ProLights EclFresnel CT+M Manuel utilisateur

USER MANUAL

REV.01-10/23-PRELIMINARY English version

EclFresnel CT+M

EclFresnel CT+MIP

350W 6 colours LED Fresnel with 9,4°-80,8°

zoom

Thank you for choosing PROLIGHTS

Please note that every PROLIGHTS product has been designed in Italy to meet quality and performance requirements

for professionals and designed and manufactured for the use and application as shown in this document.

Any other use, if not expressly indicated, could compromise the good condition/operation of the product and/or be

a source of danger.

This product is meant for professional use. Therefore, commercial use of this equipment is subject to the respectively

applicable national accident prevention rules and regulations.

Features, specications and appearance are subject to change without notice. Music & Lights S.r.l. and all afliated

companies disclaim liability for any injury, damage, direct or indirect loss, consequential or economic loss or any other

loss occasioned by the use of, inability to use or reliance on the information contained in this document.

Product user manual can be downloaded from the website www.prolights.it , or can be inquired to the ofcial

PROLIGHTS distributors of your territory (https://www.prolights.it/sales_network.html).

Scanning the below QR Code, you will access the download area of the product page, where you can nd a broad

set of always updated technical documentation: specications, user manual, technical drawings, photometrics,

personalities, xture rmware updates.

Visit the download area

of the product page

The PROLIGHTS Logo, PROLIGHTS names and all other trademark in this document pertaining to PROLIGHTS services

or PROLIGHTS product are trademarks OWNED or licensed by Music & Lights S.r.l., its afliates, and subsidiaries.

04026 - Minturno (LT) ITALY.

EclFresnel CT+M EclFresnel CT+MIP

01PROLIGHTS - EclFresnel CT+M / EclFresnel CT+MIP

INDEX

SAFETY INFORMATION 02

1 - PACKAGING 05

PACKAGE CONTENT..................................................................................................... 05

OPTIONAL ACCESSORIES............................................................................................. 05

2 - TECHNICAL DRAWING 06

3 - INSTALLATION 10

MOUNTING.................................................................................................................... 10

4 - CONNECTION TO THE MAINS SUPPLY 11

5 - START UP 11

CONNECT AND DISCONNECT POWER FROM THE PRODUCT.................................. 11

6 - PRODUCT OVERVIEW 12

7 - DMX CONNECTION 13

CONNECTION OF THE CONTROL SIGNAL: DMX LINE .............................................. 13

INSTRUCTIONS FOR A RELIABLE DMX CONNECTION ............................................... 13

CONNECTION DAISY CHAIN........................................................................................ 13

CONNECTION OF THE DMX LINE................................................................................ 13

CONSTRUCTION OF THE DMX TERMINATION ........................................................... 14

DMX ADDRESSING ........................................................................................................ 14

8 - CONTROL PANEL 15

DISPLAY AND BUTTONS LAYOUT................................................................................. 15

9 - MENU STRUCTURE 16

10 - RDM FUNCTIONS 20

11 - DMX CHARTS 21

12 - ACCESSORIES INSTALLATION 58

FILTER FRAME (CODE ECLFRCTPMFF) ......................................................................... 58

BARN DOOR (CODE ECLFRCTPMBD)........................................................................... 59

SLIDING BRACKET MOVEMENT ................................................................................... 60

13 - MAINTENANCE 61

MAINTENANCE AND CLEANING THE PRODUCT........................................................ 61

REPLACING THE FUSE................................................................................................... 61

VISUAL CHECK OF PRODUCT HOUSING ..................................................................... 61

TROUBLESHOOTING..................................................................................................... 62

PROLIGHTS - EclFresnel CT+M / EclFresnel CT+MIP02

SAFETY INFORMATION

WARNING!

• See https://www.prolights.it/product/ECLFRCTPM#download for installation instructions.

• Please read carefully the instruction reported in this section before installing, power-

ing, operating or servicing the product and observe the indications also for its future

handling.

This unit is not for household use, only professional applications.

Connection to mains supply

• The Connection to the mains supply must be carried out by a qualied electrical

installer.

• Use only AC supplies 100-240V 50-60 Hz, the xture must be electrically connected

to ground (earth).

• Select the cable cross section in according with the maximum current draw of the

product and the possible number of products connected at the same power line.

