PRESONUS FIREPOD Mode d'emploi

PreSonus Audio | T. 225-216-7887 | www.presonus.com

How to use up to three FIREPOD’s with Windows XP

You can use up to three Firepods on the same system over a single Firewire connection. In order to use multiple Firepods

together you must first download and install the latest driver, and run the firmware updater included with that driver for

each Firepod. Once the drivers and firmware are up to date, using multiple Firepod’s is easy.

Control Panel:

The control panel includes drop down menus to select

samplerate, latency, and clock source, as well as an Active

Units Panel.

Which Unit is Which?:

To determine which position each Firepod is in, you will

need to switch the clock source to SPDIF 1, SPDIF 2, or

SPDIF 3 and look at the Firepods to see which one has a

sync light that is flashing red/blue, indicating that it is

searching for SPDIF sync (make sure no SPDIF

connections are made yet). The number behind each

SPDIF selection refers to the position of the unit in the

Active Units Panel. The position of each unit will

determine which set of inputs/outputs the unit provides in

your DAW software (ex; position #1 = inputs/outputs 1-

10).

Active Units Panel::

The Active Units Panel can be used to change the name of the units for easy recognition (click on the unit you wish to

rename, and click on ‘Edit name’), and to change the order in which the units will appear in your software. For instance,

if you have one Firepod in a rack above another one and you would like it to appear first in the chain (inputs/outputs 1-

10 in your DAW software), you can move it to position #1 in the Active Units Panel if it is not already there. To change

the position of any Firepod, click on it in the Active Units Panel and click on ‘Up’ or ‘Down’.

Add a Third Firepod anytime:

If you already have two Firepods, you can very easily add another to your system. Just chain the new Firepod to the open

Firewire port on your existing Firepod and turn it on. The new driver will automatically install the new unit, and will

guide you through a single install screen. Once the new Firepod is installed, disconnect all Firepods except for the

newest Firepod, wait until you see a blue sync light, and then run the Firmware updater from the Programs list (PreSonus

1394 Audio Driver V.2.14.0 (Firepod)/Firmware Updater). When the firmware updater is finished, reconnect all

Firepods and turn them on. Once all are in sync, you should see them listed in the Active Units Panel in the Control

Panel, as well as in your DAW software.

Note:

- Multi-FIrepod operation is limited to sample rates of 24-bit/44.1k or 24-bit/48k.

- SPDIF is disabled in any multi-FIREPOD system

Autres manuels pour FIREPOD

Table des matières

Autres manuels PRESONUS Équipement d'enregistrement

PRESONUS

PRESONUS INSPIRE 1394 Manuel utilisateur

PRESONUS

PRESONUS FIRESTUDIO - V 3.0 Manuel utilisateur

PRESONUS

PRESONUS AudioBox GO Manuel utilisateur

PRESONUS

PRESONUS Studio 26c Manuel utilisateur

PRESONUS

PRESONUS BLUEMAX - Manuel utilisateur

PRESONUS

PRESONUS Quantum 4848 Manuel utilisateur

PRESONUS

PRESONUS FADERPORT Manuel utilisateur

PRESONUS

PRESONUS QUANTUM 2 Manuel utilisateur

PRESONUS

PRESONUS AudioBox Stereo Manuel utilisateur

PRESONUS

PRESONUS Quantum2626 Manuel utilisateur

PRESONUS

PRESONUS Studio 24c Manuel utilisateur

PRESONUS

PRESONUS FIRESTUDIO LIGHTPIPE - V2.0 Manuel utilisateur

PRESONUS

PRESONUS CL 44 Manuel utilisateur

PRESONUS

PRESONUS STUDIO LIVE RACK EAR Manuel utilisateur

PRESONUS

PRESONUS Central Station Plus Manuel utilisateur

PRESONUS

PRESONUS FIRESTUDIO MOBILE - SCHEMA Manuel utilisateur

PRESONUS

PRESONUS AudioBox Stereo Manuel utilisateur

PRESONUS

PRESONUS Revelator io24 Manuel utilisateur

PRESONUS

PRESONUS Studio 1810c Manuel utilisateur

PRESONUS

PRESONUS FIREPOD Manuel utilisateur

PRESONUS

PRESONUS Revelator io44 Manuel utilisateur

PRESONUS

PRESONUS FIRESTUDIO LIGHTPIPE - V2.0 Manuel utilisateur

PRESONUS

PRESONUS VXP - Manuel utilisateur

PRESONUS

PRESONUS FIRESTUDIO MOBILE - SCHEMA Manuel utilisateur

Manuels Équipement d'enregistrement populaires d'autres marques

KV2 Audio

KV2 Audio 500 Series Manuel utilisateur

Robotics Technologies

Robotics Technologies microBus-Cam II Manuel utilisateur

Seca

Seca 460 Manuel utilisateur

Cognex

Cognex MVS-8000 Series Manuel utilisateur

Mect

Mect MPNC006 Series Manuel utilisateur

Bad Caf

Bad Caf THE LEASH Manuel utilisateur

Strymon

Strymon NIGHTSKY Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manuel utilisateur

Tews Technologies

Tews Technologies TPMC465 Manuel utilisateur

Honeywell

Honeywell Excel 50 Manuel utilisateur

SeaLevel

SeaLevel COMM+8.LPCI Manuel utilisateur

Arturia

Arturia AUDIOFUSE STUDIO Manuel utilisateur

Rukra

Rukra RK-1240 Manuel utilisateur

Samson

Samson SCOM Manuel utilisateur

Dynacord

Dynacord DPS260 Manuel utilisateur

Nice

Nice Core Manuel utilisateur

Pyle Pro

Pyle Pro PSS8 Manuel utilisateur

RF-System

RF-System TinyGate Manuel d'utilisation et d'entretien