Prominence Home 51428 Manuel utilisateur

Questions, problems or missing parts? Before returning this item to your retailer, call our customer service department

at 1-877-706-3267, Monday - Thursday, 8am - 6pm, Friday, 8am - 5pm EST.

MODELS #51428, 51429

52-INCH HUGGER FAN

PACKAGE CONTENTS HARDWARE CONTENTS

(not drawn to scale)

Note: Some extra fasteners are included for your

convenience.

Blade Balancing Kit

Plug Button

Blade Washer (x 15)

Blade Screw (x 15)

Wire Connector (x 3)

Pull Chain Extension (x 2)

Mounting Bracket

Blade Arm (x 5)

Blade (x 5)

Lower Bracket

Bulb

Motor

Motor Housing

Switch Housing

Switch

Housing

Cap

Light Kit

Glass Bowl

TABLE OF CONTENTS

PREPARATION

Before beginning the assembly of this product, ensure all parts are present. Compare all parts with the package contents list and hardware contents

list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 120 minutes

Tools required for assembly (not included): Electrical tape, Phillips Screwdriver, Pliers, Safety Glasses, Step Ladder, and Wire Strippers

Helpful Tools (not included): AC Tester Light, Tape Measure, Wiring Handbook and Wire Cutters

Package Contents .....................................................................................................2

Preparation ..........................................................................................................3

Assembly Instructions ..................................................................................................5

Installation Without Light Kit .............................................................................................9

Operating Instructions .................................................................................................10

Safety Information ....................................................................................................11

Care and Maintenance ................................................................................................11

Troubleshooting......................................................................................................12

Warranty ...........................................................................................................13

Replacement Parts List ................................................................................................14

PREPARATION

1. Turn o󰀨 power.

Turn o󰀨 the power to the fan at the breaker

box and the wall switch.

2. Choose mounting option.

Standard Mounting installation is not

available for this item.

Angle Mounting installation is not available

for this item.

Flushmount installation is best suited for

ceilings 8 ft. or lower.

Closemount installation is not available for

this item.

3. Choose suitable location.

Ensure the blades will be at least 30 inches

from any obstructions. Also check the

downrod length to ensure the blades will be

at least 7 feet above the oor.

Failure to disconnect the power supply

prior to installation may result in serious

injury or death.

See page 11 for complete description of

cautions and warnings.

Downrod Mounting

Flushmount Closemount

Angle Mounting

ASSEMBLY INSTRUCTIONS

Lower

Bracket

Screw

Mounting

Bracket

Hook Slots

Lower

Bracket

Mounting

Bracket

Screws

2. Attach the lower bracket.

Note: Remove the wire restraint from the

wires on top of the lower bracket.

Remove the pre-assembled bracket screws

from the lower bracket. Insert the hook from

one side of the lower bracket into the slot of

the mounting bracket. Then insert the other

side of the lower bracket into the second

slot in the mounting bracket until the four

mounting screw holes are aligned.

1. Install the mounting bracket.

Secure the mounting bracket to the outlet

box (not included) using the washers and

mounting screws supplied with outlet box.

Warning: To reduce the risk of re, electrical

shock, or personal injury, mount the fan to

the outlet box marked “Acceptable for fan

support”.

3. Secure the lower bracket.

Secure the lower bracket to the mounting

bracket with the four previously removed

bracket screws.

x 4x 4

Mounting

Bracket

Outlet Box

Black (live)

White (neutral)

Bare/Green (ground)

Black

Blue

White

Green

4. Wire the fan.

Connect household supply and fan wires

according to the diagram and these steps:

• Connect the Green wire from the lower

mounting bracket to the Bare/Green (ground)

supply wire.

• Connect the White wire from the fan to the

White (neutral) supply wire.

• Connect the Black and Blue wires from the

fan to the Black (hot/live) supply wire.

• Secure all wiring connections with wire

connectors.

IMPORTANT: Ensure the wire connections

are secured inside of the outlet box so they

cannot come in contact with the fan motor

after assembly.

5. Attach the motor housing to the

mounting bracket.

Partially loosen the two mounting screws

preinstalled in the J-slots and completely

remove the other two mounting bracket

screws from round holes. Lift the motor

housing over the motor aligning the J-slots

in the motor housing with the loosened

mounting bracket screws in the mounting

bracket. Twist the motor housing clockwise

to lock. Then re-insert the two previously

removed mounting bracket screws and

tighten all four screws with a Phillips

screwdriver.

x 3 x 4

Mounting

Bracket

Screw

Note: If there is a second hot supply wire

coming from the outlet box, connect it to the

blue (light power) fan wire for separate light

and fan control.

ASSEMBLY INSTRUCTIONS

6. Attach the blades to blade arms.

Partially insert blade screws along with

blade washers through blade and into blade

arm. Tighten each blade screw, starting with

the one in the middle. Repeat this step for

the remaining blades and blade arms.

x 15 Blade Washer

Blade Arm

Blade Screw

7. Attach blade arms to motor.

Remove the ten motor screws from the

underside of the motor. Then, install the

blade arm to the underside of the motor

assembly with the ten previously removed

motor screws.

To install the fan without the light kit,

skip to page 9.

x 10

Blade Arm

Motor Screw

ASSEMBLY INSTRUCTIONS

8. Connect light kit wiring.

Remove the three switch housing screws

from the top of the light kit. Then connect

the single-pin connector from the switch

housing to the single-pin connector from the

light kit -- white to white and blue to black.

Switch

Housing

Screw

Single-pin

Connector

Light Kit

9. Attach light kit to switch

housing.

Secure the light kit to the switch housing

using the previously removed switch

housing screws.

Light Kit

Switch

Housing

Screw

x 3

10. Install the two E26-base LED

bulbs.

Important: When replacing bulbs, allow

bulbs and light kit to cool before touching.

Bulb

ASSEMBLY INSTRUCTIONS

11. Install glass bowl.

Attach the glass bowl by inserting the three

spring clips inside the neck of the glass bowl

and rmly push the glass bowl up until it

is secured to the light kit. Note: The glass

bowl will snap into place once installed

properly.

Glass Bowl

Light Kit Spring Clip

12. Attach pull chain extensions.

Feed the pull chains down through the chain

guides in the light kit and attach the pull

chain extensions.

Assembly is complete. Turn on power to

fan at breaker box and the wall switch.

Pull Chain Extension

Chain

Guide

1. Install switch housing cap to

switch housing.

Remove the three switch housing screws

from the top of the light kit. Attach the switch

housing cap to the switch housing using the

three switch housing screws. Then, install

the plug button into the center hole of the

switch housing cap.

2. Attach pull chain extension.

When facing the reverse switch, the light

pull chain will be on the left and the fan pull

chain will be on the right.

Note: When installing without a light kit, the

pull chain for the light will not be installed.

INSTALLATION WITHOUT LIGHT KIT (optional)

Switch Housing Cap

Switch Housing

Switch

Housing

Screw

Pull Chain Extension

x 3

1. Pull chain operation.

When facing the reverse switch, the light

pull chain will be on the left and the fan pull

chain will be on the right. When installing

without a light kit, the pull chain for the light

will not be installed.

2. Reverse switch operation.

Use the fan reverse switch, located on the

switch housing to optimize your fan for

seasonal performance.

Using a ceiling fan will allow you to raise

your thermostat setting in summer and lower

your thermostat setting in winter without

feeling a di󰀨erence in your comfort.

Note: Wait for the fan to stop before moving

the reverse switch.

In warmer weather, push the reverse

switch down which will result in downward

airow creating a wind chill e󰀨ect.

In cooler weather, push the reverse switch

up which will result in upward airow that

can help move stagnant, hot air o󰀨 the

ceiling area.

OPERATING INSTRUCTIONS

Fan Pull

Chain

Light Pull

Chain

Reverse

Switch

Reverse Switch

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Prominence Home Ventilateur

Prominence Home

Prominence Home Bolivar 80099 Manuel utilisateur

Prominence Home

Prominence Home Emporia 51021 Manuel utilisateur

Prominence Home

Prominence Home Enoki 51642 Manuel utilisateur

Prominence Home

Prominence Home Liva 51016 Manuel utilisateur

Prominence Home

Prominence Home Hero 51655 Manuel utilisateur

Prominence Home

Prominence Home 51028 Manuel utilisateur

Prominence Home

Prominence Home 51018 Manuel utilisateur

Prominence Home

Prominence Home Almadale 50330 Manuel utilisateur

Prominence Home

Prominence Home 50650 Manuel utilisateur

Prominence Home

Prominence Home MaCenna 51663 Manuel utilisateur

Prominence Home

Prominence Home Cherry Hill Manuel utilisateur

Prominence Home

Prominence Home 51659 Manuel utilisateur

Prominence Home

Prominence Home Espy 52 Manuel utilisateur

Prominence Home

Prominence Home Cicero 52 Manuel utilisateur

Prominence Home

Prominence Home Talib 52 Manuel utilisateur

Prominence Home

Prominence Home Arthur 52" Manuel utilisateur

Prominence Home

Prominence Home 51484 Manuel utilisateur

Prominence Home

Prominence Home Eclora 51672 Manuel utilisateur

Prominence Home

Prominence Home Spring Hollow Manuel utilisateur

Prominence Home

Prominence Home Lanissa 52 Manuel utilisateur

Prominence Home

Prominence Home Mandino Manuel utilisateur

Prominence Home

Prominence Home 51584 Manuel utilisateur

Prominence Home

Prominence Home 40278 Manuel utilisateur

Prominence Home

Prominence Home Potomac 51639 Manuel utilisateur

Manuels Ventilateur populaires d'autres marques

ELTA FANS

ELTA FANS H03VV-F Manuel utilisateur

Hunter

Hunter 20714 Manuel d'instructions

Emerson

Emerson CARRERA VERANDA CF542ORB00 Manuel utilisateur

Hunter

Hunter Caraway Manuel d'instructions

Panasonic

Panasonic FV-15NLFS1 Manuel utilisateur

Kompernass

Kompernass KH 1150 Manuel utilisateur

VES

VES FALA100/12V/TR Manuel utilisateur

Vertiv

Vertiv Liebert DCD Manuel utilisateur

Westinghouse

Westinghouse GFP Series Manuel utilisateur

Venmar

Venmar KUBIX HRV PLUS Series Manuel utilisateur

Maico

Maico ECR 31 Manuel utilisateur

Sonnenkonig

Sonnenkonig Dinky Manuel utilisateur

S&P

S&P ECOWATT HXBR Manuel utilisateur

Wider

Wider IMP03369BH Manuel utilisateur

Panasonic

Panasonic F-60DHN Manuel utilisateur

Hinkley

Hinkley HIGHLAND Manuel utilisateur

Broan

Broan 766BN Manuel utilisateur

Premium

Premium PFS16022 Instructions de montage