ProLite Mini-Web Manuel utilisateur

Page | 1

Mini-Web

RS232 to TCP/IP Converter Module

Quick Start Guide

Version 1.0

Page | 2

Application Overview

Any computer in the network will have access to the advertising unit via the BF-430. In order to achieve

communication, the computer(s) will require the advertising software to be installed. Since the

advertising unit(s) require serial communication, the VCOM Tool software must also be installed so that

a virtual COM port can be created.

Installing the Mini-Web

1) Make sure sign power is disconnected.

2) Connect a LAN cable from your network to the RJ45 port on the Mini-Web.

3) Connect the provided COMM CABLE from the sign to the SERIAL port on the Mini-Web.

4) Connect power to sign and make sure the red light on the Mini-Web is ON.

NOTE: No connection is necessary for the 5VDC port on Mini-Web. Power comes directly from

the sign.

RS232

LAN

NETWORK

MINI-WEB

COMM CABLE

Page | 3

Use IP Search to Locate/Modify Mini-Web Settings

1) Insert the supplied CD into your CD-ROM drive.

2) Run the file IP Search-V1.1.

You can also download IP search from the following web link:

http://03be17e.netsolhost.com/ZIP_folder/IP Search-V1.1.zip

3) If IP Search does not automatically locate the Mini-Web, click on Refresh.

4) Click on the Mini-Web you would like to configure and the settings will automatically appear in the

modifications window.

5) Proceed to change the IP, Sub Mask, and Gateway to allow for operation in your network

environment and click Alter to save your settings onto the Mini-Web.

NOTE

Clicking twice on the Mini-Web that appears in

IP Search will automatically open your web

browser and prompt you to enter a User Name

and Password to enter the advanced setting

section. This area has additional settings to tailor

the Mini-Web for specific networks or

applications. For additional information, please

refer to Advanced Settings.

Page | 4

6) After 5 seconds, click on Refresh and IP Search will bring up the new settings of the Mini-Web.

7) Exit IP Search.

Install the TruColorXP Software

If you have a previously installed TruColorXP software on your computer, click on HELP and ABOUT.

Confirm that the software version is 8.02A-08.

Upgrading to the latest TruColor XP version

If your software version is not 8.02A-08, you will have to download the latest version from our website:

http://www.pro-lite.com/support

Click User Installation Guides and Software Downloads, TruColor, and TruColorXP Version 8.

Make sure and uninstall the previous version before installing the newer version. Do not change any

settings during the installation process. All installation options must remain at the default settings.

TruColorXP Software Setup

1) Launch the TruColorXP Software.

2) Click on LAN Function then SET IP.

3) Click on ADMINISTRATORS(A) then PASSWORD.

Page | 5

4) For password, enter “222222”

5) Click on IP(I) then ADD NEW IP(N)

6) Enter the information of the Mini-Web.

7) Click ADD to save your settings.

9) The ADD NEW IP SUCCESSFUL window will appear.

10) Close all IP modification windows.

User Code: enter any name up to 5 characters

Ethernet Address: enter the MAC Address of the

Mini-Web

New IP Address: enter the IP address associated

with the Mini-Web

Detect Hardware: select NO

Page | 6

Sign Communication

1) Type a short message in the text area of the software screen.

2) Click on LAN FUNCTION then SEND MESSAGE.

3) Enter the SIGN ID and PAGE the message will be sent to and click on OK.

4) From the SELECT OBJECT drop-down menu, select your Mini-Web and click OK.

5) The SENDING MESSAGE TO SERVER window will appear followed by SUCCESSFUL TRANSMISSION.

6) Your message should now be showing on the sign.

The default sign ID is 01 and PAGE A is the first

memory slot on the sign.

Page | 7

Troubleshooting

The Mini-Web will not power on.

Make sure and use the provided COMM CABLE. The provided COMM CABLE is a 6 wire configuration,

not a 4 or 2 wire configuration found on standard home phones.

IP Search does not find the Mini-Web.

Bypass the network and setup a local connection instead. Once configured and tested, move to LAN

environment.

I configured the Mini-Web successfully, but when I select SEND via LAN, I get an error message.