• The AC mains power distribution circuit must be equipped with magnetic+residual

current circuit breaker protection.

• Do not connect it to a dimmer system; doing so may damage the product.

Protection and Warning against electrical shock

• Do not remove any cover from the product, always disconnect the product from AC

power before servicing.

• Ensure that the xture is electrically connected to ground (earth). And use only a

source of AC power that complies with local building and electrical codes and has

both overload and ground-fault (earth-fault) protection.

• Before using the xture, check that all power distribution equipment and cables are

in perfect condition and rated for the current requirements of all connected devices.

• Isolate the xture from power immediately if the power plug or any seal, cover, ca-

ble, or other components are damaged, defective, deformed or showing signs of

overheating.

• Do not reapply power until repairs have been completed.

• Refer any service operation not described in this manual to PROLIGHTS Service team

or an authorized PROLIGHTS service center.

Installation

• Make sure that all visible parts of the product are in good visible condition before its

use or installation.

• Make sure the point of anchorage is stable before positioning the projector.

• When suspending the xture above ground level, secure it against failure of primary

attachments by attaching a safety cable that is approved as a safety attachment for

the weight of the xture to the attachment point on the main frame of the product. ln

case the safety cable, enter in action, it needs to be replaced with a new one.

• Install the product only in well ventilated places.

• For non temporary installations, ensure that the xture is securely fastened to a load-

bearing surface with suitable corrosionresistant hardware.

• For a temporary installation with clamps, ensure that the quarter-turn fastener and/or

screws are turned fully, and secured with a suitable safety cable.

0,5 m Minimum distance of illuminated objects

• The projector needs to be positioned so that the objects hit by the beam of light are

at least 0.5 meters (1.64 ft) from the lens of the projector.

03PROLIGHTS - EclFresnel CT+M / EclFresnel CT+MIP

Protection from burns and re

• The exterior of the xture becomes hot during use. Avoid contact by persons and

materials.

• Ensure that there is free and unobstructed airow around the xture.

• Keep ammable materials well away from the xture

• Do not expose the front glass to sunlight or any other strong light source from any an-

gle. Lenses can focus the sun’s rays inside the xture, creating a potential re hazard.

• Do not attempt to bypass thermostatic switches or fuses.

Maintenance

• Warning! Disconnect the xture from AC mains power and allow to cool for at least

10 minutes before handling.

• Only technicians who are authorized by PROLIGHTS or Authorised service partners

are permitted to open the xture.

• Users may carry out external cleaning, following the warnings and instructions pro-

vided, but any service operation not described in this manual must be referred to a

qualied service technician.

• Important! Excessive dust, smoke uid, and particle build up degrades performance,

causes overheating and will damage the xture. Damages caused by inadequate

cleaning or maintenance is not covered by the product warranty.

Photobiological safety

• This device emits potentially dangerous optical radiation and is identied in the cat-

egory of Risk Group 2 according to EN 62471.

Disposal

• This product is supplied in compliance with European Directive 2012/19/EU – Waste

Electrical and Electronic Equipment (WEEE). To preserve the environment please dis-

pose/ recycle this product at the end of its life according to the local regulation.

The products to which this manual refers comply with:

• 2014/35/EU - Safety of electrical equipment supplied at low voltage (LVD).

• 2014/30/EU - Electromagnetic Compatibility (EMC).

• 2011/65/EU - Restriction of the use of certain hazardous substances (RoHS).

Other approvals

Do not stare at the operating light source

• Do not look directly at the LED source during operation. It can be harmful to the eyes

and skin.

• During Installation, operation and maintenance, be prepared for the xture to light

and move suddenly when connected to power.

• The device should be positioned so that prolonged staring into the luminaire at adis-

tance closer than 14,54 m (47,70 ft) is not expected.

Minimun

distance

Risk

Group 2

Risk

Group 1

0.2 m

0.7 ft

10.5 m

34.45 ft

Minimun

distance

Risk

Group 2

Risk

Group 1

0.2 m

0.7 ft

10.5 m

34.45 ft

Minimun

distance

Risk

Group 2

Risk

Group 1

0.2 m

0.7 ft

14,54 m

47,70 ft

PROLIGHTS - EclFresnel CT+M / EclFresnel CT+MIP04

ECLFRCTPM - IP20 Version

Indoor use

• This product is designed for indoor and dry environments.

