Pro-Elec PEL00939 Manuel utilisateur

Model: PEL00939

2kW CONVECTOR HEATER

IMPORTANT SAFETY INFORMATION

Please read these instructions carefully before use and retain for future reference.

• Check that the voltage indicated on the rating plate corresponds with that of the local

network before connecting the appliance to the mains power supply.

• To avoid re or shock hazard, plug the appliance directly into a suitable 220-240V AC

electrical outlet. DO NOT use external timer, separate remote control system, and

extension cable or external adaptor with the appliance. Do not overload the circuit.

• This heater must not be located immediately below a socket-outlet.

• To disconnect the appliance, turn the control switch to “OFF” BEFORE removing the

plug from main power outlet.

• When unplugging, be sure to pull by the plug and not the cord.

• Always unplug the appliance when not in use.

• Discontinue use if plug or outlet becomes hot. It is recommended that the outlet be

checked and replaced if plug or outlet is hot to touch.

• DO NOT abuse or damage the power cord. Fully unwind the cord before use as a

coiled cord may overheat. Do not allow the supply cord to touch hot surfaces.

• DO NOT run cord under carpeting. DO NOT cover cord with throw rugs, runners,

or the like. Position the cord away from trafc area and where it will not cause a trip

hazard.

• Ensure that the supply cord is kept away from heat or sharp edges that could

cause damage.

• DO NOT insert or allow foreign objects to enter any ventilation or exhaust vent

opening as this may cause an electric shock or re, or damage to the appliance.

• DO NOT operate the appliance with a damaged cord or plug, or after the appliance

malfunctions, has been dropped or damaged in any manner. If the supply cord is

damaged, DO NOT attempt to service this appliance yourself. Return it to a qualied

service agent for mechanical adjustment, or repair.

WARNING: In order to avoid overheating, DO NOT COVER the heater.

• To prevent a possible re, DO NOT block air intakes or exhaust vents in any manner.

DO NOT use on soft surfaces, like a bed, where openings may become blocked.

• DO NOT move the appliance when it is operating. Only move the appliance when

cool.

• The appliance is hot when in use. To avoid burns, DO NOT touch any hot surfaces.

Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and

curtains at least 3 ft (0.9 m) from the front of the heater and keep them away from the

sides and rear.

• This appliance is not intended for use by persons (INCLUDING CHILDREN)

with reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction concerning use of

the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

• Do not use this heater in the immediate surroundings of a bath, or a shower.

• This appliance is not intended for use in bathrooms, laundry areas and similar indoor

location where this it may come in contact with water.

• Do not immerse any part of this appliance or supply cord in water.

• DO NOT use in areas where gasoline, paint, or ammable liquids are used or stored.

• This appliance is designed for indoors ONLY.

ASSEMBLY

Fitting the Feet

• Carefully turn the unit upside down.

Using the four 12mm screws provided,

afx the feet to the underside of the

heater (see right).

OPERATION

• Before connecting the appliance to the mains, make sure that all switches are set

to the “OFF” position.

• Insert the plug of the heater into the mains socket.

• Adjust the thermostat to a desired temperature level.

• Turn on the heating element using the two rocker switches on the side panel. They

will illuminate when the heating elements are on.

• Never pull on the cord when disconnecting from the mains.

Note: It is normal when the heater is turned on after a period of no use for it to emit

some odour. This will disappear after the heater has been on for a short time.

CLEANING & MAINTENANCE

• Always unplug the heater from the wall socket and allow it to cool down before

cleaning.

• Clean the outside of the heater by wiping it with a clean, damp cloth.

• Do not use any chemicals, abrasives or solvents that may damage the heater.

• Do not allow any water to enter the inner appliance.

• To store the heater, place it in a clean, dry environment, ensuring it is protected

from dust.

INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF

ELECTRICAL & ELECTRONIC EQUIPMENT

When this product has reached the end of its life it must be treated as Waste Electrical &

Electronics Equipment (WEEE). Any WEEE marked products must not be mixed with general

household waste, but kept separate for the treatment, recovery and recycling of the materials used.

Contact your local authority for details of recycling schemes in your area.

Made in China. PR2 9PP

Man Ref 1.1

SPECIFICATIONS

As with all portable heaters -

This product is only suitable for well insulated spaces or occasional use.

Model PEL00939 Heat Output

Rated Voltage 220-240VAC Nominal heat output Pnom 1.8-2.0kW

Frequency

50/60Hz Min heat output Pmin 0kW

Rated Power 1800-2000W Max heat output Pmax 2.0kW

Auxiliary electricity consumption

At nominal heat output elmax 0kW

At minimum heat output elmin 0kW

In standby mode elsb N/A

With mechanical thermostat room temperature control YES

Autres manuels pour PEL00939

Table des matières

Autres manuels Pro-Elec Chauffage

Pro-Elec

Pro-Elec PELL0213 Manuel utilisateur

Pro-Elec

Pro-Elec PELL0214 Manuel utilisateur

Pro-Elec

Pro-Elec PELL0205 Manuel utilisateur

Pro-Elec

Pro-Elec PEL00922 Manuel utilisateur

Pro-Elec

Pro-Elec PELL0216 Manuel utilisateur

Pro-Elec

Pro-Elec PEL00921 Manuel utilisateur

Pro-Elec

Pro-Elec PEL00495-UK Manuel utilisateur

Pro-Elec

Pro-Elec PEL00941 Manuel utilisateur

Pro-Elec

Pro-Elec PELL0214 Manuel utilisateur

Pro-Elec

Pro-Elec PELL0410 Manuel utilisateur

Pro-Elec

Pro-Elec PELL0004-WHT Manuel utilisateur

Pro-Elec

Pro-Elec PEL00562 Manuel utilisateur

Pro-Elec

Pro-Elec PEL00939 Manuel utilisateur

Pro-Elec

Pro-Elec PEL00920 Manuel utilisateur

Pro-Elec

Pro-Elec PEL00913 Manuel utilisateur

Pro-Elec

Pro-Elec PEL00917 Manuel utilisateur

Pro-Elec

Pro-Elec PELL0203 Manuel utilisateur

Pro-Elec

Pro-Elec PELL0208 Manuel utilisateur

Pro-Elec

Pro-Elec PELL0209 Manuel utilisateur

Pro-Elec

Pro-Elec PELL0211 Manuel utilisateur

Pro-Elec

Pro-Elec PEL00940 Manuel utilisateur

Pro-Elec

Pro-Elec PELL0214 Manuel utilisateur

Pro-Elec

Pro-Elec PEL00495 Manuel utilisateur

Pro-Elec

Pro-Elec PELL0210 Manuel utilisateur

Manuels Chauffage populaires d'autres marques

oventrop

oventrop Regucor Series Manuel utilisateur

Blaze King

Blaze King CLARITY CL2118.IPI.1 Manuel utilisateur

ELMEKO

ELMEKO ML 150 Manuel utilisateur

BN Thermic

BN Thermic 830T Manuel utilisateur

KING

KING K Series Mode d’emploi

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Guide de démarrage rapide

Well Straler

Well Straler RC-16B Manuel utilisateur

EUROM

EUROM 333299 Manuel utilisateur

Heylo

Heylo K 170 Manuel utilisateur

Eterna

Eterna TR70W Manuel utilisateur

Clarke

Clarke GRH15 Mode d’emploi

IRSAP

IRSAP The Radiator Company Ovali Manuel utilisateur

Empire Heating Systems

Empire Heating Systems WCC65 Manuel utilisateur

Wetekom

Wetekom 92 86 43 Manuel utilisateur

Desa

Desa SPC170-F Manuel utilisateur

Watlow

Watlow Watrod Electric Tubular Heaters Manuel utilisateur

Haverland

Haverland ECO-DRY GPS Series Manuel de la liste des pièces

Stelpro

Stelpro ASILVC2060 Series Manuel utilisateur