Promate CarShade Manuel utilisateur
User Guide
CarShade
21 3 4 5
6 7 8 9 10 11
12 13 14 15 16 17
18 19 20 21 22 23
24 25 26
Universal Protective Weather
Proof Car Umbrella
Windproof Design • Anti-Theft Protection • Automated Set-Up
2
English
1 3 4 5
6 7 8 9 10 11
12 13 14 15 16 17
18 19 20 21 22 23
24 25 26
Introduction
Keep your car protected from dust, rain and the sun with Promate CarShade. Easy to install with
the
one-touch wireless remote. The secure suction cup makes this car shade windproof.The
patented
automated folding structures oer a safe and stable weatherproof design. CarShade
has been tested
to reduce your car temperatures by at least 30 degrees. Portable and easy to use,
CarShade is the car
accessory your car needs.
Packaging Contents
• Car Shade holder
• Tarp
• Wireless remote controller
• Car charger
• Storage bag with zipper
• User manual
Features:
• Windproof Design: The strong suction cup coupled with a patented skeleton design ensures
that
the CarShade remains stuck onto your vehicle even on the windiest of days. You may also adjust
the windproof rope length to suit your vehicle.
• Easy To Use: Easy to install with the one-touch wireless remote
• One Click Wireless Setup: Automatically fold and unfold with a remote control device. The
whole open process takes 8s, and total installation process takes the 30s
• Reduce Temperatures by 30Degrees: Air ventilation between the CarShade and thecar
proven
eective to block heat transmitted to the car in high temperatures.
• Anti-Theft Protection: The steel wire woven into the fasten ropes prevent theft of the CarShade.
• Ultra-Portable Design: 33in/85cm in length after folded up in a storage bag. 6.7kgs only,
with
no extra burden to your trunk.
• Universal For any Car: The 4.4m x 2.2m surface can protect any car from Dust, acid =rain
and
bird droppings.
Compatibility:
CarShade is compatible with all Cars and SUVs.
English
2
1 3 4 5
6 7 8 9 10 11
12 13 14 15 16 17
18 19 20 21 22 23
24 25 26
Precautions:
Please read all safety instructions and warnings thoroughly before using this product. Im proper
use of this product may result in damage to this or attached products.
1. Do not disassemble the device or attempt to x it.
2. Do not try to replace any part of this product. Remote control battery is replaceable.
3. Do not crush, puncture or dispose of in re.
4. Do not store or use the device in a high-temperature environment, including intense sunlight
or heat.
5. Avoid excessive drops, bumps, abrasions and impacts.
6. If there is any reason to believe that there is internal damage to the device, discontinue
using
immediately.
7. Do not use the CarShade when driving.
8. Install the hooks after the CarShade has opened completely.
9. Avoid use in high winds or a storm.
10. Ensure the hooks are fastened tightly to the car.
11. In case you lose the remote, press the reset button on CarShade to fold it.
12. In the event of a malfunction, push the reset switch on the CarShade to fold it. If this
does
not work, charge the CarShade using the car charger provided and press the reset
button again.
13. If the above is not functioning, unfasten the 8 windproof snap fasteners and remove
the B-type pin on the base of the CarShade handle, pull out the locking pin and fold the
umbrella manually as
2
English
1 3 4 5
6 7 8 9 10 11
12 13 14 15 16 17
18 19 20 21 22 23
24 25 26
1. CarShade Handle
2. Suction Holder
3. Anti-Theft Safety Rope
4. Windproof Hooks
5. Soft Rubber Mat
6. Tarp Snap Fastener
7. Reset Button
8. Car Charger Socket
9. Charging LED
10. Lock Pin
11. Steel Handle
12. Power Switch
Appearance & Interface Description
9
8
2
1
12
11
10
7
6
4
4
4
4
4
4
3
2
1
5
English
27
2
English
1 3 4 5
6 7 8 9 10 11
12 13 14 15 16 17
18 19 20 21 22 23
24 25 26
Usage Instructions:
1. Installation of“CarShade”:
1. Place the“CarShade”on the car with the suction cup rmly set in the middle of the car
roof
with the handle of the“CarShade”Base facing you.
2. Press the Power Switch to the“On”position.
3. Untie the gathering rope.
4. Pull down the steel handle to fasten the CarShade onto the roof of the car.
5. Clip the“Anti-Theft Safety Rope”within the car and close the car door.
6. Press, the button“ ”on the remote controller, to turn on the automatic unfolding of the“CarShade”.
7. Wait for the“CarShade”to unfold completely.
8. Clasp the“Windproof Hooks”onto your car as shown below. Adjust the length of the
straps
if required.
English
28
2
2. Removal of“CarShade”:
1. Detach the “Windproof Hooks”.
2. Press the button“ ”on the remote controller to turn on the automatic folding of the“CarShade”.
3. Open the car door and remove the“Anti-Theft Rope”.
4. Pull the“CarShade”Base o the car and tie the gathering rope.
3. Charging“CarShade”
Connect one end of the car charger to“CarShade”and the other end to the charging
socket in your vehicle. The blue charging LED will light up indicating that the“CarShade”
is charged
completely. The red charging LED indicator will blink when the battery is
charging.
1 3 4 5
6 7 8 9 10 11
12 13 14 15 16 17
18 19 20 21 22 23
24 25 26
English
29
2
English
1 3 4 5
6 7 8 9 10 11
12 13 14 15 16 17
18 19 20 21 22 23
24 25 26
2
Spanish
1 3 4 5
6 7 8 9 10 11
12 13 14 15 16 17
18 19 20 21 22 23
24 25 26
Descripción del Aspecto y la Interfaz
1. Agarradera del CarShade
2. Soporte de ventosa
3. Cuerda de seguridad antirrobo
4. Ganchos a prueba de viento
5. Tapete de hule suave
6. Sujetador rápido de la lona
7. Botón de reinicio
8. Cargador para el automóvil
9. LED de carga
10. Pasador de bloqueo
11. Mango de acero
12. Interruptor
9
8
2
1
12
11
10
7
6
4
4
4
4
4
4
3
2
1
5
2
Spanish
1 3 4 5
6 7 8 9 10 11
12 13 14 15 16 17
18 19 20 21 22 23
24 25 26
Instrucciones de uso:
1. Instalación del "Carshade"
1. Coloque el cobertor "CarShade" sobre el coche jando la ventosa rmemente en el centro
del
techo del coche con la agarradera de la base del "CarShade" mirando hacia usted.
2. Oprima el interruptor POWER a la posición "ON".
3. Desate la cuerda de recoger.
4. Baje la manija de acero para asegurar el cobertor CarShade sobre el techo del coche.
5.Ate la "Cuerda Antirrobo" dentro del coche y cierre la puerta.
6. Pulse el botón“ ”del mando a distancia para activar el desenrollado automático del cobertor
“CarShade”.
7.Espere a que el "CarShade" se desdoble por completo.
8.Engarce los "Ganchos a prueba de viento" en su coche como se muestra abajo. Ajuste la l
ongitud
de las cuerdas si es necesario.
2
Spanish
1 3 4 5
6 7 8 9 10 11
12 13 14 15 16 17
18 19 20 21 22 23
24 25 26
2. Cómo retirar el cobertor“CarShade”:
1. Separe los“Ganchos a prueba de viento”.
2. Presione el botón " ”en el mando a distancia para activar el plegado automático
del cobertor "CarShade".
3. Abra la puerta del coche y quite la “Cuerda Antirrobo”.
4. Retire la base del“CarShade”del coche y ate la cuerda de recoger.
3. Carga del“CarShade”
Conecte un extremo del cargador del coche al cobertor“CarShade”y el otro extremo a la toma
de carga en su vehículo. El LED de carga azul se iluminará indicando que el “CarShade” se ha
cargado por completo. El indicador LED rojo de carga destella mientras la batería se está cargando.
27
Table des matières
Langues :
Autres manuels Promate Accessoires automobiles