• Do not use in wet location and do not expose the xture to rain or moisture.

• Never use the xture in places subject to vibrations or bumps.

• Make certain that no inammable liquids, water or metal objects enter the xture.

• Excessive dust, smoke uid, and particle build up degrades performance, causes

overheating and will damage the xture.

• Damages caused by inadequate cleaning or maintenance are not covered by the

product warranty.

45°

Max operating ambient temperature (Ta)

• Do not operate the xture if the ambient temperature (Ta) exceeds 45 °C (113 °F).

-10°

aMinimum operating ambient temperature (Ta)

• Do not operate the xture if the ambient temperature (Ta) is below -10 °C (14 °F).

70°

Temperature of the external surface

• The surface of the xture can reach up to 70 °C (158 °F) during operation. Avoid

contact with people and materials.

ECLFRCTPMIP - IP65 Version

IP65

Permanent Outdoor use

• This product is rated with an IP (Ingress protection) for permanent outdoor use when

used and serviced according to the instruction contained in this document.

• Never use the xture in places subject to vibrations or bumps.

• Make certain that no inammable liquids, water or metal objects enter the xture.

• Excessive dust, smoke uid, and particle build up degrades performance, causes

overheating and will damage the xture.

• Damages caused by inadequate cleaning or maintenance are not covered by the

product warranty.

45°

aMax operating ambient temperature (Ta)

• Do not operate the xture if the ambient temperature (Ta) exceeds 45 °C (113 °F).

T -20°C

Minimum operating ambient temperature (Ta)

• Do not operate the xture if the ambient temperature (Ta) is below -20 °C (-4 °F).

T 80°C

Temperature of the external surface

• The surface of the xture can reach up to 80 °C (176 °F) during operation. Avoid

contact with people and materials.

05PROLIGHTS - EclFresnel CT+M / EclFresnel CT+MIP

1 - PACKAGING

PACKAGE CONTENT

• 1x ECLFRESNEL CT+M / CT+MIP;

• 1x ECLFRSPG: spigot for PROLIGHTS Fresnel series;

• 1x ECLFRCTPMBD: barn door with 8 directional aps to adjust the light beam;

• 1x ECLFRCTPMFF: lter frame for ECLFRESNEL series;

• 1x 1,5 meters power cable (BARE END - NEUTRIK POWERCON TRUE1 IP65);

• 1x User manual

OPTIONAL ACCESSORIES

• FCLECLFRCTPM: Flight case for 4 pcs of ECLFRCTPM series

• ECLFRCTPMBAG1U: Empty ABS case for 1 pc of ECLFRCTPM series

• ECLFRCTPMKPOYO: Pole operated aluminium yoke bracket and zoom kit for ECLFRCTPM series

• SPGM10: 28mm spigot for xtures, M10 bolt

• SPGM12: 28mm spigot for xtures, M12 bolt

• LRTM2SPIBK: CRMX Timo Two SPI kit, black

• EFSBUFDS: SNAPBAG - Universal Small Deeper for barndoors

• SPGM10: 28mm spigot for xtures, M10 bolt

• SPGM12: 28mm spigot for xtures, M12 bolt

• UPBOXPRO: Firmware uploader kit, USB IN, 5pin XLR DMX OUT

• UPBOX1UP5: Firmware uploader kit, USB IN, 5pin XLR DMX OUT

• C6040B: Aluminum clamp for 28mm spigot, 200kg load, 48-51mm tubes, black inc

• TOUR53415L03: Dmx cable HC5340. CANC5MXX XLR 5p->CANC5FXX XLR (f) 5p, L.3m

• 958225L03: 3x2.5mm TH07 Cable, 16A 3p PwCon MXW, 16A 3p PwCon FXW, L. 3m

• 9513FXWL03: Ass. 3x2.5mm TH07 cable, 16A 3p 230V CEE plug, MENAC3FXW socket, L.3 m

• RSR0630B: Steel security cable for hanging bodies, inox steel shackle, L=60 cm, black

