Work Safety Instructions
Utilisation
This machine is designed for cutting of a stump, i.e. its above-ground part and in a max.
depth of 20 cm under the ground level. This machine cannot be used for cutting of dozy
stumps which could be released and pulled out under the blades. Avoid any cutting if
there can be stones, metallic objects etc. hidden in the stump and also bucking of free
stems.
Generally
-This machine can be operated only by an operator that is over 18 yrs old,
physically and mentally capable and demonstrably instructed with its operation.
-Keep this machine beyond children's and unauthorised person's reach.
-The operator of the machine is fully responsible for any injury or damage caused
to the third persons within the operating reach of the machine.
-Before working learn all functions of the machine and its particular controls.
-At work in residential zones use the machine in accordance with regulations of the
local authorities to avoid disturbing local inhabitants.
-This product is not designed for motion on public roads. It can be transported
only on a such trailer which is designed for this purpose.
-While working wear always personal protective aids - safety helmet with protecting
shield, protective gloves, working shoes, industrial protective clothing properly
buttoned.
-This manual includes also some common troubles and failures which could occur
and which are easy to be remedied by an instructed person. Other problems and faults
should be announced directly to the manufacturer who is always ready to helpyou.
-It is not allowed to do any technical changes or any actions which are neither given
in this manual nor allowed by the manufacturer. The machine, not correctly installed
or adjusted, may run without problems now but in the future it could damage any of
its important parts.
-Do not put any objects or tools on the machine.
-The manufacturer does not bear any responsibility for any damages or injures to the
third persons or to other equipment resulted from disobedience to instructions given
in this manual.
-When turning off the machine do not leave the switch key in the ignition box.
-When handing the machine over make sure if all controls, guards and other safety
elements are complete.
-Never remove guards and other safety elements. They serve for your safety.
