Prolyte S36PRT Truss Manuel utilisateur

PROLYTE

S36PRT Truss

User manual

Part 2: Product-specific instructions

Original instructions

DN00171 Issue 1

July 2023

Manufacturer:

Area Four Industries s.r.o.

Spindlerova 286

413 01 Roudnice nad Labem

Czech Republic

T +420 416 810 800

[email protected]

We have made every effort to ensure the accuracy of this manual. No liability will be accepted for

errors. We reserve the right to change or alter our products or manuals without prior notice.

No part of this manual may be reproduced in any form or by any means without prior written

permission.

If you have a warranty claim, malfunction or spare part inquiry, contact your point of sale or the

manufacturer.

If you have comments or improvement ideas for this document, please contact us by using the e-mail

address found on the back cover of the document. All comments and ideas will be carefully considered

in the future development of the product or this document.

Contents

1 Introduction .......................................................................................................................................... 5

1.1 About this product ....................................................................................................................... 5

1.2 Related information ..................................................................................................................... 5

1.3 About this manual ........................................................................................................................ 5

1.4 Terminology.................................................................................................................................. 6

1.5 Standards ...................................................................................................................................... 6

2 Safety .................................................................................................................................................... 6

3 Limitations of use .................................................................................................................................. 6

3.1 Allowable loading ......................................................................................................................... 6

3.2 Structural data .............................................................................................................................. 6

4 Transport, handling and storage ........................................................................................................... 7

5 Identification ......................................................................................................................................... 7

6 Technical specifications ......................................................................................................................... 8

7 Load capacity ......................................................................................................................................... 9

8 Approved accessories............................................................................................................................ 9

9 Coatings and surface treatments ........................................................................................................ 10

10 Slinging methods ................................................................................................................................. 10

11 Assembly and disassembly .................................................................................................................. 10

12 Maintenance ....................................................................................................................................... 10

13 Inspection ............................................................................................................................................ 10

14 Discard criteria .................................................................................................................................... 10

15 Warranty ............................................................................................................................................. 10

16 Certificates .......................................................................................................................................... 10

Change history

Issue Date Changes

1 July 2023 First issue.

1 Introduction

This manual is intended for truss owners, providers and skilled riggers and any person who has been

trained in working safely with trusses.

This manual is Part 2 of the User Manual. The User Manual consists of the following parts:

 Part 1: General instructions

 Part 2: Product-specific instructions

This manual must be read in conjunction with Part 1: General instructions of the User Manual.

If there are discrepancies between Part 1 and Part 2, the information given in Part 2 is the information

that applies to the product and overrides the information given in Part 1.

This manual assumes that you have been trained or work under the control of a competent or qualified

person who has been trained in safety and assembly.

1.1 About this product

PROLYTE trusses are structural elements designed to be repeatedly assembled and disassembled to carry

loads in temporary or permanent installations. Depending on the application, PROLYTE trusses can be

referred to as lifting accessories or construction products. For information on the related standards, see

Chapter 1.5.

The S36PRT series can be used for indoor and outdoor structures.

1.2 Related information

For more information on the product, see www.prolyte.com/products/aluminium-truss.

1.3 About this manual

Before working with the product, read this manual carefully and pay attention to the information

provided. Use this manual to familiarize yourself with the product, its proper use and safety regulations.

1.3.1 Safety conventions

Indicates a hazardous situation, which, if not avoided, will result in death or serious injury. This signal

word is limited to the most extreme situations.

Indicates a hazardous situation, which, if not avoided, could result in death or serious injury.

Indicates a hazardous situation, which, if not avoided, could result in minor or moderate injury.

Indicates information considered important but not hazard-related.

1.4 Terminology

See PROLYTE Trusses User Manual, Part 1: General instructions.

Trusses and truss modules are hereinafter referred to by the term “truss”.

1.5 Standards

See PROLYTE Trusses User Manual, Part 1: General instructions.

2 Safety

Before working with the product, see the section Safety in PROLYTE Trusses User Manual, Part 1: General

instructions. Read the Safety information carefully and pay attention to the information provided.

In addition to the Safety information provided in Part 1, make sure you read the Safety information

provided in this product-specific user manual.

Read these safety texts carefully before working with the product.

Make sure manuals are available at all times for all users and employees.