• C6002B: Slim aluminum clamp, 200kg loading, 48-51mm tubes, M10 bolt, Black

• 9533FXWL03: Ass. 3x2.5mm TH07 cable, SHUKO plug, MENAC3FXW socket, L.3m

PROLIGHTS - EclFresnel CT+M / EclFresnel CT+MIP06

2 - TECHNICAL DRAWING

338 mm

[13.3 in]

466 mm

[18.3 in]

587 mm

[23.1 in]

121 mm

[4.8 in]

284 mm

[11.2 in]

428 mm

[16.9 in]

493 mm

[19.4 in]

614 mm

[24.2 in]

300 mm

[11.8 in]

121 mm

[4.8 in]

428 mm

[16.9 in]

367 mm

[14.4 in]

479 mm

[18.9 in]

606 mm

[23.9 in]

127 mm

[5.0 in]

300 mm

[11.8 in]

513 mm

[20.2 in]

634 mm

[25.0 in]

121 mm

[4.8 in]

Fig. 01ECLFRCTPM+ECLFRCTPMKPOYO - Weight: 11,9 kg - 26,23 lbs

ECLFRCTPM - Weight: 9,9 kg / 21,82lbs

07PROLIGHTS - EclFresnel CT+M / EclFresnel CT+MIP

121 mm

[4.8 in]

466 mm

[18.3 in]

587 mm

[23.1 in]

555 mm

[21.9 in]

121 mm

[4.8 in]

620 mm

[24.4 in]

741 mm

[29.2 in]

300 mm

[11.8 in]

606 mm

[23.9 in]

555 mm

[21.9 in]

761 mm

[29.9 in]

300 mm

[11.8 in]

Fig. 02

ECLFRCTPM - Weight: 9,9 kg / 21,82lbs

ECLFRCTPM+ECLFRCTPMKPOYO - Weight: 11,9 kg - 26,23 lbs

PROLIGHTS - EclFresnel CT+M / EclFresnel CT+MIP08

2 - TECHNICAL DRAWING

338 mm

[13.3 in]

470 mm

[18.5 in]

591 mm

[23.3 in]

121 mm

[4.8 in]

428 mm

[16.9 in]

620 mm

[24.4 in]

499 mm

[19.6 in]

304 mm

[12.0 in]

121 mm

[4.8 in]

304 mm

[12.0 in]

641 mm

[25.2 in]

428 mm

[16.9 in]

367 mm

[14.4 in]

611 mm

[24.0 in]

Fig. 01

ECLFRCTPMIP+ECLFRCTPMKPOYO - Weight: 12,9 kg - 28,44 lbs

ECLFRCTPMIP - Weight: 10,9 kg / 24,03 lbs

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ProLights Équipement d'éclairage

ProLights

ProLights EclNanoPanel TWC Manuel utilisateur

ProLights

ProLights PFZ725 Manuel utilisateur

ProLights

ProLights ARCLED345 Manuel utilisateur

ProLights

ProLights ARCLED3144RGBWA Manuel utilisateur

ProLights

ProLights ELFIN FC Manuel utilisateur

ProLights

ProLights EclPanel TWCMini2X1 Manuel utilisateur

ProLights

ProLights Astra Profile400 Manuel utilisateur

ProLights

ProLights Diamond142L Manuel utilisateur

ProLights

ProLights Jet Hybrid200 Manuel utilisateur

ProLights

ProLights Reflex Manuel utilisateur

ProLights

ProLights Diamond 193 Manuel utilisateur

ProLights

ProLights UNICO Manuel utilisateur

ProLights

ProLights ArcPod 48Q Manuel utilisateur

ProLights

ProLights LUMIPAR12IRTRI Manuel utilisateur

ProLights

ProLights UV Panel Manuel utilisateur

ProLights

ProLights EclCyclorama 050 Manuel utilisateur

ProLights

ProLights REFLEXs Manuel utilisateur

ProLights

ProLights FZ2000D Manuel utilisateur

ProLights

ProLights PIXIE BEAM Manuel utilisateur

ProLights

ProLights EclPanel TWCXL Manuel utilisateur

ProLights

ProLights EclPanel TWCJR Manuel utilisateur

ProLights

ProLights Cromowash300 Manuel utilisateur

ProLights

ProLights V200SPOT Manuel utilisateur

ProLights

ProLights EclGalleryProfile FC Manuel utilisateur

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur