PROEL KDC3900 Series Manuel utilisateur

KDC3900 Series Keyboard

and BM0900 Modular Base

Manual

21.12.2020

This manual applies to KDC3905, KDC3915 and BM0900 keyboards.

Version 0.1.1

Current list of parameters and on-board software:

http://www.kdc3000.proel.pl/KDC3900/

Full list of parameters is available at:

http://www.kdc3000.proel.pl/KDC3900/docs/parametry%20KDC39xx%20%28v9.xx%29

.html/

ResidentsList program to handle the residents’list can be downloaded from FTP server:

http://www.kdc3000.proel.pl/ResidentsList/

Revision History:

0.1.0:

−Described XML file (A6-2/6 program)

−Added BM0900 to the manual

−Described procedure of reading EEPROM from MCD1803

0.1.1:

−Editorial changes

−Introduced letter suffixes


 
 
Table of Contents 
Device description....................................................................................................................4 
1. Software information .......................................................................................................4 
Device parameters....................................................................................................................5 
Quick start up ...........................................................................................................................6 
Mechanical installation ............................................................................................................9 
1. KDC3905 ...........................................................................................................................9 
2. Modular Base....................................................................................................................9 
Electrical installation ................................................................................................................9 
1. Power supply and main periphery .................................................................................10 
1.1. KDC3905/3915........................................................................................................10 
1.2. BM0900 ..................................................................................................................11 
1.3. Common part for KDC39xx and BM0900 ...............................................................11 
2. Connecting devices in one system .................................................................................12 
3. Looping the bus ..............................................................................................................15 
Installation planning...............................................................................................................16 
Software update.....................................................................................................................18 
1. KDC39xx..........................................................................................................................18 
2. BM0900 ..........................................................................................................................18 
Changing the language (keyboards only) ...............................................................................19 
1. Modifying the language file and displaying presentation screens (keyboard only) ......19 
Graphical programming (keyboards only)..............................................................................19 
1. Editing the residents list.................................................................................................20 
2. Settings...........................................................................................................................21 
3. Language.........................................................................................................................21 
4. Adjustments ...................................................................................................................21 
5. Diagnostics......................................................................................................................22 
6. Time settings ..................................................................................................................22 
Programming type 1905 ( A- ) ................................................................................................23 
1. Entering programming ...............................................................................................23 
2. Program A1 –entering RFID tags ...............................................................................23 
3. Program A-2 –number forwarding and additional numbers.....................................24 
3.1. Blocking the number ..............................................................................................24 
4. Program A3 –lock codes ............................................................................................24 


 
5. Program A4 –parameters of individual premises ..................................................... 25 
6. Program A6 –data copy............................................................................................. 27 
6.1. Structure of data in CSV file................................................................................... 27 
6.2. XML file structure................................................................................................... 29 
7. Program A-7 –changing the installer code................................................................ 29 
8. Program A-8 –parameters change............................................................................ 30 
8.1. Parameters organization........................................................................................ 30 
8.2. Field edition ........................................................................................................... 31 
8.3. Bit masks, flags....................................................................................................... 31 
9. Program A-0 –restoring default settings................................................................... 33 
9.1. Copying MCD1803 memory................................................................................... 34 
10. Autobackup................................................................................................................ 34 
System configuration ............................................................................................................. 35 
1. Keyboard addressing.................................................................................................. 35 
2. Global and local parameters...................................................................................... 35 
3. Master-slave bus configuration using common keyboards....................................... 36 
4. Apparatus line............................................................................................................ 38 
4.1. Connecting the apparatus lines ............................................................................. 38 
4.2. Message E-2 ........................................................................................................... 38 
4.3. Address type .......................................................................................................... 38 
5. Locking bolt................................................................................................................ 38 
5.1. Electrical installation.............................................................................................. 38 
5.2. Configuration ......................................................................................................... 38 
6. Number conversion.................................................................................................... 41 
6.1. Standard numbering .............................................................................................. 41 
6.2. Hotel numbering (storey)....................................................................................... 42 
6.3. Preshift from the master........................................................................................ 43 
6.4. Letter suffixes......................................................................................................... 44 
7. Table of codes ............................................................................................................ 45 
8. Feedback.................................................................................................................... 45 
8.1. Feedback configuration.......................................................................................... 45 
8.2. Use of feedback...................................................................................................... 45 
9. Additional parameters ............................................................................................... 47 
9.1. PBX flags................................................................................................................. 47 
9.2. RTCC time server (watch)....................................................................................... 47 
Events..................................................................................................................................... 48 

12.1. Definitions of events...................................................................................................48

12.2. Response to an event .................................................................................................49

12.3. Delays .........................................................................................................................50

12.4. Beeper configuration..................................................................................................50

12.4.1. Beeper in delay time...............................................................................................50

12.5. Optimized event response for common keyboard.....................................................50

1. Device description

Intercom systems of KDC3900 (and BM0900) series are a combination of KDC19xx series and

modern design known from KDC3000 series. KDC3905 panel combines the functions of an input

keyboard and an intercom control panel –built-in line operation. By transferring the configuration

of intercom system from the 1900 series, the system based on 3900 series is equally flexible in

configuration and enables construction of complex systems, which using the old type PBX

(cd1803) would be impossible without the use of a special program variant.

The BM0900 modular base is the basis for creating very complex systems with multiple entrances,

multi-block systems (entire housing estates), porter service and extensive video systems. The

BM0900’s operation, peripheral connection and programming is the same as for KDC3900.

Key features of KDC3900 series keyboards:

•Appearance:

oModern design known from the 3000 series keyboards

oMany color variants

oGraphical display with built-in residents list

oBacklit keyboard with brightness control

•Technical:

oBuilt-in apparatus line

oLock control directly from the keyboard

oOperation of ordinary and reversible locks and electromagnetic jumpers

oBuilt-in control output, e.g. for door operation or lighting

oStrain gauge keyboard known from KDC3000 or KDC1805

oRFID proximity tag support

oSupports microSD memory cards up to 2GB

oUSB port for resident list and software updates

1.1. Software information

The KDC39xx series is constantly developed, and therefore it is important to check for updates on

the manufacturer’s website. The software update can be carried out with the help of a computer

working under control of the operating system.

Windows (XP, 7, 8, 8.1 and 10).

To perform the update, you need an adapter, available at the manufacturer’s store, and the

ResidentsList3900 software, available at proel.pl

For instructions on how to update, see chapter 7Software update .

2. Device parameters

Parameter

Value

Supply voltage

•KDC39XX: 14-24V DC

•BM0900: 230V AC

Dimensions

•KDC39XX: 220x135x11 [mm].

•BM0900: compatible with DIN4

Temperature range

-30÷60°C

Supply current (without locking bolt)

150mA (KDC39XX: up to 0.5A below 5°C)

Power supply current (max)

Max. locking bolt current

0.5A

Maximum load OC

50mA

Memory cards

microSD, max 2GB (not SDHC), FAT16

Display (KDC3905 only)

128x64, monochrome

3. Quick start up

The following are the basic steps for basic configuration of KDC3900 system. Programming is

done via two programming menu:

•Graphic –borrowed from KDC3100 (available only for KDC39XX keyboards)

•A- –borrowed from KDC1905

The operation should start from the graphic menu:

a) Entering the “graphical”programming: press and hold down while idle

0 -> -> 240360 -> installer code (default ‘0000’).

2) Keyboard security:

a) Enter the “Settings”submenu using buttons and , by confirming with button , then

select “Installer code”

b) The cassette will display the current code. Delete the old code with button , enter a new

installer code, confirm with button , enter a new code again and confirm with button

The code can also be changed from the old type programming menu in submenu A-7 (see

chapter 10.7) –this is the only option for BM0900

3) Entering residents’data (KDC39XX keyboard only):

a) Enter in the “Editing the residents list”

b) Press , “Edit entry”or “New entry”

c) Fill in the “Premises number”field –this is a number entered by the user from keyboard

d) The field “Destination number”is used to redirect a number entered from keyboard (e.g.

from 100a to 250)

e) In the ‘Lock code’field you can overwrite standard code, which is generated by a code

table (attached to the device in paper form)

f) IDs are recorded via item “RFID”–press , select “Add RFID”and then bring next IDs

closer to the keyboard digit. All of them will be added to the edited entry

g) In the “Surname”field you can enter a text, which will be displayed on the residents list

available from the main screen. It is also possible to hide the entry by entering the value

1 in the “Hidden”field.

4) Configuration of display and volume:

a) Go to the “Adjustments”tab

b) Using buttons 1-5 it is possible to change the adjusted parameter, the button 0 changes

adjustment step

•1 –volume of beeper from the button

•2 –volume of ringing tone on the keyboard

•3 –contrast

•4 –backlight brightness in active state

•5 –backlight brightness at idle (lifting above 50% is not recommended)

c) Locking configuration –if other than standard 12V locking is used. The configuration is

described in chapter 11.5.2

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels PROEL Clavier

PROEL

PROEL KDC1905 Manuel utilisateur

Manuels Clavier populaires d'autres marques

Vortexgear

Vortexgear POK3R Manuel utilisateur

Razer

Razer RZ03-0188 Manuel utilisateur

Logitech

Logitech RUGGED LITE Manuel utilisateur

Honeywell

Honeywell ADEMCO 5839 Instructions de montage

Hama

Hama AK-120 Manuel utilisateur

Rodgers

Rodgers RK-76 Manuel utilisateur

Logic Controls

Logic Controls KB5000 Series Manuel utilisateur

Rapoo

Rapoo E9270P Manuel utilisateur

iKey

iKey DP-88 Manuel utilisateur

Logitech

Logitech G413 TKL SE Instructions de montage

Keychron

Keychron C1 Manuel utilisateur

Dahua

Dahua NKB Manuel utilisateur

Ultimate Technology

Ultimate Technology 500 POS Manuel utilisateur

Ducky

Ducky Shine 5 Manuel utilisateur

Mace

Mace MACALLY MERGOKEY Manuel utilisateur

iKey

iKey KYB-42-KIOSK Manuel utilisateur

Akko

Akko MX108 Manuel utilisateur

Viper

Viper V770 Manuel utilisateur