37C Manuel utilisateur

PROTRON

PROTRON PLTV-3250 Manuel utilisateur

PROTRON

PROTRON PLTV-26CM Manuel utilisateur

PROTRON

PROTRON PLTV-32C Manuel utilisateur

PROTRON

PROTRON PLTV-3250 Manuel utilisateur

PROTRON

PROTRON PLTV-4250 Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation