All in one HD Video Conference Terminal User Guide
8
⚫output the video image: use the HDMI cable HDMI connection terminal OUT1 interface to
the display device interface HDMI inputs.
⚫output voice: use the HDMI cable HDMI connection terminal OUT1 interface to the
display device of the HDMI input interface,
⚫Or connect the AUDIO OUT interface of the terminal to the speaker using a 3.5mm
AUDIO cable.
⚫output in the first two video image: use the HDMI cable HDMI connection terminal OUT2
interface to the display device interface HDMI inputs.
⚫to connect to the Internet: using.net interface wiring terminal, the terminal access
network.
⚫connect power: use the DC 12 v power supply cord connected to form a complete set of
power adapter, and then connect the power adapter to the power socket.
2.1 Power On
Connect all equipment used in conjunction with the conference terminal
before switching on the power.
⚫When the terminal power is on, please prevent the power cord plug from leaving the
terminal and the terminal power is off.
⚫Please close the terminal first, then turn off the external power supply, and finally pull out
the power cord. Please check whether the power cord and the power adapter are
properly and reliably connected to the corresponding equipment as required below.
⚫Determine the ac power voltage range between 100V and 240V, and the frequency is
50Hz or 60Hz.
