ProSoft MVI56E-AFC Manuel utilisateur

MVI56E-AFC

Enhanced Liquid and Gas Flow

Computer for ControlLogix®

v4.04

October 2, 2018

SETUP AND CONFIGURATION GUIDE

Your Feedback Please

We always want you to feel that you made the right decision to use our products. If you have suggestions, comments,

compliments or complaints about our products, documentation, or support, please write or call us.

ProSoft Technology, Inc.

+1 (661) 716-5100

+1 (661) 716-5101 (Fax)

www.prosoft-technology.com

[email protected]

October 2, 2018

ProSoft Technology®, is a registered copyright of ProSoft Technology, Inc. All other brand or product names are or

may be trademarks of, and are used to identify products and services of, their respective owners.

In an effort to conserve paper, ProSoft Technology no longer includes printed manuals with our product shipments.

User Manuals, Datasheets, Sample Ladder Files, and Configuration Files are available at:

www.prosoft-technology.com

For professional users in the European Union

If you wish to discard electrical and electronic equipment (EEE), please contact your dealer or supplier

for further information.

Warning –Cancer and Reproductive Harm –www.P65Warnings.ca.gov

Important Installation Instructions

Power, Input, and Output (I/O) wiring must be in accordance with Class I, Division 2 wiring methods, Article 501 to 4

(b) of the National Electrical Code, NFPA 70 for installation in the U.S., or as specified in Section 18-1J2 of the

Canadian Electrical Code for installations in Canada, and in accordance with the authority having jurisdiction. The

following warnings must be heeded:

WARNING - EXPLOSION HAZARD - SUBSTITUTION OF COMPONENTS MAY IMPAIR SUITABILITY FOR CLASS

I, DIV. 2.

WARNING - EXPLOSION HAZARD - WHEN IN HAZARDOUS LOCATIONS, TURN OFF POWER BEFORE

REPLACING OR WIRING MODULES.

WARNING - EXPLOSION HAZARD - DO NOT DISCONNECT EQUIPMENT UNLESS POWER HAS BEEN

SWITCHED OFF OR THE AREA IS KNOWN TO BE NON-HAZARDOUS.

Class 2

MVI (Multi Vendor Interface) Modules

WARNING - EXPLOSION HAZARD - DO NOT DISCONNECT EQUIPMENT UNLESS POWER HAS BEEN

SWITCHED OFF OR THE AREA IS KNOWN TO BE NON-HAZARDOUS.

AVERTISSEMENT - RISQUE D'EXPLOSION - AVANT DE DÉCONNECTER L'ÉQUIPEMENT, COUPER LE

COURANT OU S'ASSURER QUE L'EMPLACEMENT EST DÉSIGNÉ NON DANGEREUX.

Warnings

North America Warnings

Power, Input, and Output (I/O) wiring must be in accordance with Class I, Division 2 wiring methods, Article 501 to 4

(b) of the National Electrical Code, NFPA 70 for installation in the U.S., or as specified in Section 18-1J2 of the

Canadian Electrical Code for installations in Canada, and in accordance with the authority having jurisdiction. The

following warnings must be heeded:

A Warning - Explosion Hazard - Substitution of components may impair suitability for Class I, Division 2.

B Warning - Explosion Hazard - When in hazardous locations, turn off power before replacing or rewiring modules.

C Warning - Explosion Hazard - Do not disconnect equipment unless power has been switched off or the area is

known to be non-hazardous.

Avertissement - Risque d'explosion - Avant de déconnecter l'équipement, couper le courant ou s'assurer que

l'emplacement est désigné non dangereux.

D Suitable for use in Class I, Division 2 Groups A, B, C and D Hazardous Locations or Non-Hazardous Locations.

ATEX Warnings and Conditions of Safe Usage

Power, Input, and Output (I/O) wiring must be in accordance with the authority having jurisdiction.

A Warning - Explosion Hazard - When in hazardous locations, turn off power before replacing or wiring modules.

B Warning - Explosion Hazard - Do not disconnect equipment unless power has been switched off or the area is

known to be non-hazardous.

C These products are intended to be mounted in an IP54 enclosure. The devices shall provide external means to

prevent the rated voltage being exceeded by transient disturbances of more than 40%. This device must be used

only with ATEX certified backplanes.

D DO NOT OPEN WHEN ENERGIZED.

Battery Life Advisory

The MVI46, MVI56, MVI56E, MVI69, and MVI71 modules use a rechargeable Lithium Vanadium Pentoxide battery to

back up the real-time clock and CMOS. The battery should last for the life of the module. The module must be

powered for approximately twenty hours before the battery becomes fully charged. After it is fully charged, the battery

provides backup power for the CMOS setup and the real-time clock for approximately 21 days. When the battery is

fully discharged, the module will revert to the default BIOS and clock settings.

Note: The battery is not user replaceable.

Electrical Ratings

Backplane Current Load: 800 mA @ 5.1 Vdc; 3 mA @ 24 Vdc

Operating Temperature: 0°C to 60°C (32°F to 140°F)

Storage Temperature: -40°C to 85°C (-40°F to 185°F)

Shock: 30 g, operational; 50 g, non-operational; Vibration: 5 g from 10 Hz to 150 Hz

Relative Humidity: 5% to 95% with no condensation

All phase conductor sizes must be at least 1.3 mm(squared) and all earth ground conductors must be at least

4mm(squared).

Agency Approvals and Certifications

Please visit our website: www.prosoft-technology.com

Contents MVI56E-AFC ♦ Version 4.04

Page 4 of 149 ProSoft Technology, Inc.

October 2, 2018

Contents

Your Feedback Please ........................................................................................................2

Important Installation Instructions........................................................................................2

MVI (Multi Vendor Interface) Modules.................................................................................2

Warnings..............................................................................................................................3

Battery Life Advisory............................................................................................................3

1Before You Begin..................................................................................... 9

Pre-Configuration Processes.....................................................................................9

Pre-Configuration Requirements.............................................................................10

Downloading EAFC Manager.............................................................................10

Downloading AOIs to your system .....................................................................11

Locating information for your meter type.................................................................12

Configuration Aids....................................................................................................14

Using the Modbus Dictionary...................................................................................16

Procedure ...........................................................................................................18

2Creating an EAFC Manager Project...................................................... 21

Starting EAFC Manager...........................................................................................21

3Configuring Site Parameters................................................................. 23

Accessing Site Configuration Parameters...............................................................23

Configuring Site Options.....................................................................................26

Configuring Pass-thru Options ...........................................................................27

Viewing Site Configuration Status ...........................................................................27

UDT Tag Prefix........................................................................................................28

Exporting UDT Files............................................................................................29

Setting Communication Parameters........................................................................31

Configuring Modbus TCP/IP...............................................................................33

Setting Whitelist Options..........................................................................................37

Advanced Tab.....................................................................................................38

Configuring Serial 1 and Serial 2........................................................................40

Poll Button................................................................................................................44

Local Port Settings Dialog Box................................................................................44

Read Button.............................................................................................................45

Write Button.............................................................................................................45

Special Wnd Button .................................................................................................45

Done Button.............................................................................................................46

Remapping Button...................................................................................................46

Accessing the Data..................................................................................................46

Site Status................................................................................................................46

4Configuring Meter Parameters.............................................................. 47

Prerequisites............................................................................................................47

MVI56E-AFC ♦ Version 4.04 Contents

ProSoft Technology, Inc. Page 5 of 149

October 2, 2018

What Parameters Do I Have to Configure?.............................................................47

Configuring Meter and Stream Identification Parameters .......................................48

Setting End of Period Parameters......................................................................49

Setting a Stream Name ......................................................................................51

Configuring Meter Type, Product Group, Units, and Primary Input.........................52

Selecting and Configuring Meter Type, Product Group, Units and Primary Input

Parameters..............................................................................................................53

Product Group ....................................................................................................55

System of Units...................................................................................................55

5Configuring Common Parameters.........................................................57

Selecting the Physical Device..................................................................................58

Specifying Reference Temperature and Pressure (Reference Conditions) ............60

Setting Accumulators and Flow Rates.....................................................................61

Flow Rate Period Unit.........................................................................................61

Flow Rate Unit ....................................................................................................61

Accumulation Unit...............................................................................................62

Accumulator Rollover..........................................................................................62

Configuring Process Input Scaling...........................................................................63

Zero Scale ..........................................................................................................63

Full Scale............................................................................................................63

Enabling/Disabling the Meter (Control Opts)...........................................................64

Backplane Return ....................................................................................................64

Process Inputs....................................................................................................64

Component Analysis Function Block..................................................................64

Configuring Calculation Options..............................................................................66

Configuring Resettable Accumulators .....................................................................67

Non-Resettable Accumulators............................................................................68

Resettable Accumulators....................................................................................69

Net Accumulator Calculation ..............................................................................74

Accumulator Totalizer and Residue....................................................................75

Meter Factors...........................................................................................................75

Meter Alarm Control Options ...................................................................................76

Setting Stream Options and Enabling/Disabling Meters .........................................78

Contents MVI56E-AFC ♦ Version 4.04

Page 6 of 149 ProSoft Technology, Inc.

October 2, 2018

6Configuring Differential Meter Parameters........................................... 81

7Configuring Linear Meter Pulse Count Options................................... 85

8Configuring Linear Meter Pulse Frequency Options........................... 87

9Configuring Gas Parameters................................................................. 88

10 Configuring Liquid Parameters............................................................. 91

11 Configuring Density Units..................................................................... 95

12 Configuring Primary Input Characteristics .......................................... 96

13 Configuring K-factor Characteristics.................................................... 97

14 Configuring Meter Factors................................................................... 101

15 Installing the Module in the Rack........................................................ 105

Module Initialization ...............................................................................................105

16 Connecting the MVI56E-AFC to the EAFC Manager .......................... 107

17 Downloading the Project to the MVI56E-AFC..................................... 111

18 Creating a RSLogix Project and Importing an AOI ............................ 113

Create an RSLogix Project ....................................................................................113

Importing the AOI Rungs .......................................................................................116

Configuring the AOIs .............................................................................................121

19 Using the MVI56E-AFC Web Page....................................................... 123

Firmware Upgrade Link .........................................................................................124

Component Integrity Link.......................................................................................125

Software Component Detail Information...........................................................126

Component Integrity Page Operation...............................................................127

Verification........................................................................................................128

Monitor...................................................................................................................128

Site Configuration .............................................................................................130

MVI56E-AFC ♦ Version 4.04 Contents

ProSoft Technology, Inc. Page 7 of 149

October 2, 2018

Meter Configuration..........................................................................................133

Stream Configuration........................................................................................135

Meter Calculations............................................................................................136

Meter Accumulators..........................................................................................138

Meter Status .....................................................................................................139

Data Displays....................................................................................................141

20 What’s Next?.........................................................................................143

21 Support, Service and Warranty............................................................145

Contacting Technical Support................................................................................145

Warranty Information .............................................................................................147

22 Index......................................................................................................149

Contents MVI56E-AFC ♦ Version 4.04

Page 8 of 149 ProSoft Technology, Inc.

October 2, 2018

MVI56E-AFC ♦ Version 4.04 Before you Begin

ProSoft Technology, Inc. Page 9 of 149

October 2, 2018

1 Before You Begin

Pre-Configuration Processes

This section describes the pre-configuration process. There are a small number

of tasks to complete before configuring your MVI56E-AFC project.

The following flow illustrates the full configuration process.

Before you Begin MVI56E-AFC ♦ Version 4.04

Page 10 of 149 ProSoft Technology, Inc.

October 2, 2018

Pre-Configuration Requirements

Before you start to configure the MVI56E-AFC, you must:

Download EAFC Manager software

Download the MVI56E-AFC Add-On Instructions (AOIs)

Downloading EAFC Manager

The EAFC Manager can be downloaded from the ProSoft Technology website.

1 Navigate to the MVI56E-AFC webpage found here.

2 Click on the DOWNLOADS tab.

3 Click on the PROSOFT EAFC MANAGER link and follow the prompts to

download and install the application.

Note: Leave this page open. You will also be downloading AOIs from this page as described in the

next section.

Autres manuels pour MVI56E-AFC

Table des matières

Manuels Ordinateur de bureau populaires d'autres marques

HP m9060n - Pavilion - Elite Fiche technique

Asus

Asus E210 Series Manuel utilisateur

Dell

Dell Inspiron 600m Manuel utilisateur

Dell

Dell Inspiron 3662 Manuel utilisateur

TotalFlow

TotalFlow uFLO Manuel utilisateur

HP Presario SV7000 - Desktop PC Manuel utilisateur

HP ProDesk 400 G5 Manuel

Logitech

Logitech MK320 Manuel utilisateur

Dell

Dell XPS 730 H2C Manuel utilisateur

Sony

Sony Vaio Series Manuel utilisateur

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manuel utilisateur

Alto

Alto MD 250 Manuel utilisateur

Lenovo

Lenovo ThinkCentre Edge 72 Manuel

Lenovo

Lenovo ThinkStation D20 Manuel

Arbor Technology

Arbor Technology FPC-7800 Series Manuel utilisateur

Sony

Sony VAIO VGX-TP1 Series Manuel utilisateur

Asus

Asus Eee Box B204 Manuel utilisateur

Dell

Dell Optiplex 9010 All In One Manuel utilisateur