PRESONUS FIREPOD Mode d'emploi

PreSonus Audio Electronics | T. 225-216-7887 | www.presonus.com

How to use up to 3 FIREPOD’s on MacOSX Tiger 10.4.2:

General:

Support for 3 FIREPODS being used together on the same Macintosh Computer is given through

the OSX version 10.4.2 ‘Tiger’, using the Aggregate Device Editor within Audio Midi Setup.

With the Aggregate Device Editor, you can combine the 3 FIREPODS into a single device for use

in your DAW software.

When Using 2 FIREPODS:

Only 44100 and 48000 sample rates (format) will function. Do not choose a sample rate higher

than 48000. Sample rates for all FIREPODS must match each other and the sample rate setting in

your DAW software.

SPDIF inputs are not functional, do not switch clock source to SPDIF. (SPDIF outputs are

functional).

How to use the Aggregate Device Editor:

1.) Connect one FIREPOD to the computer with a Firewire cable. Then, chain another FIREPOD to

the first one with another Firewire cable (and another one to that FIREPOD if applicable)

2.) Turn on another FIREPOD, you should see a solid blue sync light on both units. (Then turn on a

third FIREPOD, if applicable. You should see a blue sync light on all 3 units).

3.) Open your Finder window and navigate to Applications/Utilities/Audio Midi Setup (AMS). Open

AMS.

PreSonus Audio Electronics | T. 225-216-7887 | www.presonus.com

4.) Select each FIREPOD in Properties For: and make sure the Clock Source is set to ‘Device’. Be

sure that all devices are set to the same Format (only 44100 and 48000 can be selected for proper

functionality when using multiple FIREPODS).

5.) In the menu at the top of the screen, go to ‘Audio’. Select ‘Aggregate Device Editor’ from the

menu.

6.) In the Aggregate Device Editor, click on the ‘+’ symbol to create a new aggregate device.

7.) Check the Use box for each FIREPOD, and leave the default clock selection as it is.

PreSonus Audio Electronics | T. 225-216-7887 | www.presonus.com

8.) You have now created an aggregate device from the FIREPODS. Click Done. Note that you can

rename the aggregate device to be anything you like.

The first FIREPOD for which

you check ‘USE’ will appear

first in your software (channels

1-8), regardless of the order in which the two

FIREPODS are connected to the computer.

9.) You can now choose the ‘Aggregate Device’ in your DAW software (such as Cubase), which will

use the analog inputs and all outputs of all FIREPODS in the aggregate device you have created.

Autres manuels pour FIREPOD

4

Ce manuel convient aux modèles suivants

1

Table des matières

Autres manuels PRESONUS Équipement d'enregistrement

PRESONUS

PRESONUS StudioLive 16.0.2 Manuel utilisateur

PRESONUS

PRESONUS V-FIRE - V1.0 Manuel utilisateur

PRESONUS

PRESONUS DigiMax FS Manuel utilisateur

PRESONUS

PRESONUS FIREPODOD Manuel utilisateur

PRESONUS

PRESONUS Studio 1824 Manuel utilisateur

PRESONUS

PRESONUS AudioBox GO Manuel utilisateur

PRESONUS

PRESONUS NSB Series Manuel utilisateur

PRESONUS

PRESONUS QUANTUM 2 Manuel utilisateur

PRESONUS

PRESONUS FaderPort 8 Manuel utilisateur

PRESONUS

PRESONUS FIRESTUDIO - V 3.0 Manuel utilisateur

PRESONUS

PRESONUS Studio 26c Manuel utilisateur

PRESONUS

PRESONUS BLUEMAX - Manuel utilisateur

PRESONUS

PRESONUS FIRESTUDIO MOBILE - SCHEMA Manuel utilisateur

PRESONUS

PRESONUS FIREBOX Manuel utilisateur

PRESONUS

PRESONUS CL 44 Manuel utilisateur

PRESONUS

PRESONUS AudioBox 22VSL Manuel utilisateur

PRESONUS

PRESONUS studiolive III series Manuel utilisateur

PRESONUS

PRESONUS AudioBox GO Manuel utilisateur

PRESONUS

PRESONUS FIRESTUDIO LIGHTPIPE - V2.0 Manuel utilisateur

PRESONUS

PRESONUS AudioBox Stereo Manuel utilisateur

PRESONUS

PRESONUS Quantum 4848 Manuel utilisateur

PRESONUS

PRESONUS 1BOX - Manuel utilisateur

PRESONUS

PRESONUS Studio 1810c Manuel utilisateur

PRESONUS

PRESONUS AudioBox Stereo Manuel utilisateur

Manuels Équipement d'enregistrement populaires d'autres marques

KV2 Audio

KV2 Audio 500 Series Manuel utilisateur

Robotics Technologies

Robotics Technologies microBus-Cam II Manuel utilisateur

Seca

Seca 460 Manuel utilisateur

Cognex

Cognex MVS-8000 Series Manuel utilisateur

Mect

Mect MPNC006 Series Manuel utilisateur

Bad Caf

Bad Caf THE LEASH Manuel utilisateur

Strymon

Strymon NIGHTSKY Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manuel utilisateur

Tews Technologies

Tews Technologies TPMC465 Manuel utilisateur

Honeywell

Honeywell Excel 50 Manuel utilisateur

SeaLevel

SeaLevel COMM+8.LPCI Manuel utilisateur

Arturia

Arturia AUDIOFUSE STUDIO Manuel utilisateur

Rukra

Rukra RK-1240 Manuel utilisateur

Samson

Samson SCOM Manuel utilisateur

Dynacord

Dynacord DPS260 Manuel utilisateur

Nice

Nice Core Manuel utilisateur

Pyle Pro

Pyle Pro PSS8 Manuel utilisateur

RF-System

RF-System TinyGate Manuel d'utilisation et d'entretien