7
28. PITCH BEND-/ +-Taste
Sie können mit diesen beiden Pitch Bend Tasten, die Tonhöhe und das Tempo der Musik
verändern.
29. PITCH-Taste
Sie Aktiviert oder deaktiviert den Pitch Fader. Sie können diese auch gedrückt halten, und
die PITCH BEND - / + Tasten drücken, um die Reichweite des PITCH FADER (± 4%, 8%
bzw. 16%) einzustellen. Der aktuelle Bereich wird auf dem LCD Display und durch
verschiedene LED-Farben angezeigt.
30. LED-Pitch
Dieser wird verwendet, um die verschiedenen Pitch-Bereiche anzuzeigen.
31. TAP-Taste
Drücken Sie diese Taste im Rhythmus der Musik. Das Display (16) zeigt die Beats per
Minute (BPM) an.
32. PROG-Taste
Sie können mehrere Tracks (20 Tracks max.) programmieren: - Drücken Sie die PROG-
Taste, um in den Programm-Modus zu gelangen. - Verwenden Sie die Titelsprung-Tasten,
um den gewünschten Track zu hören dann drücken Sie die PROG Taste um diesen
anzuwählen. Verwenden Sie ein weiteres Mal die Titelsprung-Tasten, um den gewünschten
Track zu hören, drücken Sie dann die Auswahl PROG-Taste zur Bestätigung Ihrer Wahl. -
Wiederholen Sie den Vorgang, um alle gewünschten Titel anzuhören. - Drücken Sie die
Taste PLAY / PAUSE, um die Wiedergabe zu starten.
Technische Daten
Anti-Shock Speicher: 20 Sekunden
Einstellbereiche: +/-4%, 8% ,16%
Stromversorgung: AC 100-240V~50/60Hz
Leistungsaufnahme: 20W max.
Medienformate: CD, CD-R, MP3-CD, USB, SD, SDHC
Ausgangsspannung: 1 VRMS / 10 kOhm
Übertragungsbereich: 20-20000 Hz
Max Speicherkartengrösse HD: 320 G
Abmessungen: L290 x B226 x H300 [mm]
Gewicht: 2 Kg
Power supply / power cord (devices with power cords/power supplies):
• Only use the voltage specified as correct for the device. The required voltage is printed on the type plate of the device.
Check the power cable from time to time regarding dirt, damage or other influence.
• Use only the included power cord / power supply or adaptor. Do not place the power chord near heat sources such as
heaters or radiators, and do not excessively bend or otherwise damage the cord, place heavy objects on it, or place it in
a position where anyone could walk on, trip over, or roll anything over it.
• Remove the electric plug from the outlet when the device is not to be used for extended periods of time, or during
electrical storms. When removing the electric plug from the device or an outlet, always hold the plug itself and not
the cord. Pulling by the cord can damage it.
• To avoid generating unwanted noise, make sure there is adequate distance (50 cm or more) between the AC power
adaptor and the device. Do not cover or wrap the AC power adaptor with a cloth or blanket.
Batteries / safety instructions (devices with batteries):
• Use only high quality batteries – do not mix batteries with rechargeable accumulators
• Do not try to recharge non-rechargable batteries
• Keep attention to the polarity when changing the batteries (polarity is signed on the device)
• Do not cause an electrical short at the batteries, do not open the batteries
• Changing of batteries must not be done by children, do not let children play with batteries
• Remove batteries from the device when the dDevice is not in use for a longer period
• Batteries are special waste, do not dispose them with the domestic waste
Location:
• When setting up the device, make sure that the AC outlet you are using is easily accessible. If some trouble or
malfunction occurs, immediately turn off the power switch and disconnect the plug from the outlet. Even when the power
switch is turned off, electricity is still flowing to the product all the minimum level. When you are not using the product
for a long time, make sure to unplug the power cord from the wall AC outlet.
• Inadequate ventilation can result in overheating, possibly causing damage to the device(s), or even fire.
• Do not expose the device to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a
heater, or in a car during the day) to prevent the possibility of panel disfiguration or damage to the internal components.
• Do not place the device in an unstable position where it might accidentally fall over.
• Do not block the vents. This device has ventilation holes at the bottom/rear to prevent the internal temperature
from becoming too high. In particular, do not place the device on its side or upside down. Inadequate ventilation
can result in overheating, possibly causing damage to the device(s), or even fire.
• Do not use the device in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices.
Doing so may result in noise, both in the device itself and in the TV or radio next to it.
Connections and handling:
• Before connecting the device to other devices, turn off the power for all devices. Before turning the power on or off
for all devices, set all volume levels to minimum. • Do not use the device or headphones for a long period of time at
a high or uncomfortable volume level, since this can cause permanent hearing loss. If you experience any hearing loss
or ringing in the ears, consult a physician.
• Do not rest your weight on the device or place heavy objects on it, and avoid use excessive force on the buttons,
switches or connectors
Do not open:
• Do not open the device or attempt to disassemble the internal parts or modify them in any way. The device contains no
user-servicable parts. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by
qualified service personnel.
