hazardous vapors. These vapors can irritate the respiratory track. Always
ensure proper ventilation and immediately consult a doctor, if you feel unwell.
4. Even a discharged battery may still carry a charge. To prevent a shock, place
battery terminal caps or covers over the terminal to prevent accidental contact.
5. Leaking battery fluid can cause irritation of the skin or burns. If contact should
occur, flush immediately with water. In case of accidental contact with the
eyes, seek medical aid.
6. Do not disconnect from the power source in place of using the ON/OFF switch
on the tool. This can lead to an accidental startup when the tool is connected
to the power supply.
7. Do not allow a rechargeable battery to fully discharge. This will damage the
battery. Recharge the battery as soon as possible.
8. Do not store the battery completely discharged. Charge it fully before storing.
Recharge occasionally if storing for a long time.
ELECTRICAL SAFETY
WARNING! Do not touch or handle a live tool with any part of your
body that is wet or damp. Wet skin reduces resistance to electrical
current, increasing the danger of a serious or fatal shock.
1. Do not alter any parts of the tool or accessories. All parts and accessories are
designed with built-in safety features that may be compromised if altered.
2. Protect yourself against electric shocks when working on electrical equipment.
Avoid body contact with grounded surfaces. There is an increased chance of
electrical shock if your body is grounded.
3. Do not expose the soldering gun to rain, snow, frost or any other damp or wet
conditions. Water entering a tool will increase the risk of electric shock.
4. A polarized plug has two blades of different widths, allowing only one way to
insert the plug into the outlet. If the outlet does not accept a polarized plug,
contact a qualified electrician to install a polarized outlet. Do not alter the plug,
as this may compromise the built-in safety feature.
POWER ADAPTER
1. Only use the power adapter supplied with this tool. Other power adapters may
not match the tool’s power requirements and can damage it or cause a fire or
electrical hazard.
2. Connect the power adapter directly to the power supply whenever possible.
Use extension cords or surge protectors only when the adapter’s cord cannot
reach a power supply from the work area.
a. Ensure the adapter is fully seated in the outlet. Do not use an outlet that
is loose or cannot properly hold the adapter blades.
3. Do not operate this tool if the power adapter’s cord is frayed or damaged, as
an electric shock or surge may occur, resulting in a personal injury or property
damage.
V1.0 CORDLESS PISTOL-GRIP SOLDERING GUN KIT 9118001
Page 5 www.princessauto.com / 1-800-665-8685