Possibility 1: Make sure you are running the latest TruColorXP Software. Refer to the TruColorXP

installation section.

Possibility 2: A computer security program is interfering with the communication. Try turning off any

firewalls or anti-virus programs.

I configured the Mini-Web successfully and use the SEND via LAN function, but the sign does not show

my updated message.

Make sure the communication port on the sign is working by sending a message directly from the

computer Com Port to sign. In the Sign Accessories bag, a Serial Comm Cable (9pin to RJ11) was

provided.

Page | 8

Advanced Settings Section

For most applications, the Mini-Web is ready to go and has already been preconfigured to work with

your sign. The beginning of this guide outlines the few setup requirements necessary for the Mini-Web

to work in most standard network environments. For the advanced user, the Advanced Settings Section

provides additional settings to tailor the Mini-Web to meet unique applications and network

environments.

The default IP Address for the Mini-Web is 192.168.168.125

The default User Name and Password are “admin”.

One Page Quick Setup (options)

STATIC IP

DHCP CLIENT

PPOE

►IP Address

►Host Name

►User Name

►Subnet Mask

►Serial Type

►Password

►Gateway

►Baud Rate

►Service Name

►Primary DNS

►Connection Mode

►Close Connection when Idle

►Serial Type

►Connection Port Number

►PPOE with Fixed Address

►Baud Rate

►Remote Host IP (for Client only)

►Serial Type

►Connection Mode

►Baud Rate

►Connection Port Number

►Connection Mode

►Remote Host IP (for Client only)

►Connection Port Number

►Remote Host IP (for Client only)

Operation Mode (options)

TCP Server

TCP CLIENT

►Local Listen Port Number

►Remote Connection Port Number

►Close Connection When Idle

►Remote Host IP Address

►Access Password

►Keep Alive Check

UDP Server

UDP CLIENT

►Local Listen Port Number

►Remote Connection Port Number

►Remote Host IP Address

Serial Type (options)

►Serial Type

►Baud Rate

►Data Bits

►Parity Check

►Stop Bits

►Flow Control

►Force Packet Transmit Time

►Force Packet Transmit Length

Page | 9

►RS485 Transmission Delay Time

Dynamic DNS (options)

Disabled

TZO

DYNDNS

►Status

►Email Address

►User Name

►Password Key

►Password

►Device DNS Name

►Registry IP Address

►Status

Device Administration (options)

►Block HTTP Ports

►Device Management IP Address

►Device Host Name

►Device Location

►Administrator Password

►Block Ping Request

►MAC Address Change

►Factory RESET Button

System Status (options)

►BF-430 Status Monitor

Backup & Restore (options)

►Backup

►Restore

Upgrade Firmware (options)

►File Select

Ping (options)

►Source IP Address

►Destination IP Address

►Packet Number

►Packet Size

►Ping Result

Page | 10

Phone: 714-668-9988 | Fax: 714-668-9980 | Web: www.pro-lite.com

Web Support: www.pro-lite.com/support

Email (Sales): sales@pro-lite.com

Email (Support): [email protected]

Table des matières

Manuels Convertisseur de média populaires d'autres marques

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuel utilisateur

SPROLINK

SPROLINK VA1 Manuel utilisateur

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuel utilisateur

Nikon

Nikon AF-S TC-20E III Manuel utilisateur

Axis

Axis AXIS Q7406 Manuel utilisateur

Omega

Omega TAC80B-J Manuel utilisateur

Zoom

Zoom Thunderbolt TAC-2R Manuel utilisateur

OST

OST iConverter 10/100M Manuel utilisateur

Vertiv

Vertiv Netsure Manuel utilisateur

birddog

birddog MINI Manuel utilisateur

Roland

Roland GI-10 Manuel utilisateur

Wallenstein

Wallenstein WX310 Manuel utilisateur

Pace

Pace MSS 200-1 Manuel utilisateur

Solar Converters

Solar Converters EQ 12/24-50 Manuel utilisateur

CYP

CYP EL-7400V Manuel utilisateur

TIE

TIE MIDI 1i1o Manuel utilisateur

DCS

DCS Vivaldi Upsampler Manuel utilisateur

Westermo

Westermo MCW-211 SERIES Manuel utilisateur