Primera Signature II Caractéristiques techniques

SECTION II: RECORDING AND PRINTING

1. It is necessary to record and print the cards in two separate steps.

To record, first load the input bin with 35 blank CD-R Business

Cards. Next, create your recording job as described in the

Duplicator User’s Manual making sure to disable the Print option in

Prassi’s Recording Job Window.

2. Once your Business Cards have finished recording, reload them in

the input bin for printing. To print your card, use one of the software

templates included disc. In the driver you will need to enable the

Manual Load option and disable Clip Inner Circle as shown below.

Figure 4: Manual Load Figure 5: Clip Inner Circle

Please refer to the Duplicator Operator’s Manual for the rest of

the set-up procedure.

PN 510116-020121

Operator Instructions:

Business Card Adapter Kit

For Use with Composer™ Optical Disc Duplicator or

Conductor™ Printer Autoloader

Two Carlson Parkway North •Plymouth, MN 55447-4446 •U.S.A.

Phone: 1-800-797-2772 •763-475-6676 •FAX: 763-475-6677

Web: www.primeratechnology.com

This sheet describes the installation and use of the CD-R Business Card

Adapter Kit for the Composer™ Optical Disc Duplicator and Conductor™

Printer Autoloader (referred to hereafter as the “Duplicator”).

NOTE: For printing purposes, the Business Card Adapter Kit is designed

to work best with the Signature®IV and SignaturePro®CD Color Printers

from Primera (referred to hereafter as “Printer”).

SECTION I: INSTALLATION

1. Make sure that in this box you have the following items:

• CD Business Card Input Bin

• Output Spindle

• CD-R Drive Ring

• CD Business Card Tray Template Assembly (2 pieces)

• 5 Printable Surface CD Business Cards

• Card CD-R Containing Software Templates

Figure 1: Input /Output Bins

2. Place Output Spindle in the center of the Output Bin on the left side

of the Duplicator.

3. Remove original Input Bin and place the CD Business Card Input Bin

on the right side of the Duplicator.

4. Install the CD Business Card Clamp Assembly in the Printer Tray as

shown below. The Front Template has molded pegs that mate with

locating holes found toward the front of the printer tray. The molded

Hook on the underside of the Rear Template rests on the metal

clamp located to the rear of the printer tray. When properly

installed, The metal clamp moves the Rear Template forward to hold

the card in place as the tray retracts into the printer.

Figure 2: CD Business Card Clamp Assembly

5. Install the CD-R Drive Ring in the CD-R Drive Tray as shown.

Figure 3: CD-R Drive Ring

6. Please note that it may be necessary re-align the Printer on your

Duplicator. Please refer top the Printer Alignment section in the Optical

Disc Duplicator User’s Manual. Once the printer is aligned, you are

ready to record and print CD-R Business Cards.

Business Card

CD-R Input Bin

Output Spindle

Autres manuels Primera Accessoires pour imprimantes

Primera

Primera LX400 Manuel utilisateur

Primera

Primera Bravo Pro Manuel utilisateur

Primera

Primera ADL-MAX Manuel utilisateur

Primera

Primera Bravo II Mode d’emploi

Primera

Primera Conductor Conductor Printer Manuel utilisateur

Primera

Primera Bravo II Manuel utilisateur

Primera

Primera PN 510725-121304 Caractéristiques techniques

Primera

Primera OptiVault Manuel utilisateur

Primera

Primera Bravo Pro Manuel utilisateur

Primera

Primera Impressa 3 Manuel utilisateur

Primera

Primera Disc Autoloader ADL-MAX Manuel utilisateur

Primera

Primera Label Stock Manuel utilisateur

Primera

Primera AP-CODE Manuel utilisateur

Primera

Primera OptiVault Manuel utilisateur

Primera

Primera RW-12 Manuel utilisateur

Primera

Primera LX-REWINDER Manuel utilisateur

Primera

Primera Ink Jet Printers Manuel utilisateur

Primera

Primera OptiVault Manuel utilisateur

Manuels Accessoires pour imprimantes populaires d'autres marques

Star Micronics

Star Micronics TSP800 Series Manuel utilisateur

REA

REA JET HR pro 2K Manuel utilisateur

HP Laserjet,Color Laserjet 4si Manuel utilisateur

oliser

oliser MS 45 Manuel utilisateur

Roland

Roland DU2-64 Instructions et recettes

Xerox

Xerox EFI EXP6000 Manuel utilisateur

Canon

Canon Finisher-T1 Manuel utilisateur

Sharp

Sharp FO-1MK Manuel utilisateur

Labelmate

Labelmate PM-300 Manuel utilisateur

Epson

Epson T6248 Manuel d'utilisation

Epson

Epson OT-BZ20 Manuel utilisateur

Canon

Canon TonerRobot EP-27 Manuel utilisateur

Ricoh

Ricoh LCIT RT5100 Guide de démarrage rapide

GBC

GBC 16 Series Manuel utilisateur

Canon

Canon INNER 2-WAY TRAY-E1 Manuel d'utilisation et d'entretien

Develop

Develop SD-509 Manuel utilisateur

Kyocera

Kyocera KM-6230 Manuel

Triumph Adler

Triumph Adler DF-710 Manuel