LEDSOFT18
2
SAFETY
General instruction
• The products referred to in this manual conform to the European Community Directives and are there-
fore marked with .
• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.
Never make any modications on the unit not described in this instruction manual, otherwise you will
risk an electric shock.
• Connection must be made to a power supply system tted with ecient earthing (Class I appliance ac-
cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units
from indirect contact and/or shorting to earth by using appropriately sized residual current devices.
• The connection to the main network of electric distribution must be carried out by a qualied electrical
installer. Check that the main frequency and voltage correspond to those for which the unit is designed
as given on the electrical data label.
• This unit is not for home use, only professional applications.
• Never use the xture under the following conditions:
- in places subject to vibrations or bumps;
- in places with a temperature of over 50 °C.
• Make certain that no inammable liquids, water or metal objects enter the xture.
• Do not dismantle or modify the xture.
• All work must always be carried out by qualied technical personnel. Contact the nearest sales point for
an inspection or contact the manufacturer directly.
• If the unit is to be put out of operation denitively, take it to a local recycling
plant for a disposal which is not harmful to the environment.
Warnings and installation precautions
• If this device will be operated in any way dierent to the one described in this manual, it may suer
damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like
short circuit, burns, electric shock, etc.
• Before starting any maintenance work or cleaning the projector, cut o power from the main supply.
• The connection, installation and operation of LED screen should be processed as per instruction by
special person.
• Keep any inammable material at a safe distance from the unit.
• Install the unit in a well ventilated place.
• Never try to trample and tear the LED screen, keep the internal cable connection and electronic in order.
• Keep the hard or sharp article from lacerating the product.
• Prohibit sinking into the pouring water or other liquid.
• Handle with care when install and disassembly the LED screen to avoid the damage of the connecting
wire and other electronic component.
• The power cable should be connected to the power supply with ground.
• Prohibit connecting the power when LED screen was folded.
• Before nishing the installation, please do not connect the power.
• When there is wind, the display should be xed rmly with safe belt.
• When folding the LED screen, the surface of the curtain should be face to face.
• Please comply with the local relative regulations.
WARNING! Before carrying out any operations with the unit, carefully read this instruction
manual and keep it with cure for future reference. It contains important information about
the installation, usage and maintenance of the unit.
