PROEL PLLEDMLBG Manuel utilisateur

MANUALE UTENTE –USER’S MANUAL

Rev. 11/2006

PLLEDMLBG

LED MOVING HEAD

INTRODUCTION................................................................................ 12

SPECIFICATION................................................................................ 12

SAFETY COMMAND......................................................................... 13

ACCESSORIES INCLUDED.............................................................. 13

FIXING INSTRUCTION...................................................................... 13

CONTROL TUNNEL.......................................................................... 17

APPENDIX 1: adapting system from 5 core to 3 core plug.................. 18

APPENDIX 2: function settings........................................................... 18

APPENDIX 3: Setting Of All Functions................................................ 19



INTRODUCTION

Thank you for selecting our products named LED Move Head Light ,

In the sake of your safety and better use of this product, please read

this user’s manual carefully and note the rules strictly before you

use this product:

It adopts advanced design and processing technics and has trim

appearance. It use high quality glass and RGBsystem and DMX512,

that make it can create unlimited color. It can work according to the

program solidified itself. It use LEDlamp, suitable for outdoor view

of supermarket and disco, theme park, historic sits, castles, hotels,

skyscrapers, holiday, village and stage background.

SPECIFICATION

Voltage: AC 220V/50Hzor AC120V/60Hz

Power:50 W

Lamp:LED(1W×36 LED)

Number of channels:10 Channel

Control model:DMX512 Single/controller/main-follower

Color effected:RGB –16 million colors

Angle of beam:horizontal 540evertical 270 e

Size:300×280×350 mm

Net weight:6Kgs

Others:Function of inspecting itself and working

according to the program.

SAFETY COMMAND

130

High Temperature Lamp

Avoid Current-Passing

•Repaired by regular maintenance only.

•Please disconnect power supply before equip parts or moving

•Please choose correct voltage and lamp size

•Do not touch the lamp with your hand directly.

•Make sure that it is 1m between light and object.

•Don’t see the lamp directly when it works.

ACCESSORIES INCLUDED

•LED Move Head Light

•XLR control line (pc.1)

•Omega Holders (pcs.2)

FIXING INSTRUCTION

This product can works outdoor or indoor. Air temperature must be

under 35°C.

Please read this user’s manual carefully before fixing, operation or

maintain.

Confirm if the product has been shattered during shipment.

Confirm that the power supply is disconnected and the lamp is cool

before you change lamp.

the side has bleb is up , do not touch the lamp with key and digital

display.

Put the light at breezy and confirm fans is ok .

Put the yellow / green 2 color wire on the ground

LED Move Head Lightuse 6A / 250V fuse.

RIGGING

DANGER TO LIFE: Please consider the respective national norms

during the installation. The installation must only be carried out by

an authorized dealer.

The installation must always be secured with a secondary safety

attachment safety rope). This secondary safety attachment must be

constructed in a way that no part of the installation can fall down if the

main attachment fails. A safety rope which already hold the strain of a

crash or which is defective must not be used again.

1.Omega-holders

2.Clamps (optional)

3.Screws

4.Safety-rope

Unscrews 4 screws (3) on the base. Screw one clamp each via a M12

screw and nut onto the Omega-holders. Insert the quick-lock

fasteners of the first Omega-holder into the respective holes on the

bottom ofthe device. Tighten the quick-lock fasteners fully clockwise.

Install the second Omega-holder.

Use 2 appropriate clamps to rig the fixture on the truss; make sure

that the device is fixed properly; make sure that the structure (truss)

to which you are attaching the fixture is secure.

1.Omega Holders

2.Aliscaf

3.Screws

4.Safety cable

OPERATION INSTRUCTIONS

The LEDmoving head uses LED digital display method to control

the channel setting.

The LEDmoving head adopts international standard DMX-512

signal, multiple lights can be controlled by the controller due to use

the channel setting (the details are listed in Appendix 2

Use the XLR-XLR cable from the signal output port of the consol to

connect the signal input port of the first light, connect the signal

output port of the first light with the signal input port of the second

light, and so on, until all lights are connected.

For all installation, having long

signal cables or in the presence of

electrical noise, for example a

discotheque, it is recommended

practice to use a DMX terminator:

this assist in preventing corruption

of the digital control signal by

external noise. The DMX terminator

is simply an XLR connector with a 120Ω(Ohm) resistor connected

across pins 2 and 3, which is then plugged into the DIGITAL THRU

socket on the last projector in the chain.

The LEDmoving head uses core XLR outlet (plug). A transfer line

from 5 core to 3 core will be needed if the controller you use is 5

core outlet (plug). (Please refer to Appendix 1).

