PROception PRODMHD11 Feuille d'instructions

INSTALLATION & CONFIGURATION MANUAL

PRODMHD11

Single HD Encoder/Modulator

BLAKE U.K. LTD.

177-187 Rutland Road, Sheffield S 9PT, UK

TEL: 0114-275-9729 FAX: 0114-275-6061

https://www.blake-uk.com/

PRODMHD11 Manual V1.1

TABLE OF CONTENTS

SAFETY PRECAUTIONS ............................................................................................................................ 3

PACKAGE CONTENTS .............................................................................................................................. 3

PRODUCT DESCRIPTION .......................................................................................................................... 4

FEATURES ............................................................................................................................................... 4

SPECIFICATIONS ..................................................................................................................................... 5

INSTALLATION ........................................................................................................................................

UNPACKING and INSPECTION ............................................................................................................................................................................. 6

HARDWARE INSTALLATION and CONNECTIONS ..................................................................................................................................... 6

MODULATOR SETUP AND CONFIGURATION ............................................................................................ 7

INITIAL SETUP TO FACTORY DEFAULT ......................................................................................................................................................... 7

MODULATOR CONFIGURATION .......................................................................................................................................................................... 7

APPENDIX: WINDOWS 8 SETTINGS ........................................................................................................ 18

PRODMHD11 HD Encoder/Modulator Notes ......................................................................................... 21

PRODMHD11 Manual V1.1

SAFETY PRECAUTIONS

The presence of this symbol is to alert the installer and user to the presence of uninsulated

dangerous oltages within the product’s enclosure that may be of sufficient magnitude to produce

a risk of electric shock.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS DEVICE TO RAIN OR

MOISTURE. DO NOT OPEN THE UNIT. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

DO NOT apply power to the unit until all connections have been made, all components have been installed and

all wiring has been properly terminated.

DO NOT terminate, change or uninstall any wiring without first disconnecting the unit’s power adapter from the

device.

This device is supplied with the appropriately rated 12VDC power supply with the centre pin positive. The use of

any other power supply could cause damage and invalidate the manufacturer’s warranty.

DO NOT power on the unit until all cables and connections to the device have been properly connected.

The device should be installed in an environment consistent with its operating temperature specifications.

Placement next to heating devices and ducts is to be avoided as doing so may cause damage. The device should

not be placed in areas of high humidity.

DO NOT cover any of the device’s ventilation openings.



If the device has been in a cold environment allow it to warm to room temperature for at least 2 hours before

connecting power

PACKAGE CONTENTS

This package contains:

One PRODMHD11 HD Encoder/Modulator

One Adapter

One installation/configuration manual

Inspect the package before starting installation to ensure there is no damage and all supplied contents are present.

Contact your distributor or dealer should the device be damaged or package contents are incomplete.

PRODMHD11 Manual V1.1

PRODUCT DESCRIPTION

PROception's PRODMHD11 Modulator converts Digital Video Broadcasting (DVB) high definition video and

audio signals to COFDM. The unit features programmable channel and LCN. The unit's front-mounted LCD

display allows for easy configuration and adjustments.

The compact and economical PRODMHD11 Modulator is perfect for multi-video distribution solutions in

the commercial and institutional market (hotels, motels, sports bars, restaurants, hospitals, casinos,

business and university campus, digital signage, etc.) as well as home entertainment systems.

FEATURES

•

Converts HD signal into a flexible DVB-T Multiplex.

•

HDMI inputs with HDMI loop through.

•

Video resolution up to 1080p.

•

Clean and clear picture of high motion video, sports and text crawls/rolls etc.

•

Programmable via LCD control (on front panel) or via GUI interface for advanced features.

•

All interfaces designed to be clear, simple and user-friendly. Easy to install with factory pre-set for a

typical installation.

•

Output Level 85 dBuV.

•

Manual gain control (+/- 20 dB) to eliminate problems due to high signal strength.

•

LCN Function, fully agile setting.

•

Easy integration into an existing network.

•

RJ45 port for easy setup from remote location.

•

Cool and silent operation.

•

2K & 8K Carrier Modes.

•

Firmware upgradeable.

•

Rack mountable.

•

Suitable for devices with Freeview HD DVB-T2 Tuner (MPEG-4/AVC). Not compatible with SD and

MPEG-2 HD ready TVs.

PRODMHD11 Manual V1.1

SPECIFICATIONS

INPUT PRODMHD11

Input HDMI 1.4

Loop Through HDMI 1.4

OUTPUT

Frequency Range 470~862 MHz

Output Level 85 dBμV

MER 6 dB typ.

MODULATION

Video Resolution 480i, 480p, 576i, 576p, 720p, 1080i, 1080p

Video Compression H.264 AVC

Audio Compression MPEG1 Layer II/AAC

LCN Yes

Carrier (OFDM Mode) 2K/8K

Guard Intervals 1/ 2

Code Rate (FEC) 7/8

Constellations QAM64

GENERAL

Power Supply 12 VDC 1.5 Amp.

Consumption 500 mA

Operating Temperature + 2

F to +104

F (0

C to +40

Storage Temperature +14

F to +140

F (-10

C to +60

Languages English

Dimensions 2 6mm x 155mm x 5mm

Weight 880g

*Specifications subject to change without prior notice

PRODMHD11 Manual V1.1

INSTALLATION

System Installer must adhere to Article 820-40 of the NEC that pro ides guidelines for proper

grounding and specifies that the cable ground shall be connected to the grounding system of the

building, as close to the point of cable entry as possible.

UNPACKING and INSPECTION

Each unit is shipped factory tested. Ensure all items are removed from the container prior to discarding any packing

material.

Thoroughly inspect the unit for shipping damage with particular attention to connectors and controls. If there is any

sign of damage to the unit or damaged or loose connectors contact your distributor immediately. Do not put the

equipment into service if there is any indication of defect or damage.

HARDWARE INSTALLATION and CONNECTIONS

1. Use a HDMI cable to connect the video source (e.g., CATV, DVD, VCR, Camera) to the unit’s HDMI

IN port. It is highly recommended that quality HDMI cable be used for all video source

connections.

2. Use a HDMI cable to connect the unit’s HDMI OUT port to a television. Or use a quality 75Ω coaxial

cable with “F” connectors from the unit’s RF OUT jack to the distribution system (combiner or

reverse splitter) or directly to a television.

3. Connect the included power supply to the unit’s DC 12V POWER jack.

4. Connect the power supply to an appropriately rated AC power outlet.

5. Use a quality RJ45 cable to connect the Web Management port to a computer RJ45 port for

setup/manage the unit.

6. Connect the included adapter to the unit's DC 12V Power plug.

7. Connect the adapter to an appropriately rated AC power outlet.

PRODMHD11 Manual V1.1

MODULATOR SETUP AND CONFIGURATION

INITIAL SETUP TO FACTORY DEFAULT

The digital modulator’s front panel is used to configure the modulator as desired.

MODULATOR CONFIGURATION

Once the modulator is powered up it will go through an internal booting process. When the booting process is

finished,

the LCD Display shows the default Channel number and LCN.

There are two parameters to setup, Channel number and LCN. For switching between the two parameters, press OK

button until the arrow flashes. Press UP/DOWN button to select the desired setup parameter. Then, press OK again

to confirm.

Output Channel – Use the Scroll Up/Down button to change the output channel. Available channels are depending

on the local system. The Output Channel is default to E64 (818 MHz). Once the desired output channel is selected

press the OK button to set the channel.

LCN – Use the Scroll Up/Down button to change the LCN. The LCN default value is 101. Once the desired LCN is

selected press the OK button to set the LCN.

PRODMHD11 Manual V1.1



Reset to Default – Turn OFF the unit. Whilst pressing UP and DOWN buttons at the same time,

turn ON the unit. Release the UP and DOWN buttons when the LCD shows Reset To Default. The

unit will reset to factory default.



Caution: Once this process is complete the unit will automatically reset to the factory

default settings. All settings or changes to the encoder/modulator will be lost.

PRODMHD11 Manual V1.1

Procedure to connect to the Encoder via the Web Management port

The following procedure will allow the installer to setup the Encoder via the GUI

(Intranet setup- closed LAN setup)

1. Power up the Encoder

Connect each encoder using a standard CAT5e cable from the Web Management port (located on

the rear panel of the encoder) to a switch. Connect a CAT5e cable from the switch to a PC.

2. Set the PC via the Control Panel to “Obtain an IP address automatically”

Start- Control Panel

View Network Status and Tasks

. Select 'Change Adapter Settings' from the left plane

PRODMHD11 Manual V1.1

4.Select Local Area Connection Icon

Then Right Click – Select Properties

Internet Protocol Version 4(TCP/IPv4) Properties

5. Select “Obtain an IP address automatically” & “Obtain DNS server address automatically”

Table des matières

Autres manuels PROception Convertisseur de média

PROception

PROception PROUHDSCALER Manuel utilisateur

PROception

PROception PRODVC11 Manuel utilisateur

PROception

PROception PRODVC12 Manuel utilisateur

Manuels Convertisseur de média populaires d'autres marques

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuel utilisateur

SPROLINK

SPROLINK VA1 Manuel utilisateur

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuel utilisateur

Nikon

Nikon AF-S TC-20E III Manuel utilisateur

Axis

Axis AXIS Q7406 Manuel utilisateur

Omega

Omega TAC80B-J Manuel utilisateur

Zoom

Zoom Thunderbolt TAC-2R Manuel utilisateur

OST

OST iConverter 10/100M Manuel utilisateur

Vertiv

Vertiv Netsure Manuel utilisateur

birddog

birddog MINI Manuel utilisateur

Roland

Roland GI-10 Manuel utilisateur

Wallenstein

Wallenstein WX310 Manuel utilisateur

Pace

Pace MSS 200-1 Manuel utilisateur

Solar Converters

Solar Converters EQ 12/24-50 Manuel utilisateur

CYP

CYP EL-7400V Manuel utilisateur

TIE

TIE MIDI 1i1o Manuel utilisateur

DCS

DCS Vivaldi Upsampler Manuel utilisateur

Westermo

Westermo MCW-211 SERIES Manuel utilisateur