Pride Mobility SilverStar SilverBoom 300 Manuel utilisateur

SilverBoom 300SilverBoom 300

SilverBoom 300

www.pridemobility.com SilverBoom300

SAFETY GUIDELINES

PrideMobilityProductsCorp.

INFMANU3210/RevB/August2006

The symbols below are used throughout this owner's manual and on the product to identify warnings and

important information. It is very important for you to read them and understand them completely.

WARNING! Failure to follow designated procedures can cause either personal injury,

component damage, or malfunction (black symbol on yellow triangle with black border).

MANDATORY! These actions should be performed as specified. Failure to perform

mandatory actions can cause injury to personnel and/or damage to equipment (white

symbol on blue dot with white border).

PROHIBITED! These actions should be prohibited. These actions should not be performed

at any time or in any circumstances. Performing a prohibited action can cause injury to

personnel and/or damage to equipment (black symbol with red circle and red slash).

Please fill out the following information for quick reference:

PrideProvider:_____________________________________________________________________

Address:__________________________________________________________________________

PhoneNumber:____________________

Purchase Date:____________________ SerialNumber:_________________________________

NOTE: This owner’s manual is compiled from the latest specifications and product information avail-

able at the time of publication. We reserve the right to make changes as they become necessary. Any

changes to our products may cause slight variations between the illustrations and explanations in this

manual and the product you have purchased.

3SilverBoom300

CONTENTS

I. INTRODUCTION......................................................................................................................... 4

II. SAFETY......................................................................................................................................... 6

III. INSTALLATION .......................................................................................................................... 8

IV. OPERATION............................................................................................................................... 14

V. TROUBLESHOOTING............................................................................................................ 16

VI. WARRANTY................................................................................................................................17

4SilverBoom300

WelcometoPrideMobilityProductsCorporation(Pride).CongratulationsonthepurchaseofyournewSilverBoom

300.TheSilverBoom300designcombinesthe most advanced state-of-the-art componentswithmodern,attrac-

tivestyling.Wearecertainthatthedesignfeaturesandtrouble-free operation will add convenience to yourdaily

livingandensurecompletesatisfaction.

AtPride,yoursafetyisimportantto us. Pleasereadandfollowallinstructionsinthismanualbeforeoperat-

ingyourSilverBoom300 forthe firsttime.These instructions were produced for your benefit.Your under-

standingofthese instructions isessentialforthesafeoperation ofyournewSilverBoom300.

Prideisnot liable for damage topropertyorpersonal injury arising out oftheunsafe use of a PrideSilverBoom

300.Pride isalsonotliable foranypropertydamage orpersonalinjuryarisingoutofthefailureofanypersonand/

oruser tofollowtheinstructionsandrecommendationssetforthinthismanual oranyotherinstructions orrecom-

mendationscontainedinotherSilverBoom300relatedliteratureissuedbyPrideorcontainedonthePrideSilverBoom

300itself.

INTERNET AND PRIVATE PURCHASES

Ifyoupurchasedyour product over the internet orfromapreviousownerand you have any questions aboutthe

safeuse and/ormaintenanceofthe product,pleasevisitPride’s websitewww.pridemobility.comor contactyour

authorizedPride Provider.

PURCHASER’S AGREEMENT

Byacceptingdeliveryofthisproduct,youpromisethatyouwillnotchange,alter,ormodifythisproductorremove

orrender inoperableorunsafe anyguards,shields,orothersafetyfeaturesofthisproduct; fail,refuse,orneglectto

installanyretrofitkitsfromtimetotimeprovidedbyPridetoenhanceorpreservethesafeuseofthisproduct.

INFORMATION EXCHANGE

We want to hearyourquestions,comments,andsuggestionsaboutthis manual.Wewouldalso like to hear about

thesafetyandreliabilityofyournewSilverBoom300,andabouttheserviceyoureceivedfromyourauthorized

PrideProvider.

Pleasenotifyusofanychangeofaddress, sowecan keepyouapprised ofimportantinformationaboutsafety,new

products,and newoptionsthatcanincrease yourabilitytouse andenjoyyourSilverBoom 300.Pleasefeelfreeto

contactus at the address below:

PrideMobilityProducts Corporation

Attn.:CustomerCare Department

182SusquehannaAve.

Exeter, PA18643-2694

customercare@pridemobility.com

800.424.8205

NOTE: If you ever lose or misplace your product registration card or your copy of this manual, contact

us and we will be glad to send you a new one immediately.

I. INTRODUCTION

5SilverBoom300

PRIDE OWNERS CLUB

Asan ownerofaPrideproduct,youareencouragedtoenrollinthePrideOwnersClub.Completeand returnyour

enclosedproductregistrationcardorvisitPride'swebsiteat www.pridemobility.com.Asaregisteredmember,

eachtimeyou visit oursite,youhaveaccessto the mostinteractive,educationalvenueavailabletoday for people

withmobilityneeds,theirfamilies,andfriends.

From our home page, select “Owners Club” to enter a page dedicated to current and potential Pride product

owners.Youwillgainaccesstointerviews,stories,recreationideas,dailylivingtips,productandfundinginforma-

tion,andinteractive messageboards.Thesemessageboardsinvite youtocommunicatewithotherPride custom-

ersaswellas Pride representatives who areavailabletoassistyouwithanyquestionsorconcerns you may have.

I. INTRODUCTION

6SilverBoom300

II. SAFETY

PRODUCT SAFETY SYMBOLS

Thesymbolsbelow areusedontheliftsystem to identifywarnings,mandatoryactions,and prohibited actions.It

isveryimportantfor you to readandunderstandthemcompletely.

Read and follow the information in the owner’s manual.

Pinch/Crush points created during assembly and/or operation.

Maximum lifting capacity.

Do not lift pets.

Do not lift people.

Do not sit on mobility device while operating the lift system or during

transport.

7SilverBoom300

LIFTING CAPABILITIES

TheSilverBoom300isdesignedtoliftamaximumweightof300lbs.(136kg).Undernocircumstancesshouldthe

SilverBoom300bemadetoexceedthisweightlimit.SubjectingtheSilverBoom300tothestrainofhoistingmore

than it isdesigned to lift, maycause it tofail, resultingin damage to the mobilitydevice and/or injury to thelift

operator.Refertothemobilitydeviceowner’smanualforinformationontheoverallweightofthemobilitydevice

beforeliftingwiththeSilverBoom300.

WARNING! Adding accessories, oversize batteries, or a different seat will increase the

weight of your mobility device. Verify with your authorized Pride Provider that the total

weight of your mobility device, including the additions, does not exceed 300 lbs (136 kg).

INSTALLATION

YourSilverBoom300liftsystemwasdesignedtobemountedprimarilyinamotorvehicle.MountingyourSilverBoom

300onaplatform,wheretheheight oftheliftmaycausetheliftingstrap toextendbeyondasafepoint,candamage

the SilverBoom 300 and injure the operator of the lift. The distance between the top of the boom-arm and the

mobilitydeviceshould not exceed 70in(178cm)whentheboom-armis fully extended.

Read and fully understand the directions for drilling the mounting holes for the SilverBoom 300 base before

installingtheliftsystem.

WARNING! Before drilling the mounting holes in your vehicle, make absolutely certain

through a visual inspection that there are no obstructions in the path of the drill bit, such

as the fuel tank, exhaust pipes, or electrical wires.

LIFTING NON-PRIDE ITEMS

The SilverBoom 300 is an extremely versatile device, which users may employ to lift items other than Pride

products.Pridehasnocontroloversuchuse,norcanPride anticipate every possible use to which a SilverBoom

300may beput.Liftingnon-Prideproducts withtheSilverBoom300isdoneattheoperator’sownrisk,andPride

acceptsno liabilityfordamage orinjuryresultingfromsuchuse.

PRELIFT INSPECTION

Inspectthe liftingstrapoftheSilverBoom300beforeeveryuse fortwisting,fraying,and signsofwear.Ifsignsof

wearbecomeevident,havethestrap replaced by your authorized Pride Provider.

WARNING! A frayed or worn lifting strap can snap, resulting in damage to the mobility

device being lifted and injury to the lift operator.

