PROAIM Fly 22 Manuel utilisateur
Instruction Manual
Fly 22” Camera Crane Production
Package (P-FLY-22-PP)
2
Subject Page
Foreword 3
Introducon 4-5
Assembling 6-15
Warranty 16
At Proaim, our goal is to ensure 100% Customer Sasfacon in all that we do.
We back our sales with a 1 year warranty from the date of purchase and work hard
to resolve any problems in the unlikely event one should arise.
With our commitment to connuous improvement and your Feedback, building on
our reputaon of providing aordable, quality products is
PRIORITY #1.
Table of Contents
3
Dear Client,
On behalf of all the people that work so hard to provide you with the most
up-to-date, exible and cost-ecient producon gear, we would like to welcome
you into the Proaim family.
By purchasing your Proaim Fly 22' Camera Crane Producon Package, you have just
joined a host of designers, engineers, machinists, assembly, customer service and
oce sta that take great pride in all that they do. Our mantra of connuous im-
provement has been the guiding principle of how we conduct our business since
day one.
Once you have the opportunity to experience your new Proaim Fly 22' Camera
Crane Producon Package, we hope you will agree that we cra quality products at
a compeve price. Products designed to meet and exceed the standards of to-
day’s real producon world.
Standards set by our valued clients and standards we strive to maintain.
With Best Wishes,
Proaim Team
Welcome To Proaim!
4
Introducon
Almost every producon you see today has some type of crane shot in it because
shooters know how important it is to visualize story telling. Our Proaim Fly 22' is a
lightweight mul- funcon package that lets you boom your camera up and down,
move your camera in an innite number of 360 degree areas to incorporate various
angles easily. Its modular approach oers sophiscated versality to achieve steady
and balanced shots with cameras weighing up to 15kg/33lbs (without pan-lt).
Its unique interlocking joining system enables quick setup. It features a
well-engineered counterbalance system that uses standard weights (not included)
to maintain the balance of crane for aaining smooth and stable shots with
minimal eort. There’s a lot more that goes into this producon package, a rugged
dolly for dynamic moving shots.
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received
everything that is listed below.
LW-100 Jib stand
2 X Red Cables 2X blue Cables
Spreader
Cable Guide support rods
5
Dolly
Weight closer Weight safety ends Connecvity Plate
Weight rod
Sr. Pan Tilt Head with Joysc box Lanc Zoom Controller
Cables and accessories
Packing
6
Take out the Spreader from the Accessory Bag. Spread the spreader on oor and open the
legs of spreader with the help of provided knob.
Assembling
Open the legs of 100mm jib stand then aach it to spreader, lock it in place with the
rubber grips.
In case of Dolly,
Loosen the screw of dolly and extend it as per your requirement and reghten the screw to
secure it.
7
Assembling Jib Secons
Now mount the central fork onto the tripod , then aach boom clamp to secure it well.
Slide the (1 A Secon) into the central fork (secon 2 B) and ghten with the help of knob.
Slide
Insert the connecng bars (secon 1 A) aached it with both the ends (weight bar&
secon 2B) the both the ends using the provided knob.
Connecon bar
knob
8
Assembling Cable Guide And Support Rod
Using the same approach insert 3rd, 4th and remaining secons to the joints and secure
via knobs as shown below.
Aach short cable guide rod on 3rd secon properly. Insert the knob onto the cable guide
rod and ghten the knob properly.
Loosen the bolts on cable guide rod in order to aach cable guide support rod to it.
Reghten the bolt.
9
Using the same steps to and aach long cable guide rod on 2nd secon as shown below.
Insert the weight rod on (1 secon) and ghten the bolt with the help of allen key as shown
in the picture.
Then insert the safety ends at both
sides onto the weight rod.
10
Adjusng The Stability Cables
Cable code (red)
Now aach the both red cable hook onto the provided bolts properly as shown below.
Note : Both the red cables are following same steps.
Aach (Red) cable to the (2 B secon) and (secon 3 C) & align itproperly with the help of
cable guide clamp and aached with (5 E secon).
Cable code (blue)
Aach the cables and insert the hook onto the weight rod.
Autres manuels pour Fly 22
1
Ce manuel convient aux modèles suivants
1
Autres manuels PROAIM Matériel de construction
PROAIM
PROAIM Cinema P-21-JS Manuel utilisateur
PROAIM
PROAIM P-WV-2SD Manuel utilisateur
PROAIM
PROAIM P-18-JS Manuel utilisateur
PROAIM
PROAIM P-CMBD-S Manuel utilisateur
PROAIM
PROAIM CINEMA Series Manuel utilisateur
PROAIM
PROAIM JB-AS04-00 Manuel utilisateur
PROAIM
PROAIM CINEMA Series Manuel utilisateur
PROAIM
PROAIM P-WV-2PP Manuel utilisateur
PROAIM
PROAIM P-WV-2 Manuel utilisateur
PROAIM
PROAIM P-18-JS Manuel utilisateur
