8819864 Solar Auto-Darkening Welding Helmet V1.0
With Blue Lens Technology
10 For technical questions call 1-800-665-8685
SENSITIVITY
Press the sensitivity button (B) twice to activate the selection.
The top sensitivity bar will flash to indicate the highest sensitivity
is selected. Continue to press the sensitivity button to scroll
through settings 1 to 5 (least to most sensitive).
1. Low Setting - suitable for high amperage welding and
welding in areas with high levels of natural sunlight.
2. Medium Setting - suitable for most indoors and outdoors
welding.
3. High Setting - suitable for low amperage welding and
welding in areas with low light conditions, especially for
low amperage argon-arc welding.
GRINDING MODE
You can also use the welding helmet to protect your face during
grinding. This will prevent the filter cartridge from darkening
when bright sparks are created.
Press the weld/grind button (C) twice to activate, then hold the
down until Shade number 4 appears in the LCD. The grinding
icon (I) will appear on the LCD and the weld/grind button LED
will flash red to confirm grind mode is set. You cannot adjust the
shade number and memory save/retrieve functions grind mode.
MEMORY SETTING
Press the memory button (F) and the identical number icon (M,
N, O) will appear. Hold the memory button until it stops
flashing to store the current settings. Existing saved settings
can be overwritten by the same process.
Press a memory button once to retrieve and use the saved setting.
Press any button on the left side to ignore the memory settings.
The general settings are stored when the helmet is shut off. The
general settings remain when the helmet is turned on. These
settings are lost if a saved setting is used.