OPERATOR POSITIONING

KeephandsclearoftheliftingstrapwhiletheSilverBoom300islifting/loweringamobilitydevice.Theoperatorof

theliftshouldstandasafedistancefromtheunitbeinglifted/loweredtoensurethathis/herfeetareneverpositioned

undera raisedmobilitydevice.

TRANSPORT VEHICLE POSITIONING

Besure yourvehicleisparkedonflat,levelgroundand theemergencybrakeis engagedbeforeattemptingto lifta

mobilitydevice.

WARNING! Attempting to lift a mobility device when a vehicle is not on level ground will

cause the mobility device to swing toward or away from the vehicle, making it difficult to

get the mobility device into the vehicle.

II. SAFETY

8SilverBoom300

III. INSTALLATION

The SilverBoom 300 can be installed in either side of

yourvehicle.Theillustrationsdemonstrateinstallationon

therightside.

NOTE: Most roads have a crown to help with wa-

ter runoff. However, if the crown is severe enough,

it may cause difficulty getting your mobility device

into the vehicle. In this case, it may be better to

install the lift on the left side.

DETERMINE L-BASE LOCATION

1. Assemble the L-Base. See figure 1. For optimal

use, insert the base extensions into the L-base at

theirfarthestextensionpointandinstallthehardware

(nuts and bolts). The base extensions can be ad-

justedtoaccommodateobstructions.

NOTE: Always insert the bolt from the inside of

the L-base. This allows the base extensions to be

properly tightened without rattling.

2. Before permanently installing thelift,place the L-

baseinside yourvehicleintheareainwhichyouin-

tendto installit.Seefigure2for L-basepositioning

in vehicles with hatchbacks, or figure3 for trunk

installation.

NOTE: Positioning the L-base close to the rear

allows the boom-arm to stay as short as possible;

this enables the boom-arm to swing freely without

making contact with the motor vehicle.

VEHICLES WITH TRUNKS

Position the L-base as shown in figure 3. You may

need to situate the L-base so the wheel well does not

interfere with the L-base extensions. Ensure there is

adequateroomforamobility device to comfortably fit

intothetrunk.

Figure 2. L-Base (Hatchback Installation)

Figure 3.L-Base (Trunk Installation)

WHEELWELL

Figure 1. L-Base Extensions

BASE EXTENSIONS

NUT

L-BASE

BOLT55MM(2.5”)

9SilverBoom300

Figure 6. Motor Housing Installation

ASSEMBLING THE LIFT

1. Insert the upperpostinto the L-base. Seefigure4.

2. Slide the height adjustmentring(seefigure5)over

theupperpostandtightenthesetscrew(agoodstart-

ing point is approximately 12 in. (30.5 cm) down

from the top of the upper post). See figure 4. To

ensuresafeoperation,theheightadjustmentringmust

besecurednocloser than 6 in. (15cm)fromthetop

ofthe upper post.

WARNING! Failing to tighten the

height adjustment ring setscrew

could cause damage to your lift,

mobility device, and vehicle.

NOTE: The height adjustment ring may need to be

adjusteddown sothe boom-armhas sufficienthead

room to swing into a vehicle, or adjusted up so the

mobilitydevice beinglifted hasample roomto clear

obstructions.

3. Lowerthemotorhousingovertheupperpostuntilit

restsontheheight adjustment ring. See figure6.

WARNING! Pinch Point Hazard! Keep

hands clear of the upper post when

lowering the motor housing.

WARNING! The lift will be top heavy

until mounted securely. Get

assistance to help stabilize the lift

while swinging the boom-arm.

VEHICLES WITH HATCHBACKS-

MINIVANS, STATION WAGONS, ETC.

Once the lift is assembled and seated on the L-base,

close the hatch slowly to make sure it does not make

contactwith it.Ifthelift istoocloseto therear,adjustits

positionslightlyuntilthehatchcanclosewithoutmaking

contactwiththelift.PositioningtheL-basecloseto the

rear allows the boom-arm to stay as short as possible.

Thisenablesthelifttoswingintothevehiclewithoutcon-

tactingthefar sideofthevehicle.

Youmay needtoadjusttheheightofthe motor housing

(see figures 6 and 7) or the length of the boom-arm

(seefigure 8)sothe boom-arm can swingfreelywith-

outhittingatanypointinsidethevehicle.

L-BASE

UPPER POST

HEIGHTADJUSTMENTRING

Figure 4. Upper Post Installation

MINIMUMOF6”(15CM)

Figure 5. Height Adjustment Ring Assembly

SETSCREW

III. INSTALLATION

10 SilverBoom300

MOTOR HOUSING HEIGHT ADJUSTMENT

Theplacementof theheightadjustmentringdetermines the

heightofthemotorhousing. Seefigure7.

"Lowertheringwhenmoreroomisneededoverheadto

swingthe boom-arminsideavehicle.

"Raisethe ring when more heightis needed toenable a

mobilitydevice tobeliftedintoa trunk.

Toadjusttheheightadjustmentring:

1. Loosen the setscrew on thering.Seefigure 7.

2. Raise or lower theringtothenecessaryheight.

3. Tightenthesetscrew.

BOOM-ARM ADJUSTMENT

Beforeadjustingtheboom-arm,lowertheliftinghookabout

12in.(30.5cm).Thiswill provide enoughslackinthestrap

toenabletheadjustableportionofthe boom-arm (top tube)

tobepulledout of thebottomtubetoitsfarthestadjustment

hole. See figure 8.

Toadjusttheboom-arm:

1. Remove the bow tie cotterpinfromtheadjustmentpin

andremovethe adjustmentpin.

2. Slide the top tube in or out to the desired adjustment

hole.

3. Align the adjustmentholes of thetop and bottomtube

andreinsertthe adjustmentpin.

NOTE: Do not force the pin into the adjustment hole.

Be sure that the strap is not pinched when inserting

the pin.

4. Reinstallthebowtiecotterpinintotheadjustmentpinto

securetheboom-arm.

ADJUSTMENT PIN

TOP TUBE

LIFTING HOOK

ADJUSTMENT HOLES

BOTTOM TUBE

Figure 7. Height Adjustment Ring Position

Figure 8. Boom-arm Adjustment

BOW TIE COTTER PIN

III. INSTALLATION

SETSCREW

HEIGHTADJUSTMENTRING

SECURENOCLOSERTHAN6”(15CM)

FROM THE TOP OF THE POST.

L-BASE INSTALLATION

Afterdeterminingtheidealspotfor your lift to be permanently mounted,removetheentireliftfromthevehicle

exceptfor the L-base.

1. Inspect the undercarriage of thevehiclewheretheliftL-base is located for obstructions thatmayhinderthe

installationofthefive(5)mountingboltsthatwillsecuretheL-basetothevehicle.Obstructionsmayconsistof

electricalwiring,gastank, bumper mounts,or exhaust pipes.Youmayneedto adjustthe base extensions to

clearobstructions.Ifpossible,installtheL-basewiththebaseextensionsfullyextended.Seefigure9.

WARNING! Explosive Conditions Hazard! The bumper mounts on some vehicles are gas

pressured. DO NOT drill into them. They may explode casing severe injury.

Manuels Accessoires automobiles populaires d'autres marques

James Baroud

James Baroud Odyssey Manuel utilisateur

Motorola

Motorola i50sx Manuel utilisateur

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manuel utilisateur

Feniex

Feniex T3 Manuel utilisateur

Renault

Renault 77 11 423 180 Manuel utilisateur

Kia

Kia E8300-4D000 Manuel utilisateur

Brink

Brink 756843 Manuel utilisateur

Whispbar

Whispbar K085W Manuel utilisateur

v.link

v.link CI-VL2-PC-HSD Manuel utilisateur

Viking

Viking Stack-Rack Guide de configuration rapide

Aries

Aries 203015 Manuel utilisateur

Choetech

Choetech AT0005 Manuel utilisateur

ZZ2

ZZ2 ZZAIR-PRO Manuel utilisateur

Holman

Holman 4A80L Manuel utilisateur

Thule

Thule 2075 Manuel utilisateur

Motorola

Motorola T325 Manuel utilisateur

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guide d'installation

DV8

DV8 FBJL-02 Manuel utilisateur