3 Limitations of use

Make sure you read the information provided in section Limitations of use in PROLYTE Trusses User

Manual, Part 1: General instructions.

PROLYTE trusses described in this manual are not specifically designed for lifting people. Adequate load

reduction and safety precautions, according to local legislation, must be considered when people are

lifted.

3.1 Allowable loading

For load capacity information, see Chapter 7.

3.2 Structural data

All our trusses are calculated according to the Eurocode 9 (DIN-EN 1999) standard. Eurocodes are

standards based on Load and Resistance Factor Design (LRFD).

The structural data provided before January 2016 was based on the German DIN 4113 standard. As this

standard had a different safety principle, the structural values cannot be compared.

TÜV certificates issued after February 2015 are all based on Eurocode 9.

Code Type Material

Geometry

Dimensions

centre to centre Main

chord

[mm]

diagonals

[mm]

Cross-section complete truss

Average

dead

weight

Height Width A Iy Iz IT g

[mm] [mm] [cm2] [cm4] [cm4] [cm4] [kg/m]

S36PRT Rectangular 6082 T6 299 560 50x4 25x3 23.12 4445.05 15460.96 - 26.2

Table 1: Geometry

Code

Design values of resistances

Main

chord Complete truss

N,rd My,rd Mz,rd Vz,rd Vy,rd

[kN] [kNm] [kNm] [kN] [kN]

S36PRT 68.44 40.93 76.65 35.69 -

Table 2: Design values of resistances

4 Transport, handling and storage

See PROLYTE Trusses User Manual, Part 1: General instructions.

5 Identification

See PROLYTE Trusses User Manual, Part 1: General instructions.

6 Technical specifications

7 Load capacity

In addition to the information and instructions provided in PROLYTE Trusses User Manual, Part 1: General

instructions, the truss loads shall never exceed the values stated in the load tables below.

As per Eurocode 9, all values provided are calculated based on a safety factor of 1.1 on the material and

1.5 on the load.

8 Approved accessories

For a complete overview of approved accessories, see our brochures or www.prolyte.com.

By using excessive force when tightening accessories such as lamp hooks or cell clamps, you may cause

damage to the truss chords.

Pay special attention when using lamp hooks or cell clamps. Their inside radius may not meet the

tube they need to be attached to. This can lead to severe damage.

You should never allow accessories to damage other products.

9 Coatings and surface treatments

See PROLYTE Trusses User Manual, Part 1: General instructions.

10 Slinging methods

See PROLYTE Trusses User Manual, Part 1: General instructions.

11 Assembly and disassembly

See PROLYTE Trusses User Manual, Part 1: General instructions.

12 Maintenance

See PROLYTE Trusses User Manual, Part 1: General instructions.

13 Inspection

See PROLYTE Trusses User Manual, Part 1: General instructions.

14 Discard criteria

See PROLYTE Trusses User Manual, Part 1: General instructions.

15 Warranty

See PROLYTE Trusses User Manual, Part 1: General instructions.

16 Certificates

The TÜV certificates for this product are available at:

https://www.prolyte.com/support/certificates/certificates-download

Contact details:

PROLYTE BV.

Industriepark 9

9351PC Leek

The Netherlands

T +31 594 85 15 15

[email protected]

www.prolyte.com

Table des matières

Autres manuels Prolyte Système de levage

Prolyte

Prolyte H30V Rigging Tower Manuel utilisateur

Manuels Système de levage populaires d'autres marques

morse

morse 82H-124 Manuel utilisateur

Braun

Braun NL955 Series Manuel utilisateur

haacon

haacon 1889.10 Manuel utilisateur

Protekt

Protekt AT 252 Manuel utilisateur

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Manuel utilisateur

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Manuel utilisateur

Genie

Genie Z-60/34 Manuel utilisateur

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Manuel utilisateur

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Manuel utilisateur

Custom Equipment

Custom Equipment Hy-Brid 3 Series Manuel de programmation

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Manuel de programmation

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Manuel de programmation

BERG

BERG BeNomic EasyLeaf Manuel utilisateur

Powermate

Powermate LiftGate LG-3 Manuel utilisateur

Snorkel

Snorkel TM12 Series Manuel utilisateur

Terberg

Terberg OMNIDEKA Manuel utilisateur

Harmar Mobility

Harmar Mobility AL625 Mode d'emploi

Rotary

Rotary SPO16 Manuel utilisateur