Prorack PR3075 Manuel utilisateur

Page 1 of 2

09-13-502-Rev5

Ratchet Grabs

Kit Contents

Item Component Qty

1 Ratchet Assembly 1

2 M6 Sliding Nut 2

3 M6 Spring Washer 2

4 Ball End Allen Key 4 mm 1

5 M6 Capscrew Button Head 16 mm 2

6 M6 Washer 2

7 M6 Capscrew Button Head 20 mm 2

8 M6 Spring Nut 2

9 Hook And Strap Assembly 1

First Time Installation

• Please read instructions carefully before installation.

• Check the contents of kit. Contact your Prorack dealer if any parts appear to be missing or damaged.

• Clean your roof racks prior to ﬁtting the Ratchet Grabs.

Important Warning

• It is critical that all Prorack racks and accessories be properly and securely attached to your vehicle. Improper

attachment could result in an automobile accident, and could cause serious bodily injury or death to you or to others.

• You are responsible for securing the racks and accessories to your car, checking the attachments prior to use, and

periodically inspecting the products for adjustment, wear, and damage.

• If you do not understand all of the instructions and cautions, or if you have no mechanical experience and are not

thoroughly familiar with the installation procedures, you should have the product installed by a professional installer

such as a roof rack specialist.

PR3075

Installation with Prorack HD, Tradesman and other Heavy Duty Crossbars

Place 2x M6 Spring Nuts into crossbar channel.

Position where you want the accessory to be.

Push down and twist Spring Nut to lock into place.

12Fasten Ratchet assembly onto the crossbar using 2x

M6 Capscrews 20 mm, 2x M6 Spring Washers, and

2x M6 Flat Washers.

Tighten all screws to 5 Nm

using the 4 mm Allen Key.

2 3

Page 2 of 2

09-13-502-Rev5

Installation with Prorack S-wing and international T-slot crossbars

Push down rubber inﬁll and slide 2x M6 Sliding

Nuts into crossbar channel. Position where you

want the accessory to be.

12Fasten Ratchet assembly onto crossbar using 2x

M6 Capscrews 16 mm, 2x M6 Spring Washers, and

2x M6 Flat Washers.

Tighten all screws to 5 Nm using the 4 mm Allen

Key.

Using The Strap

To attach Strap, thread it through the slot in the Ratchet barrel.

2To wind Strap, work the Ratchet Handle back and forth.

3To release Strap, open Ratchet handle completely and pull Strap.

Recommendations

• Check accessory is securely attached whenever you reﬁt it to the vehicle. If the unit feels loose, refer to the ﬁtting

instructions and readjust.

• Regularly check all fasteners. This includes all attached accessories and roof racks.

• Ensure that all loads are distributed evenly across the roof racks and are fastened securely.

Caution

• A loaded roof rack system can alter the performance of your vehicle. Be especially aware of the effects of side winds,

changing of direction, and braking performance. Avoid rapid acceleration and deceleration. Drive Carefully.

• Make sure all loads are securely fastened with non-elastic straps. Check regularly during longer journeys.

• Never drive into a car wash with a roof rack system or accessories ﬁtted.

• Do not exceed the vehicle manufacturer’s roof load rating. Total load equals weight of roof racks + accessories + cargo/

equipment.

Prorack

17 Hinkler Court, Brendale

QLD 4500, Australia

Freephone

AU: 1800 143 548 www.prorack.com.au

NZ: 0800 4776 722 www.prorack.co.nz

Autres manuels pour PR3075

Autres manuels Prorack Accessoires automobiles

Prorack

Prorack K049 Manuel utilisateur

Prorack

Prorack Whispbar S43 Manuel utilisateur

Prorack

Prorack K156 Manuel utilisateur

Prorack

Prorack K629 Manuel utilisateur

Prorack

Prorack K383 Manuel utilisateur

Prorack

Prorack K646 Manuel utilisateur

Prorack

Prorack K727 Manuel utilisateur

Prorack

Prorack K416 Manuel d'utilisation et d'installation

Prorack

Prorack K671 Manuel utilisateur

Prorack

Prorack K164 Manuel utilisateur

Prorack

Prorack K053 Manuel utilisateur

Prorack

Prorack K010 Manuel utilisateur

Prorack

Prorack K602 Manuel utilisateur

Prorack

Prorack K578 Manuel utilisateur

Prorack

Prorack Q19 Manuel utilisateur

Prorack

Prorack K431 Manuel utilisateur

Prorack

Prorack K997 Manuel utilisateur

Prorack

Prorack K453 Manuel utilisateur

Prorack

Prorack K595 Manuel utilisateur

Prorack

Prorack K934 Manuel d'utilisation et d'installation

Prorack

Prorack K457 Manuel d'utilisation et d'installation

Prorack

Prorack K403 Manuel d'utilisation et d'installation

Prorack

Prorack K1234 Manuel utilisateur

Prorack

Prorack K470 Manuel utilisateur

Manuels Accessoires automobiles populaires d'autres marques

James Baroud

James Baroud Odyssey Manuel utilisateur

Motorola

Motorola i50sx Manuel utilisateur

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manuel utilisateur

Feniex

Feniex T3 Manuel utilisateur

Renault

Renault 77 11 423 180 Manuel utilisateur

Kia

Kia E8300-4D000 Manuel utilisateur

Brink

Brink 756843 Manuel utilisateur

Whispbar

Whispbar K085W Manuel utilisateur

v.link

v.link CI-VL2-PC-HSD Manuel utilisateur

Viking

Viking Stack-Rack Guide de configuration rapide

Aries

Aries 203015 Manuel utilisateur

Choetech

Choetech AT0005 Manuel utilisateur

ZZ2

ZZ2 ZZAIR-PRO Manuel utilisateur

Holman

Holman 4A80L Manuel utilisateur

Thule

Thule 2075 Manuel utilisateur

Motorola

Motorola T325 Manuel utilisateur

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guide d'installation

DV8

DV8 FBJL-02 Manuel utilisateur