Profile Design DRV SIZER BAR Manuel utilisateur

DRV SIZER BAR

version 01-03-16-2020

DRV SIZER BAR

Thank you for purchasing this adjustable width Profile Design Sizer Bar. This bar is compatible with a 31.8mm stem clamp. It is not compatible

with any clip on aerobar.

This bar is for bike fitting purposes only.

It is not to be used for riding on the road or track. It may only be used on an indoor trainer or adjustable fitting bike.

Please read these instructions thoroughly before attempting to install this item. Proper installation is required for compliance with Profile Design's

warranty policy. If you are not familiar with installation of handlebars or their accessories, please seek the assistance of your local Profile design

dealer by logging on to www.profile-design.com and using "dealer search" or by calling Profile Design's customer service number.

Tools and materials required:

• 3mm Hex Wrench

• Lithium grease

Your bar kit should contain:

• One (1) central sleeve (aluminium)

• Two (2) quick release levers

• Four (4) M4x0.7x10SHB bolts

• Two (2) DRV105 handlebar drops (right and left)

• Two (2) DRV120 handlebar drops (right and left)

• Two (2) DRV135 handlebar drops (right and left)

If anything is missing from the bar kit please contact your distributor.

INTRODUCTION

DRV SIZER BAR

COMPONENT LIST

01 01

04 0605 06

02 02

03 03

QTY.

Req. Part# Ref.# Part Description

1 4332051DRV / SIZER Bar 105 Flat Black (R+L)

1 4332062DRV / SIZER Bar 120 Flat Black (R+L)

1 4332073DRV / SIZER Bar 135 Flat Black (R+L)

1 1893734Bracket - DRV / SIZER Bar Central Clamp Flat Black

4 3135245Bolt - M4*10 SHB

2 1893746Bracket - Quick-release M6*60L/56A Black

DRV SIZER BAR

PART DRAWINGS

105

122

120

136

135

148

W: 360mm 380mm 400mm 420mm

W: 400mm 420mm 440mm

W: 420mm 440mm 460mm

DRV SIZER BAR

Installation instructions

1. Apply a thin coating of Lithium grease to the inside faces of the central sleeve.

2. Insert the quick release levers with the lever to the front of the bar.

3. Insert the desired handlebar ends with the slot lining up with the bolt holes in the front of the sleeve.

DRV SIZER BAR

4. Insert the M4x0.7x10SHB bolts into the sleeve, passing all the way into the bar. These bolts are to prevent rotation of the bar during the fit.

5. Set the bars to the desired width.

6. Close the quick release levers with the lever oriented at a downwards angle.

DRV SIZER BAR

7. Install the bars on a fit bike or riders bike by clamping the central 31.8mm section and tighten the stem bolts to 6nm.

8. To change the bar width during a bike fit just open the quick release, reset the width and close the levers again.

9. To change the bar shape during a bike fit open the quick release levers, wind the anti-rotation bolts out far enough that the bar can be extracted

then repeat steps 3 to 6.

DRV SIZER BAR

• Profile Design Worldwide TwoYear Limited Warranty.

• Profile Design, LLC (distributor) warrants to the original retail purchaser ("you") that the

Profile Design product for which you received this warranty is free from defects in material

and workmanship for (2) two years from the date of original retail purchase. For more

details on this warranty, its exclusions and/or how to make a claim under the warranty

please call +1 310.747.0085 extension 161 or visit www.profile-design.com/pages/warranty

WARNING

DRV SIZER BAR

2677 El Presidio Street

Long Beach, CA 90810

Ph: 310-884-7756

ww.profile-design.com

Table des matières

Autres manuels Profile Design Accessoires pour vélos

Profile Design

Profile Design Lightning Stryke Manuel utilisateur

Profile Design

Profile Design T2+ DL Manuel utilisateur

Profile Design

Profile Design Canta Zero Manuel utilisateur

Profile Design

Profile Design 43ASC Manuel utilisateur

Profile Design

Profile Design Sonic CSX Manuel utilisateur

Profile Design

Profile Design Carbon X Manuel utilisateur

Profile Design

Profile Design AEROPORT Manuel utilisateur

Profile Design

Profile Design AERIA ULTIMATE RACE Manuel utilisateur

Profile Design

Profile Design DRV/GMR Series Manuel utilisateur

Profile Design

Profile Design 35SLC Manuel utilisateur

Profile Design

Profile Design Split Second Manuel utilisateur

Profile Design

Profile Design ERGO+ ARMREST KIT Manuel utilisateur

Profile Design

Profile Design Carbon Stryke Manuel utilisateur

Profile Design

Profile Design CGT Manuel utilisateur

Profile Design

Profile Design WING20C+ Manuel utilisateur

Profile Design

Profile Design HSF 800 HYDRATION Manuel utilisateur

Profile Design

Profile Design AERIA1 EVO Manuel utilisateur

Profile Design

Profile Design RZ3 Manuel utilisateur

Profile Design

Profile Design Sonic Bracket Manuel utilisateur

Profile Design

Profile Design HSF Aeria Manuel utilisateur

Profile Design

Profile Design A3a Manuel utilisateur

Profile Design

Profile Design Swiftshift Manuel utilisateur

Profile Design

Profile Design Vertex 80 Manuel utilisateur

Profile Design

Profile Design L2 Manuel utilisateur

Manuels Accessoires pour vélos populaires d'autres marques

Sigma

Sigma BC 16.16 Manuel utilisateur

Playcore

Playcore Dero Setbacks Manuel utilisateur

VDO Cyclecomputing

VDO Cyclecomputing x3dw Manuel utilisateur

Cateye

Cateye RAPID X2 Manuel utilisateur

buratti meccanica

buratti meccanica Clorofilla Trail Manuel utilisateur

Shimano

Shimano SG-8R20 Mode d'emploi

BOB

BOB YAK Manuel utilisateur

APLIC

APLIC 303303/20190717TW012 Manuel utilisateur

SRAM

SRAM AXS BlipBox Manuel utilisateur

Garmin

Garmin EDGE 500 Manuel utilisateur

Shimano

Shimano FD-RX810 Manuel utilisateur

Cateye

Cateye V2C - Manuel d'instructions

KMART

KMART 43115907 Manuel utilisateur

SIGMA SPORT

SIGMA SPORT Buster 2000 Manuel utilisateur

NVO Components

NVO Components STEM Manuel utilisateur

DAXYS

DAXYS BP188 Manuel utilisateur

XLC

XLC BV-W17 Manuel utilisateur

Deda Elementi

Deda Elementi SUPERBOX Manuel utilisateur