Pro-Elec PEL01935 Manuel utilisateur

IMPORTANT SAFETY INFORMATION

Please read these instructions carefully before use and retain for future reference.

• When using electrical appliances basic safety precautions should always be

followed.

• Check that the voltage indicated on the rating plate corresponds with that of the

local network before connecting the appliance to the mains power supply.

• This appliance is intended for domestic use only. It should not be used for

commercial purposes.

• This appliance can be used by children aged from 8 years and above and persons

with reduced physical, sensory or mental capabilities or lack of experience and

knowledge if they have been given supervision or instruction concerning the use of

the appliance in a safe way and understands the hazards involved.

• Children shall not play with this appliance.

• Cleaning and maintenance shall not be made by children without supervision.

• There are no user-serviceable parts in this product. Refer servicing to qualied

personnel.

• Do not operate this fan with a damaged plug or cord, after a malfunction or after

being dropped or damaged in any way.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service

agent or similarly qualied persons in order to avoid a hazard.

• Ensure that the fan is switched off before removing the guard.

• Do not insert anything through the grille when the fan is in use.

• Make sure that the fan is on a stable surface when operating.

• It is recommended to unplug the fan from the mains socket when not in use.

16” Desk Fan

Model: PEL01935

ASSEMBLY

• Make sure the main fan body is secured tightly to the base with the thumbscrew

under the base.

• Remove the four screws in the main body and reuse to attach the rear fan guard,

ensuring the handle is at the top.

• Slide the fan onto the axle screw rst and tighten the screw ensuring it is in contact

with the attened edge of the axle.

• Remove the bolt and nut from the

bottom of the front guard and rotate

all clips to an open position.

• Attach the front fan guard, ensuring

the bolt hole is aligned for the two

halves.

• Close the clips and replace the

nut and bolt locking the two halves

together.

OPERATION

• Connect the mains plug to a suitable outlet.

• Oscillation: In order to make the fan oscillate, push down the oscillation control.

To stop the fan head from oscillating, pull up the oscillation control.

• Select the desired speed using the speed control:

0 = device off

1 = Low speed

2 = Medium speed

3 = High speed

CLEANING & MAINTENANCE

• Before cleaning, switch the fan off and unplug from the power supply.

• To clean the fan, use a soft cloth to wipe off any dust. If the fan is very dirty, use a

damp cloth and wipe dry.

• Do not use any chemicals, abrasives or solvents that could damage the fan.

TECHNICAL SPECIFICATION

Power consumption 50W

Main voltage 220-240V~ 50Hz

Dimensions (HxWxD) 550 x 448 x 280mm

Weight 4.0kg

INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL &

ELECTRONIC EQUIPMENT.

When this product has reached the end of its life it must be treated as Waste Electrical

& Electronic Equipment (WEEE). Any WEEE marked products must not be mixed with

general household waste, but kept separate for the treatment, recovery and recycling of the

materials used. Contact your local authority for details of recycling schemes in your area.

Made in China. PR2 9PP

Man Rev 1.1

Fan

blade

Grille

Mains lead

Speed

control Motor

Oscillation

control

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Pro-Elec Ventilateur

Pro-Elec

Pro-Elec PEL00301 Manuel utilisateur

Pro-Elec

Pro-Elec PEL01926 Manuel utilisateur

Pro-Elec

Pro-Elec PEL00303 Manuel utilisateur

Pro-Elec

Pro-Elec PEL01920 Manuel utilisateur

Pro-Elec

Pro-Elec PEL01930 Manuel utilisateur

Pro-Elec

Pro-Elec TF-35 Manuel utilisateur

Pro-Elec

Pro-Elec PEL01937 Manuel utilisateur

Pro-Elec

Pro-Elec PEL01924 Manuel utilisateur

Pro-Elec

Pro-Elec TF-29GR Manuel utilisateur

Pro-Elec

Pro-Elec PEL01927 Manuel utilisateur

Pro-Elec

Pro-Elec PEL00294 Manuel utilisateur

Pro-Elec

Pro-Elec PEL01932 Manuel utilisateur

Pro-Elec

Pro-Elec PEL01936 Manuel utilisateur

Pro-Elec

Pro-Elec PEL01916 Manuel utilisateur

Pro-Elec

Pro-Elec PEL00305 Manuel utilisateur

Pro-Elec

Pro-Elec FT-40MC Manuel utilisateur

Pro-Elec

Pro-Elec PEL01922 Manuel utilisateur

Pro-Elec

Pro-Elec PEL01915 Manuel utilisateur

Pro-Elec

Pro-Elec FD-40M Manuel utilisateur

Pro-Elec

Pro-Elec PEL00309 Manuel utilisateur

Pro-Elec

Pro-Elec FT-15 Manuel utilisateur

Pro-Elec

Pro-Elec TF-29N Manuel utilisateur

Pro-Elec

Pro-Elec PEL01928 Manuel utilisateur

Pro-Elec

Pro-Elec HG00875 Manuel utilisateur

Manuels Ventilateur populaires d'autres marques

ELTA FANS

ELTA FANS H03VV-F Manuel utilisateur

Hunter

Hunter 20714 Manuel d'instructions

Emerson

Emerson CARRERA VERANDA CF542ORB00 Manuel utilisateur

Hunter

Hunter Caraway Manuel d'instructions

Panasonic

Panasonic FV-15NLFS1 Manuel utilisateur

Kompernass

Kompernass KH 1150 Manuel utilisateur

VES

VES FALA100/12V/TR Manuel utilisateur

Vertiv

Vertiv Liebert DCD Manuel utilisateur

Westinghouse

Westinghouse GFP Series Manuel utilisateur

Venmar

Venmar KUBIX HRV PLUS Series Manuel utilisateur

Maico

Maico ECR 31 Manuel utilisateur

Sonnenkonig

Sonnenkonig Dinky Manuel utilisateur

S&P

S&P ECOWATT HXBR Manuel utilisateur

Wider

Wider IMP03369BH Manuel utilisateur

Panasonic

Panasonic F-60DHN Manuel utilisateur

Hinkley

Hinkley HIGHLAND Manuel utilisateur

Broan

Broan 766BN Manuel utilisateur

Premium

Premium PFS16022 Instructions de montage