Prochem Aqua helix Manuel utilisateur

Read these instructions before using the tool.

86366930-C

05/03/16

Operating instructions (ENG)

MODEL: 8.635-000.0

AQUA HELIX

HIGH VOLUME EXTRACTION TOOL

286366930 Aqua Helix

Data Label

Overview

The Aqua Helix is used to extract high volumes of water from deep within carpet and padding.

Warranty Registration

Thank you for purchasing a Prochem product. Warranty registration is quick and easy.

Your registration will allow us to serve you better over the lifetime of the product.

To register your product go to :

www.prochem.com/WarrantyRegistration.aspx

For customer assistance:

1-800-776-2436

Table of Contents

Data Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . .3

How To Use This Manual . . . . . . . . . . . . . . . . . . . . .4

Safety

HAZARD INTENSITY LEVEL. . . . . . . . . . . . . . . . . .5

Operation

Technical Specifications . . . . . . . . . . . . . . . . . . . . . .6

Setting Up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Operation and Use . . . . . . . . . . . . . . . . . . . . . . . . . .8

Maintenance

Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Cleaning the Extraction Tool. . . . . . . . . . . . . . . . . .10

Parts

Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Handle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

86366930 Aqua Helix

How To Use This Manual

This manual contains the following sections:

• How to Use This Manual

•Safety

• Operations

• Maintenance

• Parts List

The HOW TO USE THIS MANUAL section will tell you

how to find important information for ordering correct

repair parts.

Parts may be ordered from authorized dealers. When

placing an order for parts, the tool model is important.

Refer to the DATA box which is filled out during the

installation of your tool. The DATAbox is located on the

inside of the front cover of this manual.

The SAFETY section contains important information

regarding hazardous or unsafe practices of the tool.

Levels of hazards are identified that could result in

product damage, personal injury, or severe injury

resulting in death.

The OPERATIONS section is to familiarize the operator

with the operation and function of the tool.

The MAINTENANCE section contains preventive main-

tenance to keep the tool and its components in good

working condition.

• Cleaning

The PARTS LIST section contains assembled parts

illustrations and corresponding parts list. The parts lists

include a number of columns of information:

•REF – column refers to the reference number

on the parts illustration.

•PART NO. – column lists the part number for

the part.

•QTY – column lists the quantity of the part used

in that area of the tool.

•DESCRIPTION – column is a brief description

of the part.

•NOTES – column for information not noted by

the other columns.

The manual part number is located on the lower left

corner of the front cover.

86366930 Aqua Helix

Safety

The following symbols are used throughout this guide as indicated in their descriptions:

HAZARD INTENSITY LEVEL

There are three levels of hazard intensity identified by signal words -WARNING and CAUTION and FOR SAFETY.

The level of hazard intensity is determined by the following definitions:

WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death.

CAUTION - Hazards or unsafe practices which could result in minor personal injury or product or property damage.

FOR SAFETY: To Identify actions which must be followed for safe operation of equipment.

Report tool damage or faulty operation immediately. Do not use the tool if it is not in proper operating condition.

Following is information that signals some potentially dangerous conditions to the operator or the equipment. Read

this information carefully. Know when these conditions can exist. Locate all safety devices on the tool. Please take

the necessary steps to train the operating personnel.

FOR SAFETY:

DO NOT OPERATE:

Unless Trained and Authorized.

Unless Operation Guide is Read and understood.

In Flammable or Explosive areas.

In areas with possible falling objects.

86366930 Aqua Helix

Operation

Technical Specifications

ITEM SPECIFICATION

Weight 10 lbs. (4.6 kg)

Depth 7” (17.8 cm)

Width 16” (40.6 cm)

Height MIN.(STORAGE) 37” (94.0 cm) MAX. 54” (137.0 cm)

Construction Aluminum, Polypropylene, Stainless Steel

Width

Height

Depth

86366930 Aqua Helix

Operation

Setting Up

From collapsed storage state;

1. Extend handle by opening the latch.

2. Slide out handle assembly to desired height.

NOTE: Adjust height of extraction tool so that the

vacuum head is flat on the carpet while the handle is

comfortably held for operator’s height.

NOTE: The whole handle assembly can rotate

around the vacuum tube for additional grip positions.

NOTE: The handle is designed to accommodate

various grip positions. Varying the grip on the

extractor tool will extend comfort over longer periods

of usage.

3. Close latch.

Avoid pinching fingers during closing.

4. Connect suction hose to the center vacuum tube.

86366930 Aqua Helix

Operation

Operation and Use

1. Place the extraction tool head flat in the lowest

point in the room to remove as much standing

water as possible, and to minimize water migration

during the process.

NOTE: For best results, extract the perimeter and

work towards center, extractingthe entire area. At the

beginning of each pass, place the vacuum head base

on the carpet for 2 to 3 seconds before moving. This

will give the vacuum a chance to create a good

suction seal and pull down onto carpet.

2. Keeping the base of the head flat against the

carpet surface, slowly pull the tool head backwards

across the carpet. Water extraction will be visible,

and the speed of tool movement will depend on the

carpet type and amount of moisture. Sub-extrac-

tion has been properly performed when the

operator no longer observes moisture flow through

the clear head.

3. At the end of an extraction pass, lower the handle

to tilt the extraction tool back onto the head’s skid

pads. This releases the suction seal with the

carpeting allowing the tool to be pushed forward

easily. Repeat process as needed.

4. Set the pace based on the amount of water in the

flooring. Observe the flow through the clear head to

decide when sufficient extraction is achieved.

5. Test carpet and pad for adequate water removal as

per IICRC500 Standard and Reference Guide for

Professional Water Damage Restoration.

86366930 Aqua Helix

Notes:

86366930 Aqua Helix

Maintenance

Components

1. Handle

2. Latch, Height Adjustment

3. Vacuum Tube

4. Head Mounting Screws

5. Vacuum Head Top

6. Vacuum Head Base

Cleaning the Extraction Tool

Perform after each job.

1. Disassemble the vacuum head.

NOTE: Remove vacuum head base by removing the

four phillips screws from the corners of the clear

vacuum head top, that connects it to the vacuum

head base.

2. Clean thoroughly as per IICRC500.

3. After cleaning towel dry parts or allow to air dry

completely.

4. Re-assemble the extraction tool. Avoid over tight-

ening the screws.

86366930 Aqua Helix

Table des matières

Autres manuels Prochem Machine de plancher

Prochem

Prochem Ninja master 500 PSI NMCU2250H Manuel utilisateur

Prochem

Prochem AX500 Galaxy Manuel d'installation et d'exploitation

Prochem

Prochem EVEREST LP Manuel utilisateur

Prochem

Prochem Ninja warrior 150 PSI Manuel utilisateur

Prochem

Prochem Priority ManufacturingSamurai Manuel utilisateur

Prochem

Prochem Endeavor Series Mode d’emploi

Prochem

Prochem SP500 POLARIS 500 Manuel d'installation et d'exploitation

Prochem

Prochem TR300 FIVESTAR Mode d’emploi

Prochem

Prochem Ninja warrior 1200PSI NWCU1312N Manuel utilisateur

Prochem

Prochem Comanche CM2EC 10075300 Manuel utilisateur

Prochem

Prochem Steempro SX2000 POWERFLO Mode d’emploi

Manuels Machine de plancher populaires d'autres marques

Nilfisk-Advance

Nilfisk-Advance Advance SC370 17B Manuel utilisateur

Numatic

Numatic ET 4045 Manuel utilisateur

HAWK ENTERPRISES

HAWK ENTERPRISES HP1513-180BRUTE Manuel utilisateur

Mytee

Mytee 8070 Mytee-Lite Manuel utilisateur

Kärcher

Kärcher B 140 R Manuel utilisateur

Triple S

Triple S Ace 26T1 Manuel utilisateur

Nilfisk-Advance

Nilfisk-Advance SW 750 Manuel utilisateur

Tornado

Tornado Marathon 2000 98190 Manuel

Windsor

Windsor ADMIRAL Admiral 8 Manuel utilisateur

Numatic

Numatic TTB 1117/100 Manuel utilisateur

Tennant

Tennant 8210D Manuel utilisateur

Nobles

Nobles Frontier Manuel du produit

lavina

lavina 21-X Manuel utilisateur

KENT

KENT Edge 28B Manuel utilisateur

Tennant

Tennant 215 Manuel du produit

Windsor

Windsor BDP 51/2000C Manuel utilisateur

CleanFreak

CleanFreak DURA-18HD Manuel utilisateur

Nilfisk-Advance

Nilfisk-Advance Warrior 34RST Guide de l'administrateur

Prochem aqua helix Manuel utilisateur

Manuels Machine de plancher populaires d'autres marques