Promate volTag-UNI Manuel utilisateur
volTag-UNI
10000mAh Lithium-Polymer Power Bank
with in-Built Lightning and micro-USB cables
Ultrafast Charging . Smartphones . Tablets
Charge your smartphones & tablets with this amazing & powerful 10000mAh
lithium polymer power bank: volTag-UNI. Voltag-UNI features in-built Lightning
& micro-USB Cables. volTag-UNI features a LCD screen along with the One-Touch
Button that indicates the amount of battery left in volTag-UNI. Moreover, it also
features a USB port for added functionality. Charge your devices on-the-go with
volTag-UNI.
Introduction
• volTag-UNI Back-up Battery
• Micro-USB Cable
• User Guide
Packaging Contents
• Battery Capacity: 10000mAh
• Input: DC 5V, 2A
• Output: DC 5V, 1A
DC 5V, 2.1A
DC 5V, 2.1A
• Charging Time: 7-8 hours
• Battery Type: Li-polymer
Specication
1
English
2
Features
• Charge your devices on-the-go with this powerful 10000mAh power bank:
volTag-UNI
• Featuring in-built Lightning & micro-USB cables, volTag-UNI oers you one stop
solution to all your charging need
• The powerful lithium polymer battery enables ultra-fast charging
• volTag-UNI features a LCD screen along with the One-Touch Button that
indicates the amount of battery left in volTag-UNI
• Moreover, it also features a USB port for added functionality
• Slim & lightweight, volTag-UNI is easy to carry around
• Extremely safe, volTag-UNI oers over-charging, over-loading & short-circuit
protection
• volTag-UNI is compatible with all USB powered devices, devices featuring
Lightning & micro-USB ports
English
3
Please read all safety instructions and warnings thoroughly before using this
product. Improper use of this product may result in damage to this or attached
products.
1. Do not disassemble the back-up battery or attempt to x it.
2. Kindly use an original charging cable provided to charge the product.
3. Do not attempt to replace any part of this Back-up battery or battery inside.
4. Do not crush, puncture, dispose of in re, short the contacts or expose the
battery to water or other liquids.
5. Do not connect input and output in reverse.
6. Do not store or use the battery in a high temperature environment, including
intense sunlight or heat.
7. Avoid drops, bumps, abrasions and impacts.
8. If there is any reason to believe that there is damage to the battery,
discontinue use immediately.
9. If you nd that the battery is too hot, is emitting an odor, or is deformed,
punctured or exhibits any suspicious or abnormal behavior, discontinue use
immediately and contact our customer service.
10. Always charge this product before extended storage.
Precautions:
English
4
1. One-Touch Button
2. LCD Screen
3. Built-in 1A micro-USB Cable
4. Built-in 2.1A Lightning Connector
5. micro-USB Input
6. 2.1A USB Output
Appearance & Interface Description
English
2
5
6
34
1
5
English
• Simply press the One-Touch Button to view the amount of power left in
volTag-UNI. The LCD Screen will display the amount of power left in volTag-UNI.
1. Checking the remaining power left in volTag-UNI back-up battery
• Connect one end of the micro-USB Cable provided to volTag-UNI and the other
end to a Desktop/Laptop or a USB Power Adapter.
2. Charging volTag-UNI back-up battery
Operation Instructions
6
English
3. Charging USB chargeable devices using volTag-UNI
• Use the built-in 1A micro-USB Cable to charge micro-USB Powered Devices.
• Use the built-in 2.1A Lightning Connector to charge devices supporting
Lightning Connector.
• Moreover, there is an extra 2.1A USB port available on volTag-UNI. Use this port
to charge other USB powered devices. Plug the USB cable into the USB port on
volTag-UNI back-up battery and the other end into the device. The back-up
battery would automatically start charging the connected device.
7
Spanish
1. Botón One-Touch (un Solo Toque)
2. Pantalla LCD
3. Cable micro USB 1A integrado
4. Conector Lightning 2.1A integrado
5. Entrada Micro USB
6. Salida USB 2.1A
Descripción del Aspecto y la Interfaz
2
5
6
34
1
8
Spanish
• Simplemente presione el Botón One-Touch para ver la cantidad de energía que
queda en vol-Tag-UNI. La pantalla LCD mostrará la cantidad de energía que
queda en volTag-UNI.
1. Cómo vericar la energía restante en la batería de respaldo de volTag-UNI
• Conecte un extremo del Cable Micro USB proporcionado a volTag-UNI y el otro
extremo a un ordenador de escritorio/portátil o a un Adaptador de Corriente
USB.
2. Cómo cargar la batería de respaldo de volTag-UNI
Operation Instructions
9
Spanish
3. Cómo cargar dispositivos por medio de USB usando volTag-UNI
• Use el Cable micro USB 1A integrado para cargar Dispositivos Alimentados por
micro USB.
• Use el Conector Lightning 2.1A integrado para cargar dispositivos que
respaldan el Conec-tor Lightning.
• Además, hay otro puerto USB 2.1A disponible en volTag-UNI. Use este puerto
para cargar otros dispositivos alimentados por USB. Enchufe el cable USB en el
puerto USB en la bate-ría de respaldo de volTag-UNI y el otro extremo en el
dispositivo. La batería de respaldo comenzará a cargar automáticamente el
dispositivo conectado.
Table des matières
Langues :
Autres manuels Promate Accessoires
Promate
Promate pocketMate-Uni Manuel utilisateur
Promate
Promate Hitch Manuel utilisateur
Promate
Promate SafariMate Manuel utilisateur
Promate
Promate Ovally Manuel utilisateur
Promate
Promate proPad.3 Manuel utilisateur
Promate
Promate Beam Manuel utilisateur
Promate
Promate EnergyMate Manuel utilisateur
Promate
Promate Cloy-8 Manuel utilisateur
Promate
Promate bluPen.2 Manuel utilisateur
Promate
Promate SolarTrail-2 Manuel utilisateur
Promate
Promate RANGER-1 Manuel utilisateur
Promate
Promate Force-10 Manuel utilisateur
Promate
Promate PolyMax-10C Manuel utilisateur
Promate
Promate voitag-lt6 Manuel utilisateur
Promate
Promate AuraPack-10 Manuel utilisateur
Promate
Promate proVolta-30 Manuel utilisateur
Promate
Promate 100 Manuel utilisateur
Promate
Promate polyMax-8 Manuel utilisateur
Promate
Promate Armor Manuel utilisateur
Promate
Promate proVolta.12 Manuel utilisateur
