8662280 1,000 LB HYDRAULIC RAPIDLIFT TABLE CART V1.0
8 For technical questions call 1-800-665-8685
2.1 To lift the table, press the foot pedal repeatedly while
the control lever is in the release position.
2.2 To lower the table, squeeze the control lever. The
control lever has a two-speed valve. Squeeze it halfway
to lower the table slowly; Squeeze it fully to lower the
table rapidly.
3. Secure the table with the safety bars (F) when the table is
lifted. Lift the table until the desired height is reached and
move the safety bars toward the handle. Lower the table
until the bars lock in place. To release the bars, lift the table
until the bars disengage. Move the bars away from the
handle and into their original position.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is
efficient, easier to control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace
damaged or worn components. Only use identical
replacement parts when servicing.
3. Keep the tool handles clean, dry and free from oil/grease at
all times.
4. Lubricate each friction point monthly with good,
quality grease.
5. Maintain the tool’s labels and name plates. These carry
important information. If unreadable or missing, contact
Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the
tool. An improperly repaired tool may present a hazard to the
user and/or others.
PUMP MAINTENANCE
If the pump is not functioning properly, you may need the
bleed air from the hydraulic system or change the hydraulic oil.