When power is on, the equipment will undertake self-examination,

and can undertake operation after the self-examination is finished.

Please don’t shake the equipment when it is in operation.

CONTROL TUNNEL

LED Move Head Lightadopts DMX512 , is has 10 tunnel as

following:

Channel

DMX value

Control

STOBE

0 -255

Slow –fast

RED

0 -255

0 –100%

GREEN

0 -255

0 –100%

BLUE

0 -255

0 –100%

AUTO

0 –254

255

255 Preset color chases

Continue color scrolling

SPEED

0 -255

Adjust color scrolling speed

PAN

0 –255

0 –540°

TILT

0 –255

0 –270°

PAN fine

0 –255

16 bit

TILT fine

0 –255

16 bit

APPENDIX 1: adapting system from 5 core to 3 core plug

Pin 1:GND(SCREEN)

Pin 2:Signal(+)

Pin 3:Signal(-)

3Core Plug

Pin 1:GND(SCREEN)

Pin 2:Signal(+)

Pin 3:Signal(-)

Pin 1:GND(SCREEN)

Pin 2:Signal(+)

Pin 3:Signal(-)

Pin 1:GND(SCREEN)

Pin 2:Signal(+)

Pin 3:Signal(-)

Pin 4:N/C

Pin 5:N/C

Pin 1:GND(SCREEN)

Pin 2:Signal(+)

Pin 3:Signal(-)

Pin 1:GND(SCREEN)

Pin 2:Signal(+)

Pin 3:Signal(-)

Pin 4:N/C

Pin 5:N/C

APPENDIX 2: function settings

UP key

DOWN key

Mmeans menuÈthe menus Enter, it will be used to

confirm every function

Exit

DISPLAYÖÖ

ADDR

Setting the No. of starting channels of the lightÄ1—

512ChannelsÅ

TEST

Setting the self-examination for all channels

XDIR

Setting +/-direction for X Axis (OBVSis + ; REVSis -)

YDIR

Setting +/-direction for Y Axis (OBVSis +; REVSis -)

CHSL

CHSL is defined as Channels Switch which total are two

option include ON & OFF. When it is in “ON”position, the

light is maximum channels. When it shows “OFF”, the

light is the last two channels. 16 Bit is useless.

PERF

PERF is defined as light working speed adjustment with

MAX and NOMA. Which MAX means the fast speed and

NOMA means 80% of MAX speed.

RSET

Reset function.

TIME

Indicates the work time of the projector.

DISP

AOFF: ON means no display. AOFF: OFF means display.

NDSP

OFF:display is in normal position. ON: display is

inverted.

APPENDIX 3: Setting Of All Functions

TIME:

DISP:

DISP

OFF\ON

DISP

OFF\ON

TIME

LAMP

TTME

TIME

Table des matières

Autres manuels PROEL Équipement d'éclairage

PROEL

PROEL PLLED155 Manuel utilisateur

PROEL

PROEL PLLED145 Manuel utilisateur

PROEL

PROEL PLML250SCN Manuel utilisateur

PROEL

PROEL PLLAS050 Manuel utilisateur

PROEL

PROEL PLLAS060 Manuel utilisateur

PROEL

PROEL LIGHTING LED - Manuel utilisateur

PROEL

PROEL PLML250SE Manuel utilisateur

PROEL

PROEL PLLED185 Manuel utilisateur

PROEL

PROEL PLLED105N Manuel utilisateur

PROEL

PROEL SPIDER 575 PLCP575 Manuel utilisateur

PROEL

PROEL PLLAS115X2TWO RAYS Manuel utilisateur

PROEL

PROEL Four Rays Rainbow Manuel utilisateur

PROEL

PROEL AMADEUS ALOGENO Manuel utilisateur

PROEL

PROEL TARKUS 575 SPOT Manuel utilisateur

PROEL

PROEL PLLED135 Manuel utilisateur

PROEL

PROEL STROBO 1000 Manuel utilisateur

PROEL

PROEL PLST15H Manuel utilisateur

PROEL

PROEL LIGHTING Manuel utilisateur

PROEL

PROEL PLLEDC56ALN Manuel utilisateur

PROEL

PROEL Magic green PLLAS200 Manuel utilisateur

PROEL

PROEL PLFON200 Manuel utilisateur

PROEL

PROEL PLC56AL Manuel utilisateur

PROEL

PROEL PLLEDC64ALN Manuel utilisateur

PROEL

PROEL PLFT100EP ANTIALO?PLFT100EF FRESNEL Manuel utilisateur

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